SWOCTO72 Marshalltown swage octagon handle 1-3/4in X 72in CLEAR
Special Order Shipping
$36.22SWAGE OCTAGON HANDLE, 1-3/4in X 72in, CLEAR
Minimum order quantity: 6
Order in multiples of: 6
Showing 121–160 of 5467 resultsSorted by popularity
-
-
W.R. Meadows PERMINATOR Underslab Vapor Barrier
$0.00FEATURES/BENEFITS
- Available in 10 mil and 15 mil thicknesses, in 200′ (61 m) long rolls.
- Helps reduce the penetration of moisture and water vapor through the slab into the structure.
- Helps reduce fungus, mildew, and mold.
- Helps reduce radon gas from entering a structure.
- Resistant to methane gas.
- Tough enough to withstand normal construction jobsite conditions and traffic … will not crack, puncture, snag, split, or tear easily.
- Installs quickly and easily over tamped grade … no gravel, fill, or sand needed.
- 12′ (15 mil) and 15′ (10 mil) wide rolls require fewer seams in application.
- PERMINATOR prevents uncontrolled moisture from entering the slab allowing the slab to maintain the maximum slab moisture emission rate and relative humidity level as allowed by flooring manufacturer’s specifications.
- 10 or 15 mil thickness clearly marked on membrane for easy visual identification on jobsite.
- VOC content is 0 g/L.
- Made in America.
Select Options This product has multiple variants. The options may be chosen on the product page -
Max CP-W833W4SP 1-1/4x.133in PowerLite High Pressure Step Shank Concrete/ Steel Pin
Special Order Shipping
$141.75 -
Simpson Strong-Tie PA51 PA 51 in. 12-Gauge Galvanized Purlin Anchor
Standard Shipping
$21.83Features:
- Minimum concrete edge distance is 5 in.
- Minimum concrete block left-to-right edge distance is 20 in.
- Length: 51 in.
- For additional length, an MST strap can be attached using 1/2- bolts through existing holes
- Made from 12-gauge steel
-
RED700515 Marshalltown Broom KITCEMFINALU36in .008W
Special Order Shipping
$112.84BROOM KIT,CEMFIN,ALU,36inin.008W
-
Diablo DS1206CWS3 12″ Carbide Reciprocating Blade for Nail Embedded Wood 3 PACK
Standard Shipping
$33.50Features:
- Faster cuts with less vibration in nail-embedded wood
- High performance carbide for greater durability and cutting performance
- Enhanced carbide tip to blade connection for extreme impact resistance
- Unique plunge tip design that enables faster and easier plunging
- 1 in. oversized blade body for straighter cuts with less vibration
-
Simpson Strong-Tie HTS24 HTS 24 in. 14-Gauge Galvanized Heavy Twist Strap
Standard Shipping
$3.81Features:
- Available with the bend reversed
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Versatile with many lengths offered to fit the specific application
- Length: 24 in.
- Made from 14-gauge steel
-
Simpson Strong-Tie ET3G22-N 22-oz. Epoxy Adhesive Cartridge w/ Nozzle and Extension
Standard Shipping
$28.39Features
- Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
- Ideal for general doweling and threaded rod applications
- Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
-
Radians Granite Cap Style 4 Point Ratchet Hard Hat
Standard Shipping
$9.00Features
- Meets ANSI Z89.1 Type 1 Class G & E Standards
- Cap Style
- 4 Point Ratchet Suspension
- Pillowed Brow Pad
- Nylon Crown Strap Suspensions
Select Options This product has multiple variants. The options may be chosen on the product page -
Simpson Strong-Tie APVL6 Strap Tie
Standard Shipping
$18.19Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Install with Outdoor Accents structural screws and hex-head washer for decorative look (sold separately)
-
Ambi-dex 64-V77BPF Industrial Grade Disposable Vinyl Glove, Powder Free – 5 Mil [1 box]
Standard Shipping
$4.89Features:
- Great for tough jobs requiring disposable gloves with contrasting color to identify application
- Powder-Free for clean comfort and superior tactile sensitivity
- Ambidextrous for quick and easy donning
- Contains no natural rubber latex proteins
- Complies with FDA food handling requirements 21 CFR, Part 177
Minimum order quantity: 10Order in multiples of: 1Select Options This product has multiple variants. The options may be chosen on the product page -
B-69696 4‑1/2in Diamond Blade Turbo General Purpose
Standard Shipping
$11.60Features
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Dry or wet cutting for added versatility
- Carefully tensioned for less vibration and a superior user experience
- Made with high quality diamonds
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Strict quality control measures ensure superior performance
- For smoother and finer cuts in masonry products
-
SALE 5% OFF
Bostitch MCN150 STRAPSHOT Metal Connector Nailer 35deg 1 1/2in
Free Shipping
Original price was: $239.99.$229.00Current price is: $229.00.MCN150 Features
- Compact design fits between 12″ O.C. joists
- Exposed nail tip design fires in the hole for fast precise nailing
- 10.5 inch height
-
M7343ELG Marshalltown power trowel blade-8 X 18 finish GOLD
Special Order Shipping
$44.54POWER TROWEL BLADE-8 X 18 FINISH GOLD
Minimum order quantity: 4Order in multiples of: 4 -
M6094ELG Marshalltown power trowel blade-combination
Special Order Shipping
$44.59POWER TROWEL BLADE-COMBINATION
Minimum order quantity: 4Order in multiples of: 4 -
Simpson Strong-Tie LB26 LB Galvanized Top-Flange Joist Hanger for 2×6
Standard Shipping
$6.09Features:
- Designed to help resist download forces
- The unique two-level embossment provides added stiffness to the top flange
- Quick installation
- Nominal joist size: 2×6
- Made from 14-gauge steel
-
Diablo DS0408CF 4in Carbide Recip Blades for Thick Metal Cutting
Standard Shipping
$7.31Features:
- High performance carbide for greater durability and cutting performance in metals with a thickness from 3/16″ to 9/16″
- Enhanced carbide tip to blade connection for extreme impact resistance
- 1 in. oversized blade body for straighter cuts with less vibration
-
2′ x 6′ Lumber 16ft
Quote Request - Shipping Calculated Later
$0.00ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 16′
- 128 pieces per bundle
-
2′ x 12′ Lumber 16ft
Quote Request - Shipping Calculated Later
$0.00ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 16′
- 64 pieces per bundle
-
DEWALT DPG737 Glove in Glove Thermal Work Glove
Standard Shipping
$8.01Features
- 2-in-1 CWS Thermal Gripper Glove
- Moisture Wicking Outer Nylon Shell
- 3/4 Dipped Micro Foam Latex for Grip
- 100% Acrylic Thermal Lining
- Cold Weather Protection
Select Options This product has multiple variants. The options may be chosen on the product page -
Simpson Strong-Tie APVA4 90 deg Angle Outdoor Accents Avant Collection ZMAX, Black Powder-Coated for 4x
Standard Shipping
$4.69Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
- ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
- The APVA4 is designed for use with 4x or larger lumber
-
47A Marshalltown 5 1/2 X 1 7/8 Bullnose Pointing Trowel
Special Order Shipping
$21.41INSULATOR TROWEL
Minimum order quantity: 6Order in multiples of: 6 -
FT124SS Marshalltown Finishing Trowel – 12X4 – Stainless Steel Soft Grip
Special Order Shipping
$16.72FINISHING TROWEL – 12X4 – STAINLESS STEEL SOFT GRIP
Minimum order quantity: 6Order in multiples of: 6 -
[Pack of 100] DeWalt PFM1411020 1/4″ x 1-3/4″ Screw-Bolt+ Concrete Screw Anchor, Hex Washer Head, Zinc
Standard Shipping
$29.95Features
- PFM1411020 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
Simpson Strong-Tie APVA21 [90° Angle]
Standard Shipping
$1.99Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
-
M7346 Marshalltown extended life blue edger blade 6 X 14
Special Order Shipping
$28.09EXTENDED LIFE BLUE EDGER BLADE, 6 X 14
Minimum order quantity: 4Order in multiples of: 4 -
Form Release
$0.00ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
Select Options This product has multiple variants. The options may be chosen on the product page -
Simpson Strong-Tie APHH610 Concealed-Flange Heavy Joist Hanger
Standard Shipping
$48.19APHH heavy hangers connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents® structural wood screw and hex-head washer, and to the header with the Strong-Drive® SDS…
-
West Chester J1247RF PVC Dipped Glove with Jersey Liner and Rough Sandy Finish – 14″ Length [1 dozen]
Standard Shipping
$50.49- DISCONTINUED
-
Simpson Strong-Tie MPB88Z MPBZ ZMAX Galvanized Moment Post Base for 8×8 w/ SDS Screws
Free Shipping
$243.85Features:
- Tabs inside the MPBZ provide the code-required 1 in. post standoff to help prevent rot from standing water and ground moisture
- Stamped indicators and internal tabs identify the required concrete embedment depth
- Strategically placed holes simplify installation to allow template attachment
- Optional obround holes have been added for attaching trim material
- Additional holes at the embedment line allow standing water to exit and a point of visual inspection
-
Simpson Strong-Tie APVB88R Adjustable Post Base for 8×8 posts with Z-MAX Powder coating
Standard Shipping
$101.59Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Magnum Safe-ST Firebox 34” Portable Fire Extinguisher Stand & Safety Station
Standard Shipping
$129.99Features
- Durable polypropylene plastic
- Easy disassembly for efficient shipping and storage
- Mount First Aid Kits and other safety supplies directly to the Firebox to create a highly visible centralized location for dealing with emergencies on the jobsite
- Holding Area: 8-1/2″ x 8-1/2″ x 5-1/2″; Holds up to 30 LB extinguishers
- Measurement: 20″ x 20″ base, 34″ height
-
Simpson Strong-Tie APHH46 Outdoor Accents ZMAX, Black Heavy Joist Hanger for 4×6
Standard Shipping
$23.49Features
- Use all specified fasteners; see General Notes
- Use the Outdoor Accents structural wood screw (SDWS22312DBB) and hex-head washer (STN22) to connect to the joist
- Use the Strong-Drive SDS Heavy-Duty Connector screw (SDS25300) to connect to the header
- Fasteners sold separately
-
Radians RWG13 Nylon Shell Foam Nitrile Gripper Glove
Standard Shipping
$3.19Features
- Blended nylon/spandex shell
- Foam nitrile dipped palm
- Water resistant palm coating
- Elastic slip-on cuff
- Meets EN 388:2003 standards for abrasion, cuts, tear and puncture (4 1 3 1)
- Meets ANSI/ISEA 105 Abrasion Level 6.”
Select Options This product has multiple variants. The options may be chosen on the product page -
-
Max JC925A Battery Charger for MAX RB218, RB398, RB518, RB441T, RB611T, RB401T-E, PJRC160 tool batteries
Free Shipping
$229.32Max USA Battery Charger The JC925 (JC925A) is a charger for select rebar tying tool and rebar cutter/bender batteries from Max USA. This charger delivers a full charge in 65 minutes achieving 80% in just 50 minutes regardless of AH rating. Charges OEM lithium ion (Li-on) batteries for the following Max tools: RB218 RB398 RB518…
-
11202Y Funnel for Steel Type 1 Safety Can 1 Gal or More
Standard Shipping
$9.00Part Number: 11202Y Justrite brand 11202Y safety can funnel. This item is made of yellow plastic (polypropylene). A safety can is an approved closed container that does not exceed 5 gallons in capacity. Safety cans have a flash arresting screen, spring closing lid and spout cover, and are designed to safely relieve internal pressure when…
-
[Box of 12] DEWALT DPG83 Converter Safety Glass/Goggle Hybrid
Standard Shipping
$9.36 – $10.62Features
- Safety glass exceeds ANSI Z87.1+ standards and provides 99.9% UV protection.
- Double Duty Interchangeable Temples and Elastic Head Strap.
- FOAM SHIELD Debris Protection provides a soft, comfortable seal.
- Ratcheting Bayonet Temple Arms allow for a comfortable, customized fit.
- All lens options are ANTI-FOG.
Select Options This product has multiple variants. The options may be chosen on the product page -
[Box of 12] Dewalt DPG104 Excavator Safety Glass
Standard Shipping
$5.28 – $5.78Features
- Safety glass exceeds ANSI Z87.1+ standards.
- Lightweight, Full Frame.
- Self-Adjusting, Vented Rubber Nosepiece.
- Dual Mold Rubber temple grips.
- Impact Resistant Polycarbonate Lenses.
Select Options This product has multiple variants. The options may be chosen on the product page -
[Box of 12] Dewalt DPG101 Auger Safety Glass
Standard Shipping
$6.16 – $6.93Features
- Safety glass exceeds ANSI Z87.1+ standards.
- Full Wraparound Design
- Comfort Fit Rubber Nosepiece
- No-Slip Temple Grips
- Impact Resistant Polycarbonate Lenses
Select Options This product has multiple variants. The options may be chosen on the product page
