“Simpson Strong-Tie APVB88R Adjustable Post Base for 8×8 posts with Z-MAX Powder Coating” has been added to your cart.
View cart
Showing 1–40 of 937 resultsSorted by popularity
-
![TW1061T-USA [Roll]](https://www.heydensupply.com/wp-content/uploads/2020/11/TW1061T-1000x1000-1-600x600.jpg "TW1061T-USA [Roll]")
$289.88
Features:
- Full Case Containing 30 Rolls of Tie Wire
- Buy from an authorized Max USA Master Distributor
- Annealed steel wire – diameter 1.0mm
- For use with MAX RB441T TwinTier, RB611T, and RB401T-E TwinTier
-
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- Spacing: 6 x 6
- W/D Designation: W2.9/W2.9
- Gauge: 6/6
- Weight: 42LBS
-
$0.94
Features:
- LU-series hangers are tested, load rated and code compliant
- The LU series installs using several fastener selections with tested allowable loads
- Precision-formed engineered for installation ease and design value
- Seat width: 1-9/16 in.
- Nominal joist size: 2×8, 2×10
-
$4.07
Features:
- An indented embedment line ensures accurate embedment depth
- The HETA24 is compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 20-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
$0.52
Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
$5.19
Features
- The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
- May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
- May be sloped up from 0° to 45°.
- Can be installed using nails or Strong-Drive SD Connector screws.
-
$0.65
Features:
- Embossments in bend line strengthen connection
- H2.5AZ top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
-
![TW1061T-USA [Roll]](https://www.heydensupply.com/wp-content/uploads/2020/07/TW1061T-USA-Front-1-600x600.png "TW1061T-USA [Roll]")
$370.85
Features:
- Wire steel is melted, annealed, and drawn in the U.S.A
- Steel mill certification available
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
$18.00
Features
- AT3G10 offers excellent for use in cold weather conditions or applications where fast cure is required
- Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
- Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
- Base material installation temperatures down to 0°F (-18°C)
- Use in grout-filled CMU construction
-
$1.13
Features:
- MAB15Z anchors mudsill to concrete block, poured walls or slab foundations
- Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
![TW1061T-EG [Roll]](https://www.heydensupply.com/wp-content/uploads/2021/01/TW1061T.jpg)
$366.10
Features:
- Galvanized Wire Resists Rust and Corrosion
- Steel mill certification available
- 19 Guage Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
$2.13
Features:
- Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
- Loads have been increased for wind and seismic forces
- Floor-to-floor clear span application
- For use on the edge of 2x members
- Length: 24 in.
-
$4.09
Features
- Clean design
- Durable construction
- Easy installation
- APLH26R is made to be corrosion-resistant
-
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 20′ sticks
- Available for fabrication
-
$9.39
Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- APVA6 is stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
-
$279.64
Features
- 21 Gauge Steel Tie Wire
- Bare steel with no coating
- For use with MAX RB397, RB398, RB517 and RB518
-
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 20′ sticks
- Available for fabrication
-
$4.09
Features
- APLH26 offers a concealed-flange design
- Durable & Corrosion-Resistant
- Easy Installation
- Strong structural support
-
This item has been DISCONTINUED.
-
This item has been DISCONTINUED.
-
$1.08
Features
- LUS24Z cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested, load rated and code compliant
-
14% OFF
$43.29 Original price was: $43.29.$37.22Current price is: $37.22.
Features
- Combined with the Outdoor Accents structural wood screw (SDWSDBB), it provides a structural load-rated solution
- Easy to install
- STN22-R24 is code listed in IAPMO-UES ER-192
-
$52.79
Features
- SET3G22-N is ICC-ES ESR-4057 approved for post-installed anchoring and rebar splice design
- Includes mixing nozzle and extension for simplified installation
- Low-odor formula, approved for potable water applications
- Compatible with wire brush cleaning or vacuum-drill systems without extra hole cleaning
-
$31.49
Features
- Black powder-coated steel construction for reliable strength and decorative finish
- FPBS44 is approved for installation with the Strong-Drive SDS Connector screw
-
$0.43
Features:
- Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
- Positive-set marking system indicates when anchor is properly set
- Zinc-plated carbon steel
- Length: 2 in.
- Drill bit diameter: 5/8 in.
Minimum order quantity: 50
Order in multiples of: 50
-
$8.09
Features
- Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
- Easily attaches knee braces to posts or beams
- APVKB45-4 adds decorative flair to knee brace connections
-
$46.29
Features
- APVB66R is designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
$23.49
Features
- APHH46R offers heavy-duty strength
- Concealed Flanges
- Durable Construction
- Corrosion-Resistant
-
$15.18
Features
- THDB25178HC20 is tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Reuse of the anchor will not achieve listed loads and is not recommended
-
$1.22
Features:
- SSP can be used to make a connection to either the top or bottom plate
- Embossment in the angle reinforces the plate
- Sill plate installation: fill all round holes
- Width: 1-3/8 in.
- Height: 6-11/16 in.
-
$249.31
Features:
- Tabs inside the MPBZ provide the code-required 1 in. post standoff to help prevent rot from standing water and ground moisture
- Stamped indicators and internal tabs identify the required concrete embedment depth
- Strategically placed holes simplify installation to allow template attachment
- Optional obround holes have been added for attaching trim material
- Additional holes at the embedment line allow standing water to exit and a point of visual inspection
-
$101.59
Features
- APB88R is building code compliant
- 1″ standoff
- Adjustable design
- Versatile compatibility
-
$102.77
- 1-1/2×0.145in Smooth Shank Concrete Pin
- Max Powerlite Fasteners
- Plywood To Concrete
- Fiber Cement Siding To Concrete
- Mechanically Galvanized Carbon Steel
-
$5.29
Features
- Adjustable slope
- Open U-shape design
- Optimized fastener placement
- Versatile fastening options
- LRU26Z is field installable
-
- This item has been DISCONTINUED.- SEE ET3G22-N FOR UPDATED MODEL
-
$6.69
Features
- APRTC2 offers strong and easy installation
- Enhanced durability
- Versatile design
- Secure fastening
-
$10.29
Features
- DFM12722 is available in several head styles
-
5% OFF
$101.59 Original price was: $101.59.$96.51Current price is: $96.51.
Features
- APVB88R is designed to meet stringent building codes for seismic or high-wind events
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
$5.59
Features
- APLH210R is Zmax galvanized for corrosion resistance
- Concealed flanges
- Strong and durable
- Easy installation
