“Simpson Strong-Tie SSP SSP 18-Gauge
Galvanized Single Stud Plate” has been added to your cart.
View cart
Showing 1–40 of 467 resultsSorted by popularity
$ 0.94Features:
LU-series hangers are tested, load rated and code compliant
The LU series installs using several fastener selections with tested allowable loads
Precision-formed engineered for installation ease and design value
Seat width: 1-9/16 in.
Nominal joist size: 2×8, 2×10
$ 4.07Features:
An indented embedment line ensures accurate embedment depth
Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
Load rated for wind and seismic forces
20-in. exposed length
Embed 4 in. into a poured concrete bond beam or grouted block wall
$ 0.52Features:
Embossments in bend line strengthen connection
The top flange features an arrow line indicator to aid correct installation
Made from 18-gauge steel
Galvanized (G90) for extra corrosion resistance
$ 5.19Features
The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
May be sloped up from 0° to 45°.
For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam (see “Max. C1” dimension in Standard Installation table).
Can be installed using nails or Strong-Drive SD Connector screws.
ICC-ES Evaluation Report
$ 0.65Features:
Embossments in bend line strengthen connection
The top flange features an arrow line indicator to aid correct installation
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 1.13Features:
Anchors mudsill to concrete block, poured walls or slab foundations
Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
Made from 18-gauge steel
ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
$ 18.00Features
AT3G10 offers excellent for use in cold weather conditions or applications where fast cure is required
Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
Base material installation temperatures down to 0°F (-18°C)
Use in grout-filled CMU construction
$ 2.13Features:
Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
Loads have been increased for wind and seismic forces
Floor-to-floor clear span application
For use on the edge of 2x members
Length: 24 in.
$ 4.09Features
Clean design
Durable construction
Easy installation
APLH26R is made to be corrosion-resistant
$ 9.39Features
The Avant Collection features straight edges and chamfered corners for a clean, timeless design
Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
$ 4.09Features
APLH26 offers a concealed-flange design
Durable & Corrosion-Resistant
Easy Installation
Strong structural support
This item has been DISCONTINUED.
This item has been DISCONTINUED.
$ 1.08Features
LUS24Z cannot be modified
Works for a wide range of applications
Features speed prongs used to temporarily position and secure the connector for easier and faster installation
LUS-series hangers are tested, load rated and code compliant
$ 52.79Features:
Exceptional performance superior bond-strength values at long-term elevated temperature of 110 degreeF (43 degreeC) using optimized drill bit diameters
Tested and assessed in accordance with ICC-ES AC308 and ACI 355.4 for use in cracked and uncracked normal-weight and lightweight concrete
Design flexibility can be specified for dry or water-saturated conditions when temperatures range from -40 degreeF (-40 degreeC) to 176 degreeF (80 degreeC)
Jobsite versatility can be installed in dry, water-saturated or water-filled holes in base materials with temperatures between 40 degreeF (4 degreeC) and 100 degreeF (38 degreeC)
Maximized production and safety qualified for installation using the Speed Clean? DXS dust extraction drilling system as an alternative to the conventional blow-brush-blow hole-cleaning method
$ 31.49Features
Can be used where quick-to-install posts are needed, including fencing and mailbox applications
Black powder-coated steel construction for reliable strength and decorative finish
Approved for installation with the Strong-Drive® SDS Connector screw
$ 0.43Features:
Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
Positive-set marking system indicates when anchor is properly set
Zinc-plated carbon steel
Length: 2 in.
Drill bit diameter: 5/8 in.
Minimum order quantity: 50
Order in multiples of: 50
$ 46.29Features
APVB66R is designed to meet stringent building codes for seismic or high-wind events
Slotted for adjustability
Features 1″ standoff to help prevent rot at post end
Outdoor Accents side plates available (see APVBDSP)
Fastener holes are slightly offset to help prevent fastener interference
$ 23.49Features
APHH46R offers heavy-duty strength
Concealed Flanges
Durable Construction
Corrosion-Resistant
$ 8.09Features
Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
Easily attaches knee braces to posts or beams
APVKB45-4 adds decorative flair to knee brace connections
$ 15.18Features
Tested in accordance with ACI 355.2, AC193 and AC106
Qualified for static, wind and seismic loading conditions
Thread design undercuts to efficiently transfer the load to the base material
Standard fractional sizes
Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
Reuse of the anchor will not achieve listed loads and is not recommended
$ 1.22Features:
Can be used to make a connection to either the top or bottom plate
Embossment in the angle reinforces the plate
Sill plate installation: fill all round holes
Width: 1-3/8 in.
Height: 6-11/16 in.
8% OFF
$ 270.99Original price was: $270.99. $ 249.31Current price is: $249.31. Features:
Tabs inside the MPBZ provide the code-required 1 in. post standoff to help prevent rot from standing water and ground moisture
Stamped indicators and internal tabs identify the required concrete embedment depth
Strategically placed holes simplify installation to allow template attachment
Optional obround holes have been added for attaching trim material
Additional holes at the embedment line allow standing water to exit and a point of visual inspection
$ 101.59Features
APB88R is building code compliant
1″ standoff
Adjustable design
Versatile compatibility
$ 5.29Features
Adjustable slope
Open U-shape design
Optimized fastener placement
Versatile fastening options
LRU26Z is field installable
This item has been DISCONTINUED.- SEE ET3G22-N FOR UPDATED MODEL
$ 6.69Features
APRTC2 offers strong and easy installation
Enhanced durability
Versatile design
Secure fastening
5% OFF
$ 101.59Original price was: $101.59. $ 96.51Current price is: $96.51. Features
APVB88R is designed to meet stringent building codes for seismic or high-wind events
Features 1″ standoff to help prevent rot at post end
Outdoor Accents side plates available (see APVBDSP)
Fastener holes are slightly offset to help prevent fastener interference
$ 5.59Features
APLH210R is Zmax galvanized for corrosion resistance
Concealed flanges
Strong and durable
Easy installation
14% OFF
$ 43.29Original price was: $43.29. $ 37.22Current price is: $37.22. Features
Combined with the Outdoor Accents structural wood screw (SDWSDBB), it provides a structural load-rated solution
Easy to install
STN22-R24 is code listed in IAPMO-UES ER-192
$ 155.89Features
APVB1010R has an adjustable design for fine-tuning of post placement
Corrosion-resistant
1″ standoff
Strong connection
Building code compliant
$ 9.39Features
Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
Easily attaches knee braces to posts or beams
APVKB45-6 adds decorative flair to knee brace connections
$ 21.83Features:
Minimum concrete edge distance is 5 in.
Minimum concrete block left-to-right edge distance is 20 in.
Length: 51 in.
For additional length, an MST strap can be attached using 1/2- bolts through existing holes
Made from 12-gauge steel
$ 3.81Features:
Available with the bend reversed
Straps do not need to be wrapped over the truss to achieve the allowable load
Versatile with many lengths offered to fit the specific application
Length: 24 in.
Made from 14-gauge steel
$ 28.39Features
ET3G22-Nis suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
Ideal for general doweling and threaded rod applications
Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
Anchor Technical Notes
$ 18.19Features
APVL6 provides strong 90° reinforcement
Sleek, contemporary design
Premium corrosion resistance
Versatile installation
Heavy-duty construction
$ 6.09Features:
Designed to help resist download forces
The unique two-level embossment provides added stiffness to the top flange
Quick installation
Nominal joist size: 2×6
Made from 14-gauge steel
$ 4.69Features
The Avant Collection features straight edges and chamfered corners for a clean, timeless design
Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
The APVA4 is designed for use with 4x or larger lumber
$ 1.99Features
APVA21 provides strong 90° support
Decorative design
Durable construction
Corrosion Resistant
Simpson Strong-Tie SSP SSP 18-Gauge
Galvanized Single Stud Plate 
