• 03797-PWR

    Dewalt 03797-PWR Spike Forming 3/16 X 2 3/4

    Standard Shipping

    $47.96

    Features

    • 03797-PWR offer a Pre-expanded anchor design which allows for easy installation
    • Mushroom and flat head Spike anchors are tamper-proof
    • Forming Spike, which is removable, can be used for temporary installations
    • Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
  • 05523-PWR

    Dewalt 05523-PWR Spike Carbon Mh 1/4 X 1 1/4

    Standard Shipping

    $25.59

    Features

    • 05523-PWR offers a pre-expanded anchor design allowing for easy installation
    • Mushroom and flat head Spike anchors are tamper-proof
    • Forming Spike, which is removable, can be used for temporary installations
    • Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
  • 03729-PWR

    Dewalt 03729-PWR Spike Pc 1/4 X 3

    Standard Shipping

    $31.90

    Features

  • 03794-PWR

    DEWALT 03794-PWR Spike Forming 1/4 X 2-3/4

    Standard Shipping

    $59.99

    Features

    • 03794-PWR offers a pre-expanded anchor design, which allows for easy installation
    • Mushroom and flat head Spike anchors are tamper-proof
    • Forming Spike, which is removable, can be used for temporary installations
    • Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
  • DFM12724B

    Dewalt DFM12724B Ultracon+ Hwh 1/4 X 2-1/4

    Standard Shipping

    $19.15

    Features

    • DFM12724B is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
  • DFM12724B

    DEWALT DFM12722B Ultracon+ Hwh 1/4 X 1-3/4

    Standard Shipping

    $14.20

    Features

    • DFM12722B is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
  • DFM12724B

    Dewalt DFM12726B POWERS BY DEWALT Ultracon+ Hwh 1/4 X 2-3/4

    Standard Shipping

    $22.80

    Features

    • DFM12726B is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
  • DFM12724

    Dewalt DFM12728B Ultracon+ Hwh 1/4 X 3-1/4

    Standard Shipping

    $19.95

    Features

    • DFM12728B is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
  • DFM12724

    [Pack of 100] Dewalt DFM12728 DEWALT Ultracon+ Hwh 1/4 X 3-1/4

    Standard Shipping

    $18.99

    Features

    • DFM12728 is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
    • Does not exert expansion forces
  • DFM12724B

    Dewalt DFM12720B Ultracon+ Hwh 1/4 X 1-1/4-Blue

    Standard Shipping

    $14.49

    Features

    • DFM12720B is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
    • Does not exert expansion forces
  • DFM12720DFM12720

    Dewalt DFM12720 Ultracon+ Hwh 1/4 x 1-1/4

    Standard Shipping

    $10.99

    Features

    • DFM12720 is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
    • Does not exert expansion forces
  • 3GWS506P

    [Pack of 25] Simpson Strong-Tie 3GWS758P Opti-Mesh 8 in. Epoxy Adhesive Plastic Screen Tube for 3/4 in. Rod for SET-3G

    Standard Shipping

    $116.09

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    [Pack of 150] Simpson Strong-Tie 3GWS376P Opti-Mesh 6 in. Epoxy Adhesive Plastic Screen Tube for 3/8 in. Rod for SET-3G

    Free Shipping

    $549.09

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    [Pack of 100] Simpson Strong-Tie 3GWS3710P Opti-Mesh 10 in. Epoxy Adhesive Plastic Screen Tube for 3/8 in. Rod for SET-3G

    Free Shipping

    $524.49

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    [Pack of 100] Simpson Strong-Tie 3GWS506P Opti-Mesh 6 in. Epoxy Adhesive Plastic Screen Tube for 1/2 in. Rod for SET-3G

    Free Shipping

    $373.69

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS7513P Opti-Mesh 13 in. Epoxy Adhesive Plastic Screen Tube for 3/4 in. Rod for SET-3G

    Standard Shipping

    $5.99

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    [Pack of 150] Simpson Strong-Tie 3GWS373P Opti-Mesh 3-1/2 in. Epoxy Adhesive Plastic Screen Tube for 3/8 in. Rod for SET-3G

    Free Shipping

    $507.59

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS503P Opti-Mesh 3-1/2 in. Epoxy Adhesive Plastic Screen Tube for 1/2 in. Rod for SET-3G

    Standard Shipping

    $3.79

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    [Pack of 100] Simpson Strong-Tie 3GWS503P Opti-Mesh 3-1/2 in. Epoxy Adhesive Plastic Screen Tube for 1/2 in. Rod for SET-3G

    Free Shipping

    $356.79

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS3710P Opti-Mesh 10 in. Epoxy Adhesive Plastic Screen Tube for 3/8 in. Rod for SET-3G

    Standard Shipping

    $5.59

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS373P Opti-Mesh 3-1/2 in. Epoxy Adhesive Plastic Screen Tube for 3/8 in. Rod for SET-3G

    Standard Shipping

    $3.59

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS626P Opti-Mesh 6 in. Epoxy Adhesive Plastic Screen Tube for 5/8 in. Rod for SET-3G

    Standard Shipping

    $4.89

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS758P Opti-Mesh 8 in. Epoxy Adhesive Plastic Screen Tube for 3/4 in. Rod for SET-3G

    Standard Shipping

    $4.89

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS376P Opti-Mesh 6 in. Epoxy Adhesive Plastic Screen Tube for 3/8 in. Rod for SET-3G

    Standard Shipping

    $3.89

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS5010P Opti-Mesh 10 in. Epoxy Adhesive Plastic Screen Tube for 1/2 in. Rod for SET-3G

    Standard Shipping

    $4.69

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS6210P Opti-Mesh 10 in. Epoxy Adhesive Plastic Screen Tube for 5/8 in. Rod for SET-3G

    Standard Shipping

    $5.19

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    [Pack of 25] Simpson Strong-Tie 3GWS6210P Opti-Mesh 10 in. Epoxy Adhesive Plastic Screen Tube for 5/8 in. Rod for SET-3G

    Standard Shipping

    $122.19

    Features

    • 3GWS6210P Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • SET3G10

    [Pack of 12] Simpson Strong-Tie SET3G10 8.5-oz. High-Strength Epoxy Adhesive w/ 1 Nozzle and Extension

    Free Shipping

    $316.84

    Features

    • SET3G10 REPLACES SET-XP10
    • Improved sustained load performance at elevated temperature.
    • Can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
    • Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
    • Approved for installation with multiple vacuum-drill bit systems without further hole cleaning.
      See Code Report (ESR-4057) and Engineering Letter for approved systems.
  • ET3G22-N

    [Pack of 8] Simpson Strong-Tie ET3G22-N 22-oz. Epoxy Adhesive Cartridge w/ Nozzle and Extension

    Free Shipping

    $210.39

    Features

    • ET3G22-N is suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
    • Ideal for general doweling and threaded rod applications
    • Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
  • ET3G10

    [Pack of 12] Simpson Strong-Tie ET3G10 8.5-oz. Epoxy Adhesive Cartridge w/ Nozzle and Extension

    Free Shipping

    $249.09

    Features

    • ET3G10 is suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
    • Ideal for general doweling and threaded rod applications
    • Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
  • ET3G56

    [Pallet of 216] Simpson Strong-Tie ET3G56 | 56-oz. Epoxy Adhesive Cartridge

    Oversized Shipping

    $18,051.29

    Features

    • ET3G56 is suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
    • Ideal for general doweling and threaded rod applications
    • Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
  • SET3G22-N

    [Pallet of 540] Simpson Strong-Tie SET3G22-N 22-oz. High-Strength Epoxy Adhesive w/ Nozzle and Extension

    Oversized Shipping

    $27,925.59

    Features

    • SET3G22-N offers exceptional performance — superior bond strengths permit ductile solutions in high seismic areas.
    • Design flexibility — improved sustained load performance at elevated temperature.
    • Jobsite versatility — can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
    • Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
    • Approved for installation with multiple vacuum-drill bit systems without further hole cleaning. See Code Report (ESR-4057) and Engineering Letter for approved systems.
  • SET3G56

    [Pallet of 216] Simpson Strong-Tie SET3G56 | 56-oz. High-Strength Epoxy Adhesive

    Oversized Shipping

    $25,065.19

    Features

    • SET3G56 offers exceptional performance — superior bond strengths permit ductile solutions in high seismic areas.
    • Design flexibility — improved sustained load performance at elevated temperature.
    • Jobsite versatility — can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
    • Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
    • Approved for installation with multiple vacuum-drill bit systems without further hole cleaning. See Code Report (ESR-4057) and Engineering Letter for approved systems.
  • SET3G22-N

    [Pack of 10] Simpson Strong-Tie SET3G22-N 22-oz. High-Strength Epoxy Adhesive w/ Nozzle and Extension

    Free Shipping

    $556.79

    Features

    • SET3G22-N offers exceptional performance — superior bond strengths permit ductile solutions in high seismic areas.
    • Design flexibility — improved sustained load performance at elevated temperature.
    • Jobsite versatility — can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
    • Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
    • Approved for installation with multiple vacuum-drill bit systems without further hole cleaning. See Code Report (ESR-4057) and Engineering Letter for approved systems.
  • ET3G10

    [Pallet of 900] Simpson Strong-Tie ET3G10 8.5-oz. Epoxy Adhesive Cartridge w/ Nozzle and Extension

    Oversized Shipping

    $17,356.99

    Features

    • ET3G10 is suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
    • Ideal for general doweling and threaded rod applications
    • Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
  • SET3G10

    [Pallet of 900] Simpson Strong-Tie SET3G10 8.5-oz. High-Strength Epoxy Adhesive w/ 1 Nozzle and Extension

    Free Shipping

    $21,228.00

    Features

    • SET3G10 REPLACES SET-XP10
    • Sustained load performance at elevated temperature.
    • Can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
    • Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
    • Approved for installation with multiple vacuum-drill bit systems without further hole cleaning.
      See Code Report (ESR-4057) and Engineering Letter for approved systems.
  • SET3G56

    [Pack of 6] Simpson Strong-Tie SET3G56 | 56-oz. High-Strength Epoxy Adhesive

    Free Shipping

    $749.69

    Features

    • SET3G56 has exceptional performance — superior bond strengths permit ductile solutions in high seismic areas.
    • Design flexibility — improved sustained load performance at elevated temperature.
    • Jobsite versatility — can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
    • Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
    • Approved for installation with multiple vacuum-drill bit systems without further hole cleaning. See Code Report (ESR-4057) and Engineering Letter for approved systems.
  • SET3G10

    Simpson Strong-Tie SET3G10 8.5-oz. High-Strength Epoxy Adhesive w/ 1 Nozzle and Extension

    Standard Shipping

    $29.39

    Features

    • SET3G10 REPLACES SET-XP10
    • Sustained load performance at elevated temperature.
    • Can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
    • Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
    • Approved for installation with multiple vacuum-drill bit systems without further hole cleaning.
      See Code Report (ESR-4057) and Engineering Letter for approved systems.
  • AT3G10

    [Pallet of 576] Simpson Strong-Tie AT3G10 9.5-oz. High-Strength Acrylic Anchoring Adhesive Cartridge w/ Nozzle

    Oversized Shipping

    $11,108.49

    Features

    • AT3G10 is excellent for use in cold weather conditions or applications where fast cure is required
    • Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
    • Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
    • Base material installation temperatures down to 0°F (-18°C)
    • Use in grout-filled CMU construction
  • ET3G22-N

    Simpson Strong-Tie ET3G56 | 56-oz. Epoxy Adhesive Cartridge

    Standard Shipping

    $97.39

    Features

    • ET3G56 is suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
    • Ideal for general doweling and threaded rod applications
    • Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)