Showing 281–320 of 5467 resultsSorted by popularity
-
Standard Shipping
$69.99Features:
- Seamless construction offers increased comfort and breathability
- PolyKor? blended shell is lightweight and provides excellent dexterity, tactile sensitivity, and cut resistance
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
- Knit Wrist helps prevent dirt and debris from entering the glove
- Hi-Vis coloring makes this product very easy to see
- Color coded hems for easy size identification
- 100% Silicone Free
- Washable, resistant to chemicals, water, and ultraviolet light
-
Special Order Shipping
$223.99Features
- Up to 2X less weight than heavier hoses
- Highly flexible and less kinks for easy rolling
- Engineered to be more durable than vinyl hoses for longer life and improved performance
- Includes fittings for added value and convenience
- All weather resistant
- For use with high pressure compressors and nailers
-
Standard Shipping
$87.26Features
- Tested in accordance with ACI 355.2 and AC193
- Qualified for static, wind and seismic loading conditions
- Available in 1/2″ and 5/8″ diameters
- Standard fractional sizes — the hole size matches the anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- For added convenience, a 1/2″ socket adapter and (2) T-drive bits are included in each box
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- Washer head allows screw anchor applications incompatible with a hex head
-
Standard Shipping
$4.95Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Free Shipping
$629.99Features
- Dewalt DCS578X2 features Up to 47% more power vs the DCS575**
- Uses a 7-1/4 in. circular saw blade and features a maximum cut depth of 2-9/16 in. at a 90° bevel.
- Maximum bevel capacity of 57° with bevel stops at 22.5° and 45°
- Electric brake stops the blade after the trigger is released
- Integrated LED for increased visibility and cut accuracy
- Integrated rafter hook for quick and easy storage
-
Special Order Shipping
$1,439.10Features
- Max AKHL1260E features a Dc-Brushless Motor With Inverter Circuit
- Automatic system adjustment for maximum performance
- Quite mode
- LED control panel
- User friendly diagnostic system
- Four air outlets
-
Standard Shipping
$47.60Features:
- Made of strong lightweight aluminum
- Will not chip, crack or break, easy turn handle, fits any standard belt
- Made in the USA
-
Special Order Shipping
$17.96MASONftS LINE, BRD, 500ft, FL YELLOW
-
Special Order Shipping
$8.29
-
Special Order Shipping
$38.94
-
Special Order Shipping
$481.27
-
Special Order Shipping
$49.57PLASTIC STEP TOOL COVE 3/4R
-
Special Order Shipping
$699.99Features:
- 2 nails per second (16D / 8D / 6D)
- 900 nails per charge (w/ 36V 2.5Ah MultiVolt battery)
- Pneumatic-like feel with no gas, no hose, no compressor and zero ramp-up time
- Compatible with Duplex fasteners: 50214-6D: 2-1/4 x .131, 50234-8D: 2-3/4 x .131, 50312-16D: 3-1/2 x .131
-
Free Shipping
$255.02Features:
-
$0.00ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
-
Standard Shipping
$5.17Features:
- Hardened cutting edge for long and durable cutting life
- Deep-seated gullets for easy chip removal and fast cutting
- Bi-Directional tooth design for fast and smooth cutting in both directions
Minimum order quantity: 5
Order in multiples of: 5
-
Quote Request - Shipping Calculated Later
$0.00ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- Use to add strength or reinforce the tensile strength of concrete slabs
- Made from steel wire
- Welded together in a square grid pattern
-
Quote Request - Shipping Calculated Later
$0.00ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 20′ sticks
- Available for fabrication
-
Free Shipping
$999.99Features
- DCLE34035D1 features long runtime – work long days with 9 hours of runtime per charge
- Remote-controlled operation – help maximize productivity on the job with remote control fine-tune adjustments horizontally up to ~174 and vertically up to ~3. 5 in
- Long-range visibility – take on large areas with up to 260 ft. Visible range and up to 330 ft
- Quick-head adjustment – quickly make adjustments to the laser head
- Drop alert detection – get alerted to freefall drops and perform recalibration when necessary
-
Standard Shipping
$5.75Features
- Touchscreen Capability Keeps You Working
- ANSI Cut Level A2
- 8 Gauge High Visibility HPPE Shell
- Seamless Knit For Comfort
- Reinforced Thumb Saddle
-
Standard Shipping
$10.89Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Install with Outdoor Accents structural screws and hex-head washer for decorative look (sold separately)
-
Standard Shipping
$48.89Features
- Gable plates are easily installed with Outdoor Accents structural screws and hex-head washers (fasteners sold separately)
-
Standard Shipping
$101.59Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$52.29Features
- Wraps around the MPBZ moment post base as well as the CBSQ, ABUZ, ABWZ and ABAZ post bases (only with screw and nail application; will not work over bolts)
- Four-piece cover easily screws together outside the post base (screws included)
- Covers the post base with no need to drill into the post
-
Standard Shipping
$15.19Features
- Combined with the Outdoor Accents structural wood screw (SDWSDBB), it provides a structural load-rated solution
- Easy to install
- Code listed in IAPMO-UES ER-192
-
Standard Shipping
$3.39APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw.
-
Standard Shipping
$18.89Features
- Use with Outdoor Accents decorative hardware and STN22 hex-head washer for an appealing look
- Use Outdoor Accents structural screw without the washer as a wood-to-wood fastener
- Deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
- Patented SawTooth® point (3 1/2″ and 5 1/2″ screws only) ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications; Type-17 point on 2″ screw ensures fast starts
- Black double-barrier coating offers premium look while providing a medium level of corrosion
-
Standard Shipping
$101.59Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$33.69Features:
- Air-infused PVC palm coat for excellent wet and dry grip
- Economical alternative to nitrile palm coats for general light duty applications, ideal for work with adhesives
- Seamless liner provides excellent tactile sensitivity
- Knit Wrist helps prevent dirt and debris from entering the glove
- Good resistance to petroleum products
- Abrasion-resistant
-
Standard Shipping
$14.59Features:
- Natural cotton canvas keeps hands cool and protected
- Knit Wrist helps prevent dirt and debris from entering the glove
- Clute cut provides a roomy fit
- Straight thumb increases comfort in closed-fisted work
-
SALE 14% OFF
Free Shipping
$232.50 Original price was: $232.50.$199.99Current price is: $199.99.Features
- Makita XWT15Z features 240 ft.lbs. of Fastening Torque and 430 ft.lbs. of Nut-Busting Torque
- 3 forward and 3 reverse Auto-Stop modes
- 4-speed power selection
- Weighs only 4.0 lbs. with battery
- Tool Only
-
Standard Shipping
$37.17Features
- Taller 13mm segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- For cutting concrete, block, brick, pavers, and roof tiles
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting diamond blade
- Made with high quality diamonds
- For smoother and finer cuts in masonry products
- For use with angle grinders or masonry saws
-
Special Order Shipping
$116.10Features
- Tough, excellent strength of maximum working pressure 500 PSI
- Rubber/PVC blend construction
- Very flexible even in sub-zero temperatures
- 100-Feet x 3/8-Inch
- Solid brass connectors never corrode and give a better seal
- Abrasion-resistant outer cover
-
Free Shipping
$1,129.00Features
- Safer than conventional concrete pinn
- Drives .307″ head pins into concrete or steel with 2,231 inch lbs. driving force.
- Only 6.4lbs-this lightweight tool has less recoil than P.A.T tools.
- Self-cleaning filter for reliable operations
-
Standard Shipping
$39.99Features
- Rock carbide tip for longer bit life
- Elongated four flute helix for faster material removal
- Increased steel prevents breakage
- For use with electric or cordless rotary hammers
-
Free Shipping
$468.99Features
- Exposed nail tip places fastener point directly into connector holes for a fast and precise application
- In-line magazine offers balance for maneuverability
- Adjustable rafter hook allows user to hang tool on rafters and joists
- Exclusive nail management feature helps to prevent jamming (patent pending)
- Drives 1-1/2″ and 2-1/2″ STRAPSHOT™ fasteners as well as other paper tape collated metal connector nails
-
Special Order Shipping
$22.896 3/4 X 5/8 TUCK POINTER – DURACORK HANDLE
-
Special Order Shipping
$22.896 3/4 X 5/16 TUCK POINTER – DURACORK HANDLE
-
Special Order Shipping
$22.896 1/2 X 3/16 TUCK POINTER – DURACORK HANDLE
-
Special Order Shipping
$44.37
