Showing 201–240 of 5407 results
-
Special Order Shipping
$14.24
-
Special Order Shipping
$99.47
-
Standard Shipping
$5.53
Features:
- Chamfered top designed to prevent mushrooming during installation
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
- Tested per ACI355.2 and AC193
-
Standard Shipping
$3.00
Features:
- Replaces additional framing and toe-nailing
- Suitable for most installations on nominal 2×10 or 2×12 header/rim board
- May be installed flush with the top of the carrying member or lower on the face
- Interchangeable for left or right applications
- Made from 18-gauge steel
-
Free Shipping
$640.99
Features:
- Poly Coated Wire Resists Rust and Corrosion
- Use with epoxy coated rebar
- 19 Guage Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
$399.17
Features:
-
Free Shipping
$224.99
Features:
- Variable speed control dial to match the speed to the application
- Smooth rack-and-pinion fine depth adjustment system for more precise settings
- Slim and ergonomically designed body with rubberized grip
- Soft start feature for smoother start-ups and better accuracy
- Electronic speed control maintains constant speed under load
-
Standard Shipping
$47.69
Features:
- Nitrile MicroFoam coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance
- Seamless one-piece nylon shell offers increased comfort, finger dexterity and breathability
- Knit Wrist helps prevent dirt and debris from entering the glove
- Silicone and Latex free
- Surface of the glove designed to “channel” oil away to give a better grip
- Light coating gives improved flexibility and dexterity
- Minimal strikethrough reduces irritation and increases comfort levels
- Designed to produce minimal lint and dust
- This glove has been laundered prior to final packaging making it clean and safe for use
- The Oeko-Tex? Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin
- This style is also available tri-folded and shrink-wrapped for carefree dispensing through vending machines (34-800V)
-
Special Order Shipping
$110.99
Features:
- Has a .472 inch impregnated diamond segment for longer life, smoother finish and faster cutting
- Alternating turbo segment for cut speed, and plain segment for life
- Ventilated steel center with cooling holes to reduce heat when cutting
- Laser cut dual arbor for consistent fit on high-speed, masonry, and walk-behind saws
-
SALEÂ 20% OFF
Free Shipping
$219.99 Original price was: $219.99.$176.35Current price is: $176.35.
Features
- Powerful 7 amp motor
- Torque limiting clutch engineered to prevent gear damage
- Variable speed trigger
- 40 bit angle settings
- One-touch sliding chuck for quick bit changes
-
Standard Shipping
$12.79
Features
- ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
-
Standard Shipping
$48.19
APHH heavy hangers connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents® structural wood screw and hex-head washer, and to the header with the Strong-Drive® SDS…
-
Standard Shipping
$2.69
Features
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
-
Standard Shipping
$24.49
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$38.59
Features:
- Seamless construction offers increased comfort and breathability
- PolyKor? blended shell is lightweight and provides excellent dexterity, tactile sensitivity, and cut resistance
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
- Knit Wrist helps prevent dirt and debris from entering the glove
- Color coded hems for easy size identification
- Washable, resistant to chemicals, water, and ultraviolet light
-
Free Shipping
$172.60
Features:
- Made of carbon steel wire
- Tangle-free unwinding
- Full case count – 20 rolls
-
Special Order Shipping
$62.81
9 1/2in BRICK TROWEL PHILADELPHIA PATTERN – DURACORK HANDLE
-
Special Order Shipping
$65.27
BRICK TROWEL
Minimum order quantity: 2
Order in multiples of: 2
-
Special Order Shipping
$59.74
SCOOP,# 2,EASTERN,HB,48in ASH H
-
Special Order Shipping
$9.96
-
Special Order Shipping
$9.04
-
Special Order Shipping
$59.01
-
Special Order Shipping
$33.94
POWER TROWEL BLADE-8 X 16 COMB
Minimum order quantity: 4
Order in multiples of: 4
-
Special Order Shipping
$33.47
-
Special Order Shipping
$35.64
BULL FLT GROOVER ATTACH, 3/4in
-
Standard Shipping
$39.90
Features
- PFM1411100 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
Standard Shipping
$71.20
Features
- Radians RWG533 18 gauge green High Performance Polyethylene (HPPE) provides cut resistance
- Black sandy foam nitrile palm coating provides protection from abrasion in wet or dry conditions
- Seamless cuff design provides a comfortable fit
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture ( 4 3 4 1)
- ANSI Cut Level A2, EN388 Cut Level 3
-
Standard Shipping
$101.59
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$317.99
Features
- UP TO 77% MORE POWER** when paired with FLEXVOLT® batteries
- FASTER CUTTING: Powerful brushless motor delivers 5,500 RPM for faster cutting
- Maximum depth of cut of 2-9/16 in. at a 90°
- Maximum depth of cut of 2 in. at a 45°
- ELECTRIC BRAKE stops the blade after the trigger is released
- INCREASED VISIBILITY: Bright LED increases visibility and cut accuracy
- EASY STORAGE: Integrated rafter hook for quick and easy storage
- MINIMIZES DUST: Optional dust port allows connection to a dust extractor to minimize dust during cutting (DWE575DC Dust Port sold separately).
-
Free Shipping
$240.99
Features
- Makita MP001GZ01 powerful Cordless High-Pressure Inflator delivers up to 160 PSI
- High visibility pressure gauge display with back light
- Auto-stop function automatically stops inflation
- Three speed settings (High/Medium/Low)
- 25-1/2in hose length
-
Special Order Shipping
$7.69
-
Special Order Shipping
$7.72
MASONftS ACID BRUSH W/THREADED HOLE
-
Special Order Shipping
$9.34
THREADED HANDLE CLEVIS ADAPTER
-
Free Shipping
$403.37
Engineered to deliver enhanced safety measures and dependability, this pneumatic brad nailer from the SuperFinisher line adds the finishing touch to any doors, cabinets to securing delicate crown moldings finish jobs. The extremely lightweight NF255SF2/18 is built for an array of applications. Achieve the finishing touches that you want without the worry of damaging your…
-
Standard Shipping
$35.29
Features
- Complements the Outdoor Accents APVB decorative post base
- Designed for use with 4x, 6x, 8x and 10x nominal lumber
- Decorative side plates are sold in boxes of 2
-
Standard Shipping
$26.19
Features
- Use with Outdoor Accents decorative hardware and STN22 hex-head washer for an appealing look
- Use Outdoor Accents structural screw without the washer as a wood-to-wood fastener
- Deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
- Patented SawTooth® point (3 1/2″ and 5 1/2″ screws only) ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications; Type-17 point on 2″ screw ensures fast starts
- Black double-barrier coating offers premium look while providing a medium level of corrosion protection for many outdoor applications
-
Standard Shipping
$95.59
Features
- Gable plates are easily installed with Outdoor Accents structural screws and hex-head washers (fasteners sold separately)
-
Standard Shipping
$22.39
Features:
- Discontinued-See 87810, 87015
- Synthetic leather palm enhances grip in dry and light oil applications while providing dexterity
- Silicone palm with honecomb pattern repels liquids for enhanced grip and abrasion
- Thermo Plastic Rubber (TPR) molded finger, thumb and back hand guards for maximum protection
- Hi-Vis coloring makes this product very easy to see
- Reinforced Kevlar thumb saddle for durability
- Neoprene slip on cuff
- Launderable for extended life and to reduce replacement costs
-
Standard Shipping
$35.59
Features:
- Seamless construction offers increased comfort and breathability
- Polykor blended shell is lightweight and provides excellent dexterity, tactile sensitivity and cut resistance
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
- Knit Wrist helps prevent dirt and debris from entering the glove
- Color coded hems for easy size identification
- 100% Silicone Free
- Washable, resistant to chemicals, water, and ultraviolet light