“Simpson Strong-Tie SDWC15600B-KT Strong-Drive SDWC TRUSS Screw .152 in. x 6 in. T30 Clear-Zinc Coat Orange 500-Qty” has been added to your cart.
View cart
Showing 41–80 of 97 resultsSorted by popularity
Features:
H1Z holds the rafter or truss on both sides for high lateral load resistance
Used for a variety of connections where one member crosses another
Can be installed on inside or outside of wall, or both sides
Can be installed with flanges facing either inward or outward
Made from 18-gauge steel
$ 2.29Features:
An indented embedment line ensures accurate embedment depth
HETA16 is compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
Load rated for wind and seismic forces
12-in. exposed length
Embed 4 in. into a poured concrete bond beam or grouted block wall
$ 13.49Features:
LGT2 is suitable for retrofit applications
The embossments add stiffness in crucial areas for improved performance
Simple to install and can be installed on the inside or outside of the wall
Load rated to resist high-wind forces
2-ply
$ 53.96Features:
Attaches a post to existing concrete for decks, patio covers and other top-supported structures
ABU66Z is slotted for adjustability
Designed for versatility, cost-effectiveness and maximum uplift performance
Nominal post size: 6×6
$ 2.41Features:
Patented double-shear nailing design provides greater strength with fewer nails
LUS210Z offers speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Nominal joist size: 2×10, 2×12, 2×14
$ 4.42Features:
Patented double-shear nailing design provides greater strength with fewer nails
LUS210-2Z features speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Nominal joist size: Double 2×10 and Double 2×12
$ 30.43Features:
BC6Z provides a positive connection for a post to a wood deck
Stronger than angled nailing or screw fastening
Reduces the chance of the post splitting and eliminates nailing into end grain
Not recommended for non top-supported installations (such as fences or unbraced carports)
Nominal post size: 6x
$ 8.12Features:
LUS28-3Z offers a patented double-shear nailing design that provides greater strength with fewer nails
Speed prongs for fast and easy installation
Angled joist nailing easier in tight spaces
Do not bend or remove tabs
Nominal joist size: Triple 2×8 and Triple 2×10
$ 3.37Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 3/4 in.
Length: 6-1/4 in.
Made from zinc-plated carbon steel
$ 35.93Features:
SDS-plus shank power setting tool for DIAB anchors
For use with Simpson Strong-Tie Drop-In models DIAB50, DIABL50, and DIAB50C
Sets drop-ins for overhead applications
Drop-in anchors are sold separately
Made from carbon steel
$ 0.74Features:
MP24 is versatile and easy-to-use mending plate for wood-to-wood connections
These non-structural connectors are ideal for general fix-up work
Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
Used for non-structural applications only (not for truss applications)
Width: 2 in.
$ 0.96Features:
Bolt diameter: 3/8 in.
Dimensions: 2 in. x 2 in.
BP 3/8-2 is made from 3/16 in. steel
Uncoated steel construction
$ 2.24Features:
THD50300H is qualified for static and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
Hex-washer head requires no separate washer and provides a clean installed appearance
$ 53.96Features:
HUC210-3Z features extra optional triangle holes for additional load
HUC-series hangers are tested, load rated and code compliant
Install wood joists to wood, masonry and concrete
Seat width: 4-11/16 in.
Nominal joist size: Triple 2×10
$ 46.82Features:
ABU46Z attaches a post to existing concrete for decks, patio covers and other top-supported structures
Features 1-in. standoff to help prevent rot at post end
Slotted for adjustability
Designed for versatility, cost-effectiveness and maximum uplift performance
Nominal post size: 4×6
$ 26.71Features:
STHD14 offers a nailing pattern that allows nailing to the edges of double 2x’s
Strap nail slots are countersunk to provide a lower nail head profile
The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
Standard strap length: 26-1/8 in.
Made from 12-gauge steel
$ 210.59Features:
Sized to fit nominal 2x lumber
CS16 is packaged in lightweight cartons
Length: 150 ft.
Made from 16-gauge steel
Galvanized (G90) for extra corrosion resistance
$ 5.31Features:
THD50500HMG is qualified for static and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
Hex-washer head requires no separate washer and provides a clean installed appearance
$ 18.35Features:
BC60Z provides a positive connection for a post to a wood deck
Stronger than angled nailing or screw fastening
Reduces the chance of the post splitting and eliminates nailing into end grain
Not recommended for non top-supported installations (such as fences or unbraced carports)
Nominal post size: 6x
$ 603.93Features:
Semi-automatic and fast cycling
PT-27 is Compatible with Simpson Strong-Tie powder loads and pins
Fastener length: 1/2? 2-1/2 in. (3 in. washered)
Fastener type: .300 in. or 8 mm-headed fasteners or 1/4-in.-20 threaded studs
Load caliber: 0.27 strip loads, brown through red (levels 2?5)
$ 4.20Features:
THDB62400H is qualified for static and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
Hex-washer head requires no separate washer and provides a clean installed appearance
$ 20.24Features:
SUL = skewed left
Can accommodate joists skewed 40 to 50 degrees
Angled nail slots direct nails for proper installation
Nominal joist size: 2×10 or 2×12
Made from 16-gauge steel
$ 16.04Features:
The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
.300-in. head diameter / .157-in. shank diameter
1-in. washer
$ 20.24Features:
SUR = skewed right
Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
Nominal joist size: 2×10 or 2×12
$ 3.05Features:
Qualified for static and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
Hex-washer head requires no separate washer and provides a clean installed appearance
$ 5.59Features:
Can be installed filling round holes only, or filling round and triangle holes for maximum values
Nominal joist size: 2×6
Made from 16-gauge steel
Galvanized (G90) for extra corrosion resistance
$ 2.66Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 3/4 in.
Length: 4-1/4 in.
Made from zinc-plated carbon steel
$ 10.71Features:
Attaches a post to existing concrete for decks, patio covers and other top-supported structures
Features 1-in. standoff to help prevent rot at post end
Slotted for adjustability
Designed for versatility, cost-effectiveness and maximum uplift performance
Nominal post size: 4×4
$ 51.97Features:
CDT10S Manual dispensing tool
Features a steel carriage for ultimate durability and is engineered for continuous, high-volume use
Double-gripping plates that help extend tool life
For SET3G10 adhesive and other 10 oz. single-cartridge adhesives
Features:
Discontinued
Designed for nail- or bolt-on applications
For use in vertical or horizontal applications
5/16 in. seat thickness
Length: 19-3/4 in.
Made from 12-gauge steel
$ 28.56Features:
Attaches a post to existing concrete for decks, patio covers and other top-supported structures
Features 1-in. standoff to help prevent rot at post end
Slotted for adjustability
Designed for versatility, cost-effectiveness and maximum uplift performance
Nominal post size: 6×6
$ 6.68Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 5/8 in.
Length: 8-1/2 in.
Made from mechanically galvanized carbon steel
This item has been DISCONTINUED.
$ 1.29Features:
A versatile and easy-to-use mending plate for wood-to-wood connections
These non-structural connectors are ideal for general fix-up work
Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
Used for non-structural applications only (not for truss applications)
Width: 3 in.
$ 9.51Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 5/8 in.
Length: 10 in.
Made from mechanically galvanized carbon steel
$ 1.72Features:
An indented embedment line ensures accurate embedment depth
Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
Load rated for wind and seismic forces
8-in. exposed length
Embed 4 in. into a poured concrete bond beam or grouted block wall
$ 5.54Features:
Qualified for static and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
Hex-washer head requires no separate washer and provides a clean installed appearance
$ 2.83Features:
Helps resist tension forces
Staggered nail pattern reduces the potential for splitting
Width: 1-1/4 in.
Length: 21-5/8 in.
Made from 16-gauge steel
$ 266.58Features:
Cap-style head countersinks fully into the double top plate to avoid interference with drywall or finish trades
Wide tolerance on installation angle makes it easy to install the SDWC correctly
Can be installed from inside the structure, eliminating exterior work on the upper stories and enhancing job safety
Fastening can be performed before or after exterior sheathing is applied for added flexibility
Type-17 point for faster starts and easier driving
$ 2.59Features:
Available with the bend reversed; specify –REV- after the model number, such as HTS16-REV
Versatile with many lengths offered to fit the specific application
Straps do not need to be wrapped over the truss to achieve the allowable load
Length: 16 in.
Made from 14-gauge steel
Simpson Strong-Tie SDWC15600B-KT Strong-Drive SDWC TRUSS Screw .152 in. x 6 in. T30 Clear-Zinc Coat Orange 500-Qty 
