Showing 1281–1320 of 5463 resultsSorted by popularity
-
Free Shipping
$302.99
Features
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
- Reduced maintenance lowers operating costs and minimizes down time
- Weighs up to 30% less than gas models
- 24″ dual action double-sided steel blade provides optimal performance
-
Oversized - Special Order
$7,571.99
Features
- Makita XUC04Z delivers up to 100 minutes of run time (distance equivalent to 4.5 miles) under load using four 18V LXT® 6.0Ah BL1860 battery (battery not included)
- Holds (4) 18V LXT® Lithium-Ion batteries but operates using (2) 18V batteries at a time; utilizes additional batteries when needed (batteries not included)
- 3 forward speeds with maximum speed over 3 MPH, 1 reverse speed
- Maximum load capacity over 650 lbs
- Telescoping loading platform L(57″-63″)– W (28 ¾”-42 ½”) – H (32 ¼”- 40 ½”)
-
Standard Shipping
$3.16
Features
- One Size Fits Most
- Provides protection with concrete, self-leveling, mastic, grout and other materials.
- Resistant to most chemicals, paints and sealers
- Easy-to-spot on jobsite.
-
Standard Shipping
$1.06
Features
- ANSI/ISEA 105 – 2016 CUT Level A1
- EN 388:2016 +A1:2018 3131X
- EN ISO 21420:2020 Dexterity 5
- Palm dipped
-
Standard Shipping
$2.57
Features
- DuPont Kevlar Material
- ANSI/ISEA 105 Cut Level A2
- Full Arm Cut Protection
- Lightweight, Heat and Flame Resistant
- 1-Ply
-
Standard Shipping
$2.33
Features
- DuPont Kevlar Material
- ANSI/ISEA 105 Cut Level A2
- Full Arm Cut Protection
- Lightweight, Heat and Flame Resistant
- 1-Ply
-
Standard Shipping
$2.13
Features
- DuPont Kevlar Material
- ANSI/ISEA 105 Cut Level A2
- Full Arm Cut Protection
- Lightweight, Heat and Flame Resistant
- 1-Ply
-
Standard Shipping
$1.92
Features
- DuPont Kevlar Material
- ANSI/ISEA 105 Cut Level A2
- Full Arm Cut Protection
- Lightweight, Heat and Flame Resistant
- 1-Ply
-
Standard Shipping
$3.78
Features
- DuPont Kevlar Material
- ANSI/ISEA 105 Cut Level A3
- Full Arm Cut Protection
- Lightweight, Heat and Flame Resistant
- 2-Ply
-
Standard Shipping
$3.57
Features
- DuPont Kevlar Material
- ANSI/ISEA 105 Cut Level A3
- Full Arm Cut Protection
- Lightweight, Heat and Flame Resistant
- 2-Ply
-
Standard Shipping
$3.11
Features
- DuPont Kevlar Material
- ANSI/ISEA 105 Cut Level A3
- Full Arm Cut Protection
- Lightweight, Heat and Flame Resistant
- 2-Ply
-
Standard Shipping
$2.77
Features
- 13 Ga TEKTYE yarn
- Hook and Loop closure for a secure fit
- Seamless design provides a comfortable fit
- Meets ANSI/ISEA 105 cut level 4
- Vend pack packaging only
-
Standard Shipping
$17.13
Features
- 13 gauge salt and pepper shell with Dyneema Diamond Technology provides cut resistance
- 725 Dtex Yarn
- TPR Overlays
- Steel and fiberglass free
- Reinforced Thumb Crotch
-
Standard Shipping
$10.86
Features
- 13 gauge blue polyester shell with Dyneema Diamond Technology provides cut resistance
- 725 Dtex Yarn
- Steel and fiberglass free
- Black PU palm coating provides excellent abrasion resistance
- Radiates heat away to help keep you cool
-
Standard Shipping
$8.20
Features
- 13 gauge white polyester shell with Dyneema Diamond Technology provides cut resistance
- Steel and fiberglass free
- Gray PU palm coating provides excellent abrasion resistance
- Radiates heat away to help keep you cool
- Durable and washable for long lasting protection
-
Standard Shipping
$10.26
Features
- 15 gauge high visibility yellow polyester shell with Dyneema Diamond Technology provides cut resistance
- Steel and fiberglass free
- Black PU palm coating provides excellent abrasion resistance
- Radiates heat away to help keep you cool
- Durable and washable for long lasting protection
-
Standard Shipping
$10.40
Features
- High visibility wind and water resistant shell
- Reflective waterproof plated palm
- Polyester knit wrist
- Reflective knuckle strap
-
Standard Shipping
$8.43
Features
- TEKTYE 18-gauge blue shell with black FDG palm coating
- Touchscreen
- ANSI Cut Level A4
- Free of Fiberglass or Stainless Steel
- EN388:4X42D
-
Standard Shipping
$6.46
Features
- TEKTYE 13-gauge gray shell with FDG palm coating
- Reinforced Thumb Crotch
- ANSI Cut Level A4
- Free of Fiberglass or Stainless Steel
- EN388:4X43D
-
Standard Shipping
$5.46
Features
- TEKTYE 13-gauge orange shell with foam nitrile palm coating
- Reinforced Thumb Crotch
- ANSI Cut Level A4
- Free of Fiberglass or Stainless Steel
- EN388:4X43D
-
Standard Shipping
$7.65 – $7.88
Features
- Mig-tig select grain goatskin
- Seamless forefinger
- Wing thumb
- 4″ brown regular split shoulder cuff
- Aramid sewn
-
Standard Shipping
$7.32 – $7.54
Features
- Mig-tig select grain cowhide
- Seamless forefinger
- Wing thumb
- 4″ brown regular split shoulder cuff
- Aramid sewn
-
Standard Shipping
$6.69 – $6.92
Features
- Mig-tig regular grain cowhide
- Seamless forefinger
- Wing thumb
- 4″ blue regular split shoulder cuff
- Aramid sewn
-
Standard Shipping
$14.00
Features
- 13 gauge salt and pepper High Performance Polyethylene (HPPE) with fiberglass outer shell provides cut resistance
- Padded Palm
- Sandy foam nitrile palm coating provides protection from abrasion in wet or dry conditions
- TPR overlays provide added protection of Impact Level 2
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 5 4 4)
-
Standard Shipping
$12.13
Features
- 13 gauge knitted HPPE outer shell with a smooth blue latex coating
- 3/4 black foam latex coating
- 7 gauge acrylic inner shell
- Seamless elastic slip-on cuff
- Tested to EN388 standards for abrasion, cuts, tear and puncture (4 5 4 4)
-
Standard Shipping
$16.46
Features
- 2 ply, 13 gauge blue and white high performance polyethylene (HPPE) provides cut resistance
- Black micro nitrile palm coating provides protection from abrasion in wet or dry conditions
7 gauge acrylic terry liner provides warmth in cold conditions
- Seamless cuff design provides a comfortable fit
- High visibility TPR overlays provide added impact protection
-
Standard Shipping
$14.00
Features
- 15 gauge salt and pepper High Performance Polyethylene (HPPE) with fiberglass outer shell provides cut resistance
- High visibility red sandy foam nitrile palm coating provides protection from abrasion in wet or dry conditions
- Seamless cuff design provides a comfortable fit
- TPR overlays provide added impact protection
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 5 4 4)
-
Standard Shipping
$12.67
Features
- 13 gauge salt and pepper High Performance Polyethylene (HPPE) provides cut resistance
- High visibility red sandy foam nitrile palm coating provides protection from abrasion in wet or dry conditions
- Seamless cuff design provides a comfortable fit
- TPR overlays provide added protection of Impact Level 2
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 5 4 4)
-
Standard Shipping
$4.20
Features
- 13 gauge HPPE outer shell
- Gray PU palm coating
- Slip-on cuff design provides a comfortable fit
- Load weight of 1292g
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 5 4 3)
-
Standard Shipping
$51.20
Features
- 18 gauge gray HPPE outer shell
- Black PU palm coating provides excellent abrasion resistancev
- Slip-on cuff design provides a comfortable fit
- Load weight of 697g
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 5 3 2)
-
Standard Shipping
$4.67
Features
- 13-gauge Trosar by DSM shell made with USA manufactured fibers
- Polyurethane palm dip provides protection from abrasion in wet or dry conditions
- Seamless design provides a comfortable fit
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture ( 4 X 4 2 B)
- ANSI rated cut level A2, Abrasion 6, Puncture 3
-
Standard Shipping
$8.41
Features
- Premium side split blue cowhide leather
- Full sock lining with foam
- Reinforced palm, wing thumb
- 14″ fully welted seams
- Aramid sewn
-
Standard Shipping
$9.66
Features
- HPPE
- Cut Level A5
- Touchscreen
- Reinforced Thumb Crotch
- Black Foam NBR Coat
-
Standard Shipping
$7.80
Features
- Touchscreen Capabilities in all fingers
- 13 gauge High Performance Polyethylene (HPPE) provides cut resistance.
- Foam NBR palm dip provides protection from abrasion in wet or dry conditions
- Seamless design provides a comfortable fit
- ANSI Cut Level A2
-
Standard Shipping
$7.80
Features
- Cut level 3, high visibility HPPE shell
- Clear water based PUD coated palm
- Elastic slip-on cuff
- Made with FDA accepted material for use in food processing.Compliant with FDA 21 CFR 177.152
- ANSI Cut Level A2.|Meets EN 388:2003 standards for abrasion, cuts, tear and puncture (4 3 4 4)
-
Standard Shipping
$8.02
Features
- Select split brown cowhide leather
- Full sock lining with foam
- 14″ fully welted seams
- Aramid sewn
-
Standard Shipping
$3.86
Features
- 13 gauge High Performance Polyethylene (HPPE) provides cut resistance
- Polyurethane palm dip provides protection from abrasion in wet or dry conditions
- Seamless design provides a comfortable fit
- ANSI Cut Level A2
- Meets EN 388:2003 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 3 4 3)
-
Standard Shipping
$86.00
Features
- Blue regular shoulder split leather
- Full sock jersey lined
- Wing thumb, reinforced palm
- 14″ fully welted seams
- Aramid sewn
-
Standard Shipping
$61.66
Features
- Gray split economy shoulder cowhide leather
- Fleece cotton drill lining
- Wing thumb for comfortable fit
- 14″ one-piece back
-
Standard Shipping
$61.66
Features
- Gray split economy shoulder cowhide leather
- Fleece cotton drill lining
- Wing thumb for comfortable fit
- 14″ one-piece back
