“ML009G 40V max XGT Cordless Work Light, Light Only” has been added to your cart.
View cart
Showing 81–101 of 101 resultsSorted by popularity
$ 287.50Features
Makita-built motor delivers 1,100 lbs. of dispensing force to dispense the highest viscosity adhesives and sealants
5 setting speed dial optimizes flow rate from 0-66 IPM
Variable speed trigger allows user to match the speed to the application
360° rotatable cartridge holder fits 28-29 oz. cartridges
Drip-reduction feature automatically relieves pressure on the material when trigger is released to prevent unintentional dispensing
$ 400.99Features
Drives a range of 18 gauge brad nails from 5/8″ to 2″; magazine capacity up to 100 nails
Drives up to 1,660 finish nails using a 5.0Ah 18V LXT® Battery (battery not included)*
2-mode selector switch for control of nailing operation
“Tool-less” depth adjustment for precise flush and countersink finish
Anti-dry fire mechanism engineered to prevent driving blanks and damage to work surface
$ 235.99Features
Brushless motor delivers 0-2,500 RPM with increased torque to handle high demand fastening applications
Push Drive™ Technology – in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power
Depth adjustable nose piece delivers consistent screw fastening performance
The BL Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
$ 264.99Features
Quick-Shift Mode™ uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
Brushless motor delivers 3,600 Max RPM and 1,600 in.lbs. of Max Torque
4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications
Additional one-touch 4-speed power selector button under the chuck for added convenience
Assist Mode (A-mode) feature helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins
$ 854.99Features
X2 LXT® technology delivers up to 140 1/2″ x 2-3/8″ holes per charge using two 18V LXT® 5.0Ah batteries
Powerful BL™ Brushless motor delivers 0-980 RPM, 0-5,000 BPM and 2.3 ft.lbs. of impact energy to handle the most demanding applications
Dust extraction capability with optional OSHA Table 1 compliant On-Board Dust Extractor Attachment
Anti-Vibration Technology (AVT®) is an active internal counterbalance system which is engineered to reduce vibration for increased comfort
Vibration-absorbing back handle and side handle further reduce vibration and increase comfort on the job
$ 435.99Features
Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
Compact and ergonomic design at only 12-7/8″ long
Weighs only 7.2 lbs. with battery (battery not included) for reduced operator fatigue
Variable speed trigger enables user to match the speed to application for greater versatility
$ 228.99Features
Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM
3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
Faster drilling with synchronized RPM and BPM
Job site tested shock absorbent handle protects the battery housing for extra durability
$ 502.99Features
Powered by two LXT batteries; X2 LXT technology delivers more power, speed and run time without the hassles of a cord
Makita-built electronically controlled brushless motor delivers 5,100 RPM for maximum performance and 50% longer run time per charge
The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life
Automatic Speed Change™ technology adjusts cutting speed and torque during cut for optimum performance
X2 LXT technology delivers up to 558 crosscuts per charge in 2×4 SPF lumber and up to 291 crosscuts per charge in 2×10 SPF lumber using the two 5.0Ah batteries
XSR01PT Tech sheet
$ 435.99Features
3-mode operation: delivers 10,000 lumens on High, 4,000 lumens on medium, and 2,000 lumens on Low
Up to 2.4 hours of continuous illumination with two 4.0Ah 40V max XGT® batteries on high (batteries and charger not included)
Up to 14 hours of continuous illumination with two 4.0Ah 40V max XGT® batteries on low (batteries and charger not included)
Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
L.E.D. lights effectively illuminate work area without the high heat of halogens
$ 271.99Features
3-mode operation: delivers 3,600 lumens on High, 1,800 lumens on Medium, and 900 lumens on Low
Up to 3.5 hours of continuous illumination with a 4.0Ah 40V max XGT® battery on high (battery and charger not included)
Up to 15 hours of continuous illumination with a 4.0Ah 40V max XGT® battery on low (battery and charger not included)
Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
L.E.D. lights effectively illuminate work area without the high heat of halogens
$ 139.71Features
4-mode operation: delivering 600 lumens on Spot, 1,000 lumens on Flood, 1,250 lumens on Spot/Flood, and Strobe mode
Illuminates up to 700 yards in Spot and Spot/Flood mode
Up to 7 hours of continuous illumination in Spot mode with 5.0Ah 18V LXT® battery (battery not included)
90º pivoting head for user convenience
Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
$ 621.99Features
Self-righting design keeps work light in upright position
3-mode operation: delivers 5,500 lumens on High, 3,000 lumens on medium, and 1,500 lumens on Low
3 illumination range modes: 360º, left 180º, and right 180º
Battery or corded operation; compatible with 18V LXT® batteries (batteries and charger not included)
Up to 3.3 hours of continuous illumination with two 5.0Ah 18V LXT® battery on high (batteries and charger not included)
$ 496.99Features
Three adjustable light heads rotate 180° vertically
Extends to an overall height of 7-1/4 ft. with a foldable design for quick setup and takedown
3-mode operation; delivers 3,000 lumens on High, 1,700 lumens on Medium, and 900 lumens on Low
Daylight white L.E.D.s produce a clearer light
L.E.D. lights effectively illuminate work area without the high heat of halogens
$ 433.99Features
Extends to an overall height of 7-1/4 ft. with a foldable design for quick setup and takedown
Adjustable head rotates 220° vertically and pivots 230° horizontally
3-mode operation; delivers 3,000 lumens on High, 1,700 lumens on Medium, and 900 lumens on Low
Daylight white L.E.D.s produce a clearer light
L.E.D. lights effectively illuminate work area without the high heat of halogens
$ 363.99Features
3-mode operation: delivers 10,000 lumens on High, 4,000 lumens on medium, and 2,000 lumens on Low
Up to 1.7 hours of continuous illumination with two 6.0Ah 18V LXT® battery on high (batteries and charger not included)
Up to 8.5 hours of continuous illumination with two 6.0Ah 18V LXT® battery on low (batteries and charger not included)
Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
L.E.D. lights effectively illuminate work area without the high heat of halogens
$ 250.99Features
3-mode operation: delivers 3,000 lumens on High, 1,500 lumens on medium, and 750 lumens on Low
Up to 3 hours of continuous illumination with a 6.0Ah 18V LXT® battery on high (battery and charger not included)
Up to 13 hours of continuous illumination with a 6.0Ah 18V LXT® battery on low (battery and charger not included)
Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
L.E.D. lights effectively illuminate work area without the high heat of halogens
$ 381.99Features
BL Brushless Motor delivers 740 ft.lbs. of Fastening Torque and 1,180 ft.lbs. of Nut-Busting Torque
3-speed power selection switch (0-900/ 0-1,000/ 0-1,800 RPM & 0-1,800/ 0-2,000/ 0-2,200 IPM) provides precise fastening control for a wide range of applications
The BL™ Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
Weighs only 7.9 lbs. with battery (battery not included) for reduced operator fatigue
$ 210.99Features
Makita XDT131 features a built brushless motor that delivers 1,500 in.lbs. of Max Torque
Variable speed (0-3,400 RPM & 0-3,600 IPM) for a wide range of fastening applications
Convenient 1/4″ hex chuck for quick bit changes
Built-in dual L.E.D. lights illuminate the work area
3-year limited warranty on tool, battery and charger
$ 502.99Features
Powered by two LXT batteries; X2 LXT technology delivers more power, speed and run time without the hassles of a cord
Makita built electronically controlled BL™ Motor delivers 6,000 RPM for maximum performance and 50% longer run time per charge
X2 LXT® technology delivers up to 610 crosscuts per charge in 2×4 SPF lumber and up to 320 crosscuts per charge in 2×10 SPF lumber using two 5.0Ah batteries
Large 2-5/8” cutting capacity at 90°
Electric brake for maximum productivity
0°- 56° bevel capacity with positive stops at 22.5°, 45°, and 56°
This item has been DISCONTINUED.
$ 798.99Features
Makita-built motor delivers 12,500 VPM to help increase strength of concrete
Dual directional switch to conveniently hold the tool in either horizontal or vertical positions
Compact and ergonomic design at only 105-1/2″ long
Protective cover helps prevent battery contamination
18V LXT® Lithium-Ion 5.0 Ah battery BL1850B reaches a full charge in 45 minutes or less
ML009G 40V max XGT Cordless Work Light, Light Only 
