Showing 2441–2480 of 5211 results
-
Standard Shipping
$34.79
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$79.38
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$114.28
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
Standard Shipping
$97.23
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$188.31
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$48.86
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
$68.15
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Free Shipping
$288.62
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Standard Shipping
$73.54
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$62.46
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$39.00
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$72.15
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$155.69
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Free Shipping
$244.62
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Free Shipping
$266.92
Features
- THDSS stainless-steel screw anchor available in 1/4″, 5/8″ and 3/4″ diameters, in addition to the 3/8″ and 1/2″ sizes
- Ideal for exterior or corrosive environments
- Less carbon steel, less expansion
- Installs with an impact wrench or by hand tool
- Tested in accordance with ACI355.2, AC193 and AC106
-
Standard Shipping
$1.45
Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested, load rated and code compliant
-
Standard Shipping
$2.74
Features
- Forms part of a continuous load path to resist wind and seismic forces
- The H10A-2 model holds a double-ply member and is approved for installation with the Strong-Drive® SD Connector screw
- The H10AR model is designed for rough lumber sizes
-
Standard Shipping
$1.19
Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested, load rated and code compliant
-
Standard Shipping
$161.69
Features
- Certified welds for confidence in strength and loading
- Uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements to ensure optimal performance
- Diamond holes to provide temporary fastening
-
Standard Shipping
$139.08
Features:
- Can be used where quick-to-install posts are needed, including fencing and mailbox applications
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive SDS Connector screw
-
Standard Shipping
$24.99
Features
- Allows easy installation of 4×4 wood posts on existing concrete
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive® SDS Connector screw
-
Standard Shipping
$15.99
Features
- Allows easy repair of rotted or damaged wood posts installed in concrete or dirt
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive® SD Connector screw
- Reinforces weakened wood posts without having to replace the post or the concrete
-
Standard Shipping
$125.99
Features
- Bit extracts dust while drilling for less dust, fast holes and fast adhesive anchor installation
- Y-cutter carbide design for exact positioning, perfect starting & maximum durability
- Connects directly to DeWalt’s airlock system forming a secure, locking connection between bit and dust extractor
- Part of DEWALT’s complete cordless anchoring solution
-
Standard Shipping
$135.89
Features
- Bit extracts dust while drilling for less dust, fast holes and fast adhesive anchor installation
- Y-cutter carbide design for exact positioning, perfect starting & maximum durability
- Connects directly to DeWalt’s airlock system forming a secure, locking connection between bit and dust extractor
- Part of DEWALT’s complete cordless anchoring solution
-
Standard Shipping
$39.00
Features
- Impressive self retracting feature
- Combines features of long tape with convince of spring retracting hand tape
- 11 Ft. blade standout
- Cushion grip is slip resistant
- 1-1/4 in wide blade for easy readability
-
Standard Shipping
$139.00
Features
- Cordless angle grinder delivers 8,000-RPM for high-power cutting and grinding applications
- Quick-change™ wheel release allows for tool free wheel changes without the need for a wrench
- Tool-free guard allows for quick, easy guard adjustments/positioning
- 2-finger trigger switch with lock-off button for convenient activation and easier gripping
- 2-position side handle provides greater control, comfort and versatility when in use
- 20-volt rechargeable battery required (battery and charger sold separately)
- 2-position side handle offers greater control, comfort and versatility
-
Standard Shipping
$99.00
Features
- 360-Degree Handle For Multiple Orientation Use
- Powerful Brightness at 2,000-Lumen Output
- Natural Daylight Hue
- IP54 Rated – Water and Dust Ingress Protection
- Compact and lightweight at only 3-lbs. (tool only)
- Tripod Mountable – 5/8-in-11 and 1/4-in-20
-
Free Shipping
$551.99
Features
- For comfortable use when working in tight spaces with compact and lightweight design
- LED work light
- Helps Prevent Overtightening and Fastener run off with Precision Wrench control
- 4 speed settings and a variable speed trigger
- 600 ft-lbs of max fastening torque and 800 ft-lbs of max breakaway torque
-
Free Shipping
$406.00
Features
- DEWALT built brushless motor and XR Li-ion batteries deliver more run time and capacity over standard units
- 3-speed settings for optimized application versatility
- Precision drive in speed 1 for precision applications and added control
- 3 LED lights with 20 second delay after trigger release, provide visibility without shadows
- 1-handed loading 1/4-in hex chuck with easy grip sleeve, accepts 1-in bit tips
- Compact and lightweight design to fit into tight areas (6 mm shorter than the previous DCF886)
- Includes 1 DCF887 20-volt MAX XR 1/4-in 3-speed impact driver, two 4.0-Ah 20-volt MAX XR batteries, 1 fast charger, 1 belt hook
-
Free Shipping
$379.00
Features
- Centered handle position provides superior balance and ergonomics and allows for more accurate cuts and less user fatigue
- LED work light with 20 second delay illuminates dark work surfaces for accurate cutting
- Integrated hang hook allows user to hang the saw without damaging the front handle or base
- Blade tracking adjustment increases blade life by providing better blade tracking
- Tool-free blade changing lever loosens blade tension to allow for blade change
- Dual-bearing blade guide rollers provides increased durability in the blade support system
- Ergonomic soft grip back handle provides comfort and flexibility
-
Free Shipping
$559.00
Features
- OSHA Table 1 Compliant when paired with DWH303DH On Board Extractor
- Brushless motor and durable German-engineered mechanism for efficient performance and runtime.
- Rotating Dial to set tool to a specific application mode – Drill, Hammer Drill, or Chip.
- SHOCKS™- Active Vibration Control significantly reduces vibration and increases user comfort and productivity, A Perform and Protect Feature
- 2.1 Joules impact energy provides corded power without the cord
-
Free Shipping
$249.00
Features
- UP TO 50% MORE POWER WITH FLEXVOLT® BATTERIES
- FAST CUTTING: 1-1/8 in. stroke length delivers a fast cutting speed
- EASY BLADE CHANGES: Keyless lever-action blade clamp for quick and easy blade changes
- BLADE CONTROL: Variable-speed trigger with 0-3,000 spm provides blade control
- INCREASED VISIBILITY: Bright LED for better visibility in low-light work areas
- Tool Connect™ Chip Ready: Chip pocket accepts Tool Connect™ Chip DCE042 and connects with Tool Connect™ Site Manager app for easy asset management on the jobsite. (DCE042 sold separately)
- COMPATIBLE with all DEWALT® 20V MAX* and FLEXVOLT® Batteries
-
Free Shipping
$53.99
Features
- Bull Point (Moil Point) used for chipping and breaking applications in a variety of masonry products
- Slotting chisel is used for removing grout from brick and for controlled breaking applications
- Scaling chisel (wide chisel) is used for removing tile, concrete splatter, and other excess material
- Manufactured by DEWALT
-
Standard Shipping
$294.69
Features
- Premium XR lithium ion pack provides up to 60% more capacity than standard 20V MAX battery pack (DCB200)
- 3-LED fuel gauge allows immediate feedback on state of charge
- No memory and virtually no self-discharge for maximum productivity and less downtime
- Lightweight at 1.4-lbs and compatible with entire line of 20V MAX tools
- Maximum initial battery voltage (measured without a workload) is 20 volts – nominal voltage is 18
-
Standard Shipping
$17.99
Features
- Cold chisel (narrow chisel) is used for channeling or breaking in a straight line
- For use with all brands of SDS max demolition hammers and rotary hammers with chipping function
- Fully hardened steel body delivers increased life and durability
-
Standard Shipping
$49.99
Features
- High diamond concentration for long life and aggressive material removal
- Large grinding segments with heat treated steel bodies which provides increases durability and wheel life
- Dry grinding of concrete and other masonry materials
- Smoothing of uneven surfaces
-
Standard Shipping
$10.99
Features
- Segmented rim blades are laser-welded with heat-treated steel bodies
- These blades ideal for tough masonry applications
- Can be used wet or dry
-
Standard Shipping
$2.09
Features
- More Cuts. Fewer Wheels.TM
- 50% Longer Life, Replace less often with Temper Point grains that are tougher and razor sharp. Better adhesion between the coated grains and resin creates a longer lasting cutting edge that wears
- Extremely Versatile: Efficiently cut a wide range of metals including carbon steel, stainless and nickel-based alloys.
- Aggressive Cutting Action: Make fast cuts with a thin wheel design and high-grain concentration.
- Durable By DesignTM: Built with two sheets of fiberglass for wheel strength. Designed to reduce wheel breakage.
-
Standard Shipping
$3.79
Features
- Premium abrasive cloth provides up to 15 X longer life than fiber resin metal sanding discs
- Type 29 fiberglass backing provides grinding angle of 20-25 degrees
- Abrasive Material: Zirconia
-
Free Shipping
$495.00
Features
- The DCD999 Hammer Drill gets up to 42% more power** when paired with FLEXVOLT® batteries
- Both tools compatible with all DEWALT® 20V MAX* and FLEXVOLT® Batteries
- 20X BRIGHTER LED: The DCD999 3-mode LED provides lighting in dark or confined spaces up to 20x brighter than the DEWALT DCD985
- EXTENDED WORK TIME WITH LED: The DCD999 features an LED spotlight mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces
- VERSATILITY: The DCF887 has application versatility with 3-speed settings
- ADDED CONTROL: The DCF887 helps prevent over-tightening fasteners with added control from Precision Drive™ in speed 1 setting
- VISIBILITY: The DCF887 creates visibility without shadows from 3 LEDs with a 20-second delay after trigger is released
- DCD999 is Tool Connect™ Chip Ready: Chip pocket accepts Tool Connect™ Chip DCE042 and connects with Tool Connect™ Site Manager app for easy asset management on the jobsite. (DCE042 sold separately)
