“Simpson Strong-Tie FPBB44 E-Z Post Base for 4×4 – Black Powder-Coated” has been added to your cart.
View cart
Showing 1–40 of 162 resultsSorted by popularity
-
$0.94
Features:
- LU-series hangers are tested, load rated and code compliant
- The LU series installs using several fastener selections with tested allowable loads
- Precision-formed engineered for installation ease and design value
- Seat width: 1-9/16 in.
- Nominal joist size: 2×8, 2×10
-
$4.07
Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 20-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
$0.52
Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
$5.19
Features
- The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
- May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
- May be sloped up from 0° to 45°.
- Can be installed using nails or Strong-Drive SD Connector screws.
-
$0.65
Features:
- Embossments in bend line strengthen connection
- H2.5AZ top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
-
$2.13
Features:
- Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
- Loads have been increased for wind and seismic forces
- Floor-to-floor clear span application
- For use on the edge of 2x members
- Length: 24 in.
-
$4.09
Features
- Clean design
- Durable construction
- Easy installation
- APLH26R is made to be corrosion-resistant
-
$9.39
Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- APVA6 is stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
-
$4.09
Features
- APLH26 offers a concealed-flange design
- Durable & Corrosion-Resistant
- Easy Installation
- Strong structural support
-
$1.08
Features
- LUS24Z cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested, load rated and code compliant
-
$31.49
Features
- Black powder-coated steel construction for reliable strength and decorative finish
- FPBS44 is approved for installation with the Strong-Drive SDS Connector screw
-
$23.49
Features
- APHH46R offers heavy-duty strength
- Concealed Flanges
- Durable Construction
- Corrosion-Resistant
-
$8.09
Features
- Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
- Easily attaches knee braces to posts or beams
- APVKB45-4 adds decorative flair to knee brace connections
-
$1.22
Features:
- Can be used to make a connection to either the top or bottom plate
- Embossment in the angle reinforces the plate
- Sill plate installation: fill all round holes
- Width: 1-3/8 in.
- Height: 6-11/16 in.
-
$249.31
Features:
- Tabs inside the MPBZ provide the code-required 1 in. post standoff to help prevent rot from standing water and ground moisture
- Stamped indicators and internal tabs identify the required concrete embedment depth
- Strategically placed holes simplify installation to allow template attachment
- Optional obround holes have been added for attaching trim material
- Additional holes at the embedment line allow standing water to exit and a point of visual inspection
-
$101.59
Features
- APB88R is building code compliant
- 1″ standoff
- Adjustable design
- Versatile compatibility
-
$5.29
Features
- Adjustable slope
- Open U-shape design
- Optimized fastener placement
- Versatile fastening options
- LRU26Z is field installable
-
$6.69
Features
- APRTC2 offers strong and easy installation
- Enhanced durability
- Versatile design
- Secure fastening
-
5% OFF
$101.59 Original price was: $101.59.$96.51Current price is: $96.51.
Features
- APVB88R is designed to meet stringent building codes for seismic or high-wind events
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
$5.59
Features
- APLH210R is Zmax galvanized for corrosion resistance
- Concealed flanges
- Strong and durable
- Easy installation
-
$155.89
Features
- APVB1010R has an adjustable design for fine-tuning of post placement
- Corrosion-resistant
- 1″ standoff
- Strong connection
- Building code compliant
-
$9.39
Features
- Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
- Easily attaches knee braces to posts or beams
- APVKB45-6 adds decorative flair to knee brace connections
-
$21.83
Features:
- Minimum concrete edge distance is 5 in.
- Minimum concrete block left-to-right edge distance is 20 in.
- Length: 51 in.
- For additional length, an MST strap can be attached using 1/2- bolts through existing holes
- Made from 12-gauge steel
-
$3.81
Features:
- Available with the bend reversed
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Versatile with many lengths offered to fit the specific application
- Length: 24 in.
- Made from 14-gauge steel
-
$18.19
Features
- APVL6 provides strong 90° reinforcement
- Sleek, contemporary design
- Premium corrosion resistance
- Versatile installation
- Heavy-duty construction
-
Delivery Estimate Apr 11 - Apr 14
$6.09
Features:
- Designed to help resist download forces
- The unique two-level embossment provides added stiffness to the top flange
- Quick installation
- Nominal joist size: 2×6
- Made from 14-gauge steel
-
$4.69
Features
- Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
- The APVA4 is designed for use with 4x or larger lumber
-
$46.31
Features:
- CB66 features increased uplift resistance for wind or seismic loading
- Bolt hole locations meet code-required spacing for optimal capacity
- Nominal column size: 6×6
- Made from 7-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
$1.99
Features
- APVA21 provides strong 90° support
- Decorative design
- Durable construction
- Corrosion Resistant
-
11% OFF
$48.19 Original price was: $48.19.$42.88Current price is: $42.88.
Features
- APHH610 offers a durable construction for reliability
- Concealed-Flange Design
- Easy Installation
- Versatile Application
-
$1.66
Features:
- Embossment feature provides strength at the bend
- Features optional diamond holes of various uplift capacities with min./max. nailing configurations
- Can be installed before or after placement of wall
- Width: 1-1/2 in.
- Length: 7-7/8 in.
-
$48.19
Features
- APHH610R features a concealed-flange design
- Heavy-Duty Construction
- Easy Installation
- Versatile Applications
-
$23.49
Features
- Strong & Durable
- Decorative & Functional
- Secure Connection
- APHH46 is coated with Zmax for corrosion resistance.
-
$12.79
Features
- APVT4 is designed for 90° Connections
- The Avant Collection features connectors with straight edges and chamfered corners for a clean and timeless contemporary design
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
-
$24.99
Features
- FPBB44 allows easy installation of 4×4 wood posts on existing concrete
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive SDS Connector screw
-
$20.99
Features
- APVT6 offers a strong 90° connection
- Durable Steel Construction
- Easy Installation
- Versatile Application
-
$3.00
Features:
- Replaces additional framing and toe-nailing
- Suitable for most installations on nominal 2×10 or 2×12 header/rim board
- May be installed flush with the top of the carrying member or lower on the face
- Interchangeable for left or right applications
- Made from 18-gauge steel
-
10% OFF
$15.99 Original price was: $15.99.$14.39Current price is: $14.39.
Features
- BCS2-3/6Z BCS opposing flanges provide increased lateral resistance
- Double-shear nailing for optimal strength
- Sized specifically for multi-2x widths
-
$12.79
Features
- APT4 offers ZMAX galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
Wood Construction Connectors Resources
