“Simpson Strong-Tie STB2-75812 Strong-Bolt 2 3/4 in. x 8-1/2 in. Wedge Anchor” has been added to your cart.
View cart
Showing 41–80 of 941 resultsSorted by popularity
14% OFF
$ 43.29Original price was: $43.29. $ 37.22Current price is: $37.22. Features
Combined with the Outdoor Accents structural wood screw (SDWSDBB), it provides a structural load-rated solution
Easy to install
STN22-R24 is code listed in IAPMO-UES ER-192
$ 155.89Features
APVB1010R has an adjustable design for fine-tuning of post placement
Corrosion-resistant
1″ standoff
Strong connection
Building code compliant
$ 9.39Features
Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
Easily attaches knee braces to posts or beams
APVKB45-6 adds decorative flair to knee brace connections
$ 0.00FEATURES/BENEFITS
Available in 10 mil and 15 mil thicknesses, in 200′ (61 m) long rolls.
Helps reduce the penetration of moisture and water vapor through the slab into the structure.
Helps reduce fungus, mildew, and mold.
Helps reduce radon gas from entering a structure.
Resistant to methane gas.
Tough enough to withstand normal construction jobsite conditions and traffic … will not crack, puncture, snag, split, or tear easily.
Installs quickly and easily over tamped grade … no gravel, fill, or sand needed.
12′ (15 mil) and 15′ (10 mil) wide rolls require fewer seams in application.
PERMINATOR prevents uncontrolled moisture from entering the slab allowing the slab to maintain the maximum slab moisture emission rate and relative humidity level as allowed by flooring manufacturer’s specifications.
10 or 15 mil thickness clearly marked on membrane for easy visual identification on jobsite.
VOC content is 0 g/L.
Made in America.
$ 21.83Features:
Minimum concrete edge distance is 5 in.
Minimum concrete block left-to-right edge distance is 20 in.
Length: 51 in.
For additional length, an MST strap can be attached using 1/2- bolts through existing holes
Made from 12-gauge steel
$ 3.81Features:
Available with the bend reversed
Straps do not need to be wrapped over the truss to achieve the allowable load
Versatile with many lengths offered to fit the specific application
Length: 24 in.
Made from 14-gauge steel
$ 28.39Features
ET3G22-Nis suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
Ideal for general doweling and threaded rod applications
Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
Anchor Technical Notes
$ 18.19Features
APVL6 provides strong 90° reinforcement
Sleek, contemporary design
Premium corrosion resistance
Versatile installation
Heavy-duty construction
$ 6.09Features:
Designed to help resist download forces
The unique two-level embossment provides added stiffness to the top flange
Quick installation
Nominal joist size: 2×6
Made from 14-gauge steel
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
$ 4.69Features
The Avant Collection features straight edges and chamfered corners for a clean, timeless design
Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
The APVA4 is designed for use with 4x or larger lumber
$ 29.95Features
PFM1411020 is designed for standard ANSI tolerance drill bits
Patented thread design offers low installation torque
Tough threads for tapping high strength concrete
Ratchet teeth on underside of hex washer head lock against the fixture
Can be installed closer to the edge than traditional expansion anchors
$ 1.99Features
APVA21 provides strong 90° support
Decorative design
Durable construction
Corrosion Resistant
$ 0.00ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
11% OFF
$ 48.19Original price was: $48.19. $ 42.88Current price is: $42.88. Features
APHH610 offers a durable construction for reliability
Concealed-Flange Design
Easy Installation
Versatile Application
$ 48.19Features
APHH610R features a concealed-flange design
Heavy-Duty Construction
Easy Installation
Versatile Applications
$ 23.49Features
Strong & Durable
Decorative & Functional
Secure Connection
APHH46 is coated with Zmax for corrosion resistance.
$ 12.79Features
APVT4 is designed for 90° Connections
The Avant Collection features connectors with straight edges and chamfered corners for a clean and timeless contemporary design
Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
$ 44.69Features
Easy installation
Decorative and functional
Durable coating
SDWS22512DBB-R50 offers strong structural hold
$ 46.31Features:
Increased uplift resistance for wind or seismic loading
Bolt hole locations meet code-required spacing for optimal capacity
Nominal column size: 6×6
Made from 7-gauge steel
Galvanized (G90) for extra corrosion resistance
$ 1.85Features:
Attaches easily to the concrete form for quick installation
Lays flat on the form board so there is no anchor bolt to finish around
No labor costs involved in drilling plates and aligning holes
Flat design eliminates chances of modification in prefabricated walls
Eliminates the need to notch studs due the anchor bolts being placed where it will interfere
$ 24.99Features
Allows easy installation of 4×4 wood posts on existing concrete
Black powder-coated steel construction for reliable strength and decorative finish
Approved for installation with the Strong-Drive® SDS Connector screw
$ 20.99Features
APVT6 offers a strong 90° connection
Durable Steel Construction
Easy Installation
Versatile Application
$ 5.53Features:
Chamfered top designed to prevent mushrooming during installation
Qualified for static and seismic loading conditions (seismic design categories A through F)
Suitable for horizontal, vertical and overhead applications
Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
Tested per ACI355.2 and AC193
$ 3.00Features:
Replaces additional framing and toe-nailing
Suitable for most installations on nominal 2×10 or 2×12 header/rim board
May be installed flush with the top of the carrying member or lower on the face
Interchangeable for left or right applications
Made from 18-gauge steel
$ 640.99Features:
Poly Coated Wire Resists Rust and Corrosion
Use with epoxy coated rebar
19 Guage Rebar Tie Wire
For use with MAX RB441T TwinTier and RB401T-E TwinTier
$ 39.46Features
PFM1411380 is designed for standard ANSI tolerance drill bits
Patented thread design offers low installation torque
Tough threads for tapping high strength concrete
Ratchet teeth on underside of hex washer head lock against the fixture
Can be installed closer to the edge than traditional expansion anchors
$ 6.69Features
SD10112DBBR50 is designed for Outdoor Accents Connectors
Easy installation
No-pre-drilling required
Optimized strength
Decorative & durable finish
10% OFF
$ 15.99Original price was: $15.99. $ 14.39Current price is: $14.39. Features
BCS2-3/6Z BCS opposing flanges provide increased lateral resistance
Double-shear nailing for optimal strength
Sized specifically for multi-2x widths
$ 12.79Features
APT4 offers ZMAX galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
Wood Construction Connectors Resources
$ 26.19Features
Use the SDWS22312DBB-R50 Outdoor Accents structural screw without the washer as a wood-to-wood fastener
Deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
Patented SawTooth point (3 1/2″ and 5 1/2″ screws only) ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications; Type-17 point on 2″ screw ensures fast starts
$ 2.69Features
APDMW56 enhances wood connections
Durable & corrosion resistant
Versatile use
Patented design
$ 24.49Features
APB44 offers adjustable sotted design for flexibility.
Corrosion-resistant finish
1″ standoff
Code-compliant strength
Versatile fit
$ 172.60Features:
Made of carbon steel wire
Tangle-free unwinding
Full case count – 20 rolls
$ 39.90Features
PFM1411100 is designed for standard ANSI tolerance drill bits
Patented thread design offers low installation torque
Tough threads for tapping high strength concrete
Ratchet teeth on underside of hex washer head lock against the fixture
Can be installed closer to the edge than traditional expansion anchors
$ 101.59Features
Strong and secure
Adjustable fit
APVB88 offers moisture protection
Decorative finish
12% OFF
$ 124.34Original price was: $124.34. $ 109.41Current price is: $109.41. Features
Certified welds for confidence in strength and loading
Uplift loads increased for earthquake or wind loading
Bolt spacing that meets NDS code requirements to ensure optimal performance
Diamond holes to provide temporary fastening
6% OFF
$ 75.99Original price was: $75.99. $ 71.43Current price is: $71.43. Features:
Manual dispensing tool
EDT22S features a steel carriage and is engineered for high-volume, continuous use
The tool can be easily convert from dispensing a 22 oz. 1:1 ratio cartridge to a 16.5 oz. 2:1 ratio cartridge
For 22 oz. adhesive cartridges
Simpson Strong-Tie STB2-75812 Strong-Bolt 2 3/4 in. x 8-1/2 in. Wedge Anchor 
![TW1061T-PC-[Roll]](https://www.heydensupply.com/wp-content/uploads/2021/01/max-tw1061t-pc-poly-coated-tie-wire-1.jpg)
