“Simpson Strong-Tie MSTA24 MSTA 24-in.
18-Gauge Galvanized Medium Strap Tie” has been added to your cart.
View cart
Showing 1–40 of 97 resultsSorted by popularity
$ 0.94Features:
LU-series hangers are tested, load rated and code compliant
The LU series installs using several fastener selections with tested allowable loads
Precision-formed engineered for installation ease and design value
Seat width: 1-9/16 in.
Nominal joist size: 2×8, 2×10
$ 4.07Features:
An indented embedment line ensures accurate embedment depth
Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
Load rated for wind and seismic forces
20-in. exposed length
Embed 4 in. into a poured concrete bond beam or grouted block wall
$ 0.52Features:
Embossments in bend line strengthen connection
The top flange features an arrow line indicator to aid correct installation
Made from 18-gauge steel
Galvanized (G90) for extra corrosion resistance
$ 0.65Features:
Embossments in bend line strengthen connection
The top flange features an arrow line indicator to aid correct installation
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 1.13Features:
Anchors mudsill to concrete block, poured walls or slab foundations
Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 2.13Features:
Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
Loads have been increased for wind and seismic forces
Floor-to-floor clear span application
For use on the edge of 2x members
Length: 24 in.
This item has been DISCONTINUED.
$ 52.79Features:
Exceptional performance superior bond-strength values at long-term elevated temperature of 110 degreeF (43 degreeC) using optimized drill bit diameters
Tested and assessed in accordance with ICC-ES AC308 and ACI 355.4 for use in cracked and uncracked normal-weight and lightweight concrete
Design flexibility can be specified for dry or water-saturated conditions when temperatures range from -40 degreeF (-40 degreeC) to 176 degreeF (80 degreeC)
Jobsite versatility can be installed in dry, water-saturated or water-filled holes in base materials with temperatures between 40 degreeF (4 degreeC) and 100 degreeF (38 degreeC)
Maximized production and safety qualified for installation using the Speed Clean? DXS dust extraction drilling system as an alternative to the conventional blow-brush-blow hole-cleaning method
$ 0.43Features:
Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
Positive-set marking system indicates when anchor is properly set
Zinc-plated carbon steel
Length: 2 in.
Drill bit diameter: 5/8 in.
Minimum order quantity: 50
Order in multiples of: 50
$ 1.22Features:
Can be used to make a connection to either the top or bottom plate
Embossment in the angle reinforces the plate
Sill plate installation: fill all round holes
Width: 1-3/8 in.
Height: 6-11/16 in.
8% OFF
$ 270.99Original price was: $270.99. $ 249.31Current price is: $249.31. Features:
Tabs inside the MPBZ provide the code-required 1 in. post standoff to help prevent rot from standing water and ground moisture
Stamped indicators and internal tabs identify the required concrete embedment depth
Strategically placed holes simplify installation to allow template attachment
Optional obround holes have been added for attaching trim material
Additional holes at the embedment line allow standing water to exit and a point of visual inspection
This item has been DISCONTINUED.- SEE ET3G22-N FOR UPDATED MODEL
$ 21.83Features:
Minimum concrete edge distance is 5 in.
Minimum concrete block left-to-right edge distance is 20 in.
Length: 51 in.
For additional length, an MST strap can be attached using 1/2- bolts through existing holes
Made from 12-gauge steel
$ 3.81Features:
Available with the bend reversed
Straps do not need to be wrapped over the truss to achieve the allowable load
Versatile with many lengths offered to fit the specific application
Length: 24 in.
Made from 14-gauge steel
$ 6.09Features:
Designed to help resist download forces
The unique two-level embossment provides added stiffness to the top flange
Quick installation
Nominal joist size: 2×6
Made from 14-gauge steel
$ 46.31Features:
Increased uplift resistance for wind or seismic loading
Bolt hole locations meet code-required spacing for optimal capacity
Nominal column size: 6×6
Made from 7-gauge steel
Galvanized (G90) for extra corrosion resistance
$ 1.85Features:
Attaches easily to the concrete form for quick installation
Lays flat on the form board so there is no anchor bolt to finish around
No labor costs involved in drilling plates and aligning holes
Flat design eliminates chances of modification in prefabricated walls
Eliminates the need to notch studs due the anchor bolts being placed where it will interfere
$ 5.53Features:
Chamfered top designed to prevent mushrooming during installation
Qualified for static and seismic loading conditions (seismic design categories A through F)
Suitable for horizontal, vertical and overhead applications
Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
Tested per ACI355.2 and AC193
$ 3.00Features:
Replaces additional framing and toe-nailing
Suitable for most installations on nominal 2×10 or 2×12 header/rim board
May be installed flush with the top of the carrying member or lower on the face
Interchangeable for left or right applications
Made from 18-gauge steel
6% OFF
$ 75.99Original price was: $75.99. $ 71.43Current price is: $71.43. Features:
Manual dispensing tool
EDT22S features a steel carriage and is engineered for high-volume, continuous use
The tool can be easily convert from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridge
For 22 oz. adhesive cartridges
$ 20.79Features:
The nailing pattern allows for nailing to the edges of double 2x’s
Strap nail slots are countersunk to provide a lower nail head profile
The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
Standard strap length: 24-5/8 in.
Made from 12-gauge steel
$ 1.66Features:
Embossment feature provides strength at the bend
Features optional diamond holes of various uplift capacities with min./max. nailing configurations
Can be installed before or after placement of wall
Width: 1-1/2 in.
Length: 7-7/8 in.
$ 26.60Features:
An 18-element mixing nozzle for use with 22 oz. and 56 oz. epoxy adhesive cartridges
This is a one-piece nozzle with integrated nut (separate retaining nut not required)
Once the epoxy hardens in the nozzle it can be used as a cap to keep the product fresh
Each nozzle is 14 in. long for use in all depths of holes
Quantity: 5
$ 64.55Features:
Uses Strong-Drive screws, which allow for fast installation, reduced reveal and high capacity
Provides a 1-in. standoff between post and concrete that meets code requirements
Embeds in wet concrete at time of pour
The standoff base reduces the potential for decay at post and column ends
Shipped with base plate assembled
$ 7.69Features:
Features double-shear nailing which distributes the load through two points on each joist nail for greater strength
Allows for the use of fewer nails, faster installation, and the use of standard nails for all connections
Do not bend or remove tabs
Nominal joist size: 4×8
Made from 14-gauge steel
$ 84.56Features:
Type-17 point enables easy driving with no predrilling and minimal wood splitting
3/8-in. hex head with 0.48-in. integrated washer
Head is stamped with the Simpson Strong-Tie — sign and fastener length for easy identification after installation
Serrated threads
Replacement driver bit model BITHEXR38-134 (not included)
$ 132.72Features:
WSV134S features a redesigned tip and thread pattern to provide easy starts and up to 25% less torque
Less installation torque also means less wear on tools
Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
$ 13.95Features:
Provides a positive connection for a post to a wood deck
Stronger than angled nailing or screw fastening
Reduces the chance of the post splitting and eliminates nailing into end grain
Not recommended for non top-supported installations (such as fences or unbraced carports)
Nominal post size: 4×6
$ 4.20Features:
A versatile, heavy-duty strap for a variety of connections and splices where extra strength is needed
Straight lines and chamfered edges offer a better appearance
Provides support in home repair and construction projects
Easy nailing pattern for connecting the sides of 2x members
Width: 1-3/8 in.
$ 13.41Features:
SUL = skewed left
Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
Nominal joist size: 2×6 or 2×8
4% OFF
$ 308.77Original price was: $308.77. $ 296.41Current price is: $296.41. Features:
Flat head
SSDWP3S305 has a unique box thread design with raised-ridge technology greatly reduces driving torque
Specially designed sharp point penetrates hard wood products with ease
6-lobe drive helps prevent driver-bit cam-out while driving easier and extending bit life (replacement bit BITTX25)
Length: 3 in.
$ 2.39Features:
Anchors mudsill to concrete block, poured walls or slab foundations
Fill CMU cell with concrete grout first, then place MASB into the grouted cell and adjust into position
Attach mudsill to anchor only after the concrete grout cures
Nominal sill size: 2×4, 2×6
Made from 16-gauge steel
$ 32.01Features:
Ideal for retrofit or new construction projects
Can be installed with cast-in-place or post-installed anchor bolts
Four-ply formed steel provides increased tension capacity
Anchor bolt washers not required
2-1/2 in. width x 16 in. length
$ 1.89Features:
Patented double-shear nailing design provides greater strength with fewer nails
Speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Nominal joist size: 2×8 and 2×10
$ 17.17Features:
The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
.300-in. head diameter / .157-in. shank diameter
1-in. washer
$ 3.03Features:
LUC-series hangers are tested, load rated and code compliant
The LUC series installs using several fastener selections with tested allowable loads
Suitable for nominal 2×10 and 2×12 lumber
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 189.99Features:
Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
Less installation torque also means less wear on tools
Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
WSV screws can be easily backed out, allowing for future access to floor cavities
$ 4.09Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 5/8 in.
Length: 6 in.
Made from mechanically galvanized carbon steel
$ 77.26Features:
SDS screws are supplied with the holdowns to ensure proper fasteners are used
No stud bolts to countersink at openings
Height: 14 in.
Made from 7-gauge steel
Galvanized (G90) for extra corrosion resistance
Features:
Holds the rafter or truss on both sides for high lateral load resistance
Used for a variety of connections where one member crosses another
Can be installed on inside or outside of wall, or both sides
Can be installed with flanges facing either inward or outward
Made from 18-gauge steel
