$282.50Original price was: $282.50.$271.20Current price is: $271.20.
Features
Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
Provides up to 65% more run time per charge compared to BL1830
Reaches full charge in 45 minutes or less
Compatible only with STAR Protection tools, indicated by the Star symbol™ and/or yellow battery receiver under the tool
Battery delivers consistent power and run time in extreme temperatures, even in winter (-4°F/-20°C)
Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating
Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
Battery resists self-discharge and remains ready for use even after long periods of storage
Makita XLC10R1W brushless motor runs cooler and more efficiently; delivers up to 42 CFM
Push button 4-speed power selection (max/high/normal/quiet) for efficient operation
Up to 27 minutes of continuous use in quiet mode from a single fully charged 18V Compact 2.0Ah LXT® battery; optional 5.0Ah battery delivers up to 69 minutes of continuous use
Accepts disposable paper or reusable cloth dust bags for added convenience
The XT296ST features Makitas-built brushless motor which is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-1,800 RPM)(0-8,250 & 0-27,000 BPM) with brushless motor delivers 970 in.lbs. of Max Torque for up to 70% more power*; weighs only 4.9 lbs. with battery for a wide range of drilling, fastening and hammer drilling applications
The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life
The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
Optimization of motor specifications and gear ratios improves efficiency and allows the Hammer Driver-Drill to drill into 2x dimensional lumbers in high speed
$442.99Original price was: $442.99.$425.27Current price is: $425.27.
Features
XPH16T features a variable 2-speed design (0-550 & 0-1,800 RPM) (0-8,250 & 0-27,000 BPM) covers a wide range of drilling, driving and hammer applications
Makita-built brushless motor delivers 970 in.lbs. of Max Torque for up to 70% more power*
Efficient brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
The brushless motor eliminates carbon brushes, enabling the brushless motor to run cooler and more efficiently for longer life
The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
Variable 2-speed 1/2″ Hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque and weighs only 4.0 lbs. with battery
6-1/2″ Circular Saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. with battery
Reciprocating Saw provides 0-2,800 SPM with “tool-less” blade changes and weighs only 8.3 lbs. with battery
Variable speed Impact Driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 in.lbs. of Max Torque and weighs only 2.8 lbs. with battery
1/2″ Impact Wrench delivers 170 ft.lbs. of Max Torque and weighs only 3.8 lbs. with battery
Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL™ Motor delivers 1,250 in.lbs. of Max Torque; weighs only 6.0 lbs. with battery for a wide range of drilling, fastening and hammer drilling applications
Impact Driver features 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM) provides 1,550 in.lbs. of Max Torque; weighs only 3.3 lbs. with battery
Variable 2-speed Hammer Driver-Drill with Makita-built Brushless Motor delivers (0-550 & 0-2,100 RPM) and 1,250 in.lbs. of Max Torque; weights only 6.0 lbs. with battery
Impact Driver features 4-speed power selection (0-1,100 / 0-2,100 / 0-3,200 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,600 / 0-3,800 IPM) provides 1,600 in.lbs. of Max Torque; weighs only 3.4 lbs. with battery
7-1/4″ Circular Saw delivers 5,100 RPM for maximum performance and features a large 2-9/16” cutting capacity at 90°; weighs only 12.4 lbs. with batteries
Recipro Saw delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute and a 1-1/4″ stroke length for faster cutting; weighs only 8.2 lbs. with battery
Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
Brushless motor eliminates carbon brushes, enabling the brushless motor to run cooler and more efficiently for longer life
The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL™ Motor delivers 1,250 in.lbs. of Max Torque; weighs only 6.0 lbs. with battery for a wide range of drilling, fastening and hammer drilling applications
Impact Driver features 3-speed power selection (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM) provides 1,550 in.lbs. of Max Torque; weighs only 3.3 lbs. with battery
7-1/4″ Circular Saw delivers 5,100 RPM for maximum performance and features a large 2-9/16” cutting capacity at 90°; weighs only 12.4 lbs. with batteries
Efficient Makita-built brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditions
Driver-Drill weighs only 3.1 lbs. with battery for reduced operator fatigue
Compact and ergonomic design at only 6-1/2″ long
Mechanical variable 2-speed transmission (0-500 & 0-1,700 RPM) (0-7,500 & 0-25,500 BPM) for a wide range of drilling, fastening and hammer drilling applications
Makita-built Brushless Motor delivers 350 in.lbs. of Peak Torque
Engineered with a metal jampot design for increased durability
Provides spark-free cuts that are clean and burr-free for easy hand-threading of fastener or nut
Up to 1,300 cuts of 3/8” mild steel threaded rod and 1,200 cuts of 3/8” stainless steel threaded rod with one 18V LXT 5.0Ah battery (battery not included)
Ideal for overhead cutting of installed threaded rod including 1/4″ and 3/8″ coarse thread diameter sizes
Ergonomically designed handle provides a more comfortable hand position for increased comfort and less fatigue
Compact design at only 7-7/8″ long and weighs only 7 lbs. with battery (battery not included)
XT1501 18V LXT Lithium‑Ion Cordless 15‑Pc. Combo Kit [3.0Ah] 
