“[50 Pack] Simpson Strong-Tie THD37300H6SS Titen HD 3/8 in. x 3 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor” has been added to your cart.
View cart
Showing 121–160 of 176 resultsSorted by popularity
$ 47.54Features
THD37400H uses a specialized heat-treating process creates tip hardness for better cutting
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 42.54Features
THDB25312H is tested in accordance with ACI 355.2, AC193 and AC106
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 43.00Features
THDB62612HMGF1 is code-listed for exterior use
Fully removable
Hex washer head
Optimized thread design
$ 288.46Features
Less carbon steel, less expansion
Type 316 stainless steel provides superior corrosion resistance
THD37300H6SS is tested in accordance with ACI355.2, AC193 and AC106
$ 45.08Features
THDB25400H is tested in accordance with ACI 355.2, AC193 and AC106
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 54.68Features
THD50500H is tested in accordance with ACI 355.2, AC193 and AC106
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 54.85Features
THDT75600HMG is tested in accordance with ACI 355.2, AC193 and AC106
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 85.18Features
THDB25178CS is tested in accordance with ACI 355.2, AC193 and AC106
6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
Countersunk head allows screw anchor applications incompatible with a hex head
$ 72.85Features
THD37300HMG is tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Reuse of the anchor will not achieve listed loads and is not recommended
$ 90.00Features
THD37400HMG is tested in accordance with ACI 355.2, AC193 and AC106
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 43.92Features
THD50600WH is tested in accordance with ACI 355.2 and AC193
Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
Washer head allows screw anchor applications incompatible with a hex head
$ 105.69Features
Hex-washer head requires no separate washer, unless required by code
Removable —THDB62612HMG is ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 222.15Features
Ideal for exterior or corrosive environments
Less carbon steel, less expansion
THD50800H4SS Tested in accordance with ACI355.2, AC193 and AC106
$ 41.85Features
High Performance
Efficient load transfer
Fast installation
THDB62500H is heat treated at the tip to ensure optimal hardness
$ 45.49Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
Standard fractional sizes
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 40.15Features
Engineered for strength
Optimized for multiple loads
Easily removable
THD75700H offers an advanced thread design for a secure hold
$ 202.26Features
THDC25400H6SS is ideal for exterior or corrosive environments
Less carbon steel, less expansion
Tested in accordance with ACI355.2, AC193 and AC106
$ 34.79Features
THDB25300H is created with an efficient thread design
Seismic-rated
Fast installation
Durable & strong
$ 79.38Features
High-Strength Performance
Seismic & Wind Approved
Heat-Treated Durability
THDB62100H eliminates the need for a separate washer, unless directed otherwise by code
$ 114.28Features
Superior performance
Advanced thread design
Low-profile installation
THD37500CS is removable for temporary use
$ 97.23Features
High-strength performance
Corrosion resistance
Heat-treated durability
THD50600HMG is tested and code compliant for exterior applications
$ 188.31Features
Mechanically galvanized coating
Standard Fractional Sizes
Fully Removable
THD50800HMG is code listed for exterior use, ensuring reliable, compliant performance.
$ 48.86Features
High-strength performance
Countersunk head design
6-lobe drive system
THDB25234CS has been tested to meet ACI 355.2, AC193, AC106 standards
$ 68.15Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
Standard fractional sizes
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 288.62Features
Ideal for exterior or corrosive environments
Less carbon steel, less expansion
THD50800H6SS is tested in accordance with ACI355.2, AC193 and AC106
$ 73.54Features
Code compliant
Fully removable
THD75812HMG undercutting thread design offers superior load transfer
$ 62.46Features
Versatile applications
Low installation torque
Removable
THD501200H offers a zinc-plated finish for corrosion resistance
$ 39.00Features
Efficient load transfer
Clean finish
THDB25234H is code compliant with (ACI355.2, AC193, and AC106)
$ 72.15Features
High-strength performance
Undercut thread design
Fully removable
THDB62500HMG is mechanically galvanized for corrosion resistance (ASTM B695 Class 65)
$ 155.69Features
THDB62600H6SS is produced from 316 SS for corrosion resistance
Innovative design allows for interlock.
Easy installation
High performance
$ 244.62Features
THD37400H4SS is ideal for exterior or corrosive environments
Less carbon steel, less expansion
Installs with an impact wrench or by hand tool
Tested in accordance with ACI355.2, AC193 and AC106
$ 266.92Features
Corrosion Resistant
Fast and Efficient Installation
Superior Holding Power
THD37500H4SS has been tested for code compliance
$ 40.37Features
Excellent for use in cold weather conditions or applications where fast cure is required.
superior sustained load performance at elevated temperature.
can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 180°F (82°C).
Approved for installation with vacuum-drill bit system without further hole cleaning.
Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads.
Easy hole-cleaning procedure — no power-brushing required.
$ 121.41Features
superior bond strengths permit ductile solutions in high seismic areas.
improved sustained load performance at elevated temperature.
can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
Recognized per ICC ES AC308
Approved for installation with multiple vacuum-drill bit systems without further hole cleaning.
Wire brush hole-cleaning system for conventional blow-brush-blow cleaning method for anchoring.
With higher bond strengths, ductile solutions can often be achieved with SET-3G in high seismic areas.
Low-odor formulation.
no performance difference between water-saturated concrete, water-filled holes, or submerged concrete.
For use with potable water.
This item has been DISCONTINUED.
$ 2.39Features:
Anchors mudsill to concrete block, poured walls or slab foundations
Fill CMU cell with concrete grout first, then place MASB into the grouted cell and adjust into position
Attach mudsill to anchor only after the concrete grout cures
Nominal sill size: 2×4, 2×6
Made from 16-gauge steel
$ 4.09Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 5/8 in.
Length: 6 in.
Made from mechanically galvanized carbon steel
$ 5.29Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 5/8 in.
Length: 10 in.
Made from zinc-plated carbon steel
$ 3.37Features:
One-piece, wrap-around clip ensures uniform holding capacity
Threaded end is chamfered for ease of starting nut
Diameter: 3/4 in.
Length: 6-1/4 in.
Made from zinc-plated carbon steel
$ 35.93Features:
SDS-plus shank power setting tool for DIAB anchors
For use with Simpson Strong-Tie Drop-In models DIAB50, DIABL50, and DIAB50C
Sets drop-ins for overhead applications
Drop-in anchors are sold separately
Made from carbon steel
[50 Pack] Simpson Strong-Tie THD37300H6SS Titen HD 3/8 in. x 3 in. Type 316 Stainless-Steel Heavy-Duty Screw Anchor 
