Showing 961–1000 of 5410 results

  • 08132N-PWR

    DeWalt 08132N-PWR Power foam 29Oz. [750ML]

    Standard Shipping

    $18.58

    Features

    • CFC free propellant
    • Class B2 Flame retardant
    • Physiologically harmless when fully cured
    • Contains no urea formaldehyde or PCB’s
    • Does not rot or deteriorate with age
  • 08321SD-PWR08321SD-PWR

    DeWalt 08321SD-PWR Pure110+ 20.5 Oz [610Ml] 1-1

    Standard Shipping

    $36.69

    Features

    • Designed for use with threaded rod and reinforcing bar hardware elements
    • Evaluated and recognized for freeze/thaw performance
    • Cartridge design allows for multiple uses using extra mixing nozzles
    • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
    • Evaluated and recognized for long term and short term loading (see performance tables)
  • 08605-PWR08605-PWR

    DeWalt 08605-PWR Pure50 20.5 Oz [610Ml] 1-1

    Standard Shipping

    $34.99

    Features

    • Designed for use with threaded rod and reinforcing bar hardware elements
    • Evaluated and recognized for freeze/thaw performance
    • Cartridge design allows for multiple uses using extra mixing nozzles
    • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
    • Evaluated and recognized for long term and short term loading (see performance tables for applicable temperature ranges)
  • OCTO72OCTO72

    Marshalltown OCTO72 Octagon Handles

    Oversized - Special Order

    $36.89

    Features

    • Octagon shape increases grip strength by an average of 20%
    • Choose your preferred handle style and diameter
    • Handles are 72”
    • Sag and oxidation resistant
    • Comes with quick connect snap springs for easy attachment
  • 7446SD1-PWR

    [Pack of 25] DeWalt 7427SD1-PWR 1/2 in x 8-1/2 in Power-Stud+ SD1 Wedge Expansion Anchor

    Standard Shipping

    $33.75

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
  • 7446SD1-PWR

    [Pack of 25] DeWalt 7426SD1-PWR 1/2 X 7 Power-Stud Plus SD1 Wedge Expansion Anchor

    Standard Shipping

    $26.05

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
  • 7446SD1-PWR

    [Pack of 50] DeWalt 7424SD1-PWR 1/2 in x 5-1/2 in Power-Stud Plus SD1 Wedge Expansion Anchor, Carbon Steel

    Standard Shipping

    $42.35

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
  • 7446SD1-PWR

    [Pack of 50] DeWalt 7422SD1-PWR 1/2 X 3-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    Standard Shipping

    $34.49

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
  • 7446SD1-PWR

    [Pack of 50] DeWalt 7420SD1-PWR 1/2 X 2-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    Standard Shipping

    $36.99

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
  • 7446SD1-PWR

    [Pack of 50] DeWalt 7416SD1-PWR 3/8 X 5 Power-Stud Plus SD1 Wedge Expansion Anchor

    Standard Shipping

    $26.65

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
  • 7446SD1-PWR

    [Pack of 50] DeWalt 7415SD1-PWR 3/8 X 3-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    Standard Shipping

    $23.35

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
  • 7446SD1-PWR

    [Pack of 50] DeWalt 7414SD1-PWR 3/8 X 3-1/2 Power-Stud Plus SD1 Wedge Expansion Anchor

    Standard Shipping

    $24.50

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
  • 7446SD1-PWR

    [Pack of 50] DeWalt 7412SD1-PWR 3/8 X 2-3/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    Standard Shipping

    $17.79

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
  • 7446SD1-PWR

    [Pack of 50] DeWalt 7410SD1-PWR 3/8 X 2-1/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    Standard Shipping

    $16.99

    Features

    • Consistent performance in high and low strength concrete
    • Nominal drill bit size is the same as the anchor diameter
    • Anchor can be installed through standard fixture holes
    • Length ID code and identifying marking stamped on head of each anchor
    • Anchor design allows for follow-up expansion after setting under tensile loading
  • 7446SD1-PWR

    [Pack of 100] Dewalt 7402SD1-PWR 1/4 X 2-1/4 Power-Stud Plus SD1 Wedge Expansion Anchor

    Standard Shipping

    $22.35

    Features

    • Structural connections, i.e., bean and column anchorage
    • Safety related attachments
    • Interior applications / low level corrosion environment
    • Tension zone applications, i.e., cable trays and strut, pipe supports, fire sprinklers
    • Seismic and wind loading
  • 02820-PWR

    [Pack of 100] Dewalt 02820-PWR 1/4″ X 1-1/2″ Zamac Nailin Hammer Drive Anchor, Mushroom Head

    Standard Shipping

    $12.99

    Features

    • General purpose anchoring
    • 02820-PWR installs in a variety of base materials
    • Roof Flashing
    • Mechanical Attachments
  • 02820-PWR

    [Pack of 100] Dewalt 02814-PWR 1/4″ X 1-1/4″ Zamac Nailin Hammer Drive Anchor, Mushroom Head

    Standard Shipping

    $10.99

    Features

    • General purpose anchoring
    • 02814-PWR installs in a variety of base materials
    • Roof Flashing
    • Mechanical Attachments
  • 03797-PWR

    Dewalt 03797-PWR Spike Forming 3/16 X 2 3/4

    Standard Shipping

    $47.96

    Features

    • 03797-PWR offer a Pre-expanded anchor design which allows for easy installation
    • Mushroom and flat head Spike anchors are tamper-proof
    • Forming Spike, which is removable, can be used for temporary installations
    • Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
  • 05523-PWR

    Dewalt 05523-PWR Spike Carbon Mh 1/4 X 1 1/4

    Standard Shipping

    $25.59

    Features

    • 05523-PWR offers a pre-expanded anchor design allowing for easy installation
    • Mushroom and flat head Spike anchors are tamper-proof
    • Forming Spike, which is removable, can be used for temporary installations
    • Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
  • 03729-PWR

    Dewalt 03729-PWR Spike Pc 1/4 X 3

    Standard Shipping

    $31.90

    Features

  • 03794-PWR

    DEWALT 03794-PWR Spike Forming 1/4 X 2-3/4

    Standard Shipping

    $59.99

    Features

    • 03794-PWR offers a pre-expanded anchor design, which allows for easy installation
    • Mushroom and flat head Spike anchors are tamper-proof
    • Forming Spike, which is removable, can be used for temporary installations
    • Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
  • DFM12724B

    Dewalt DFM12724B Ultracon+ Hwh 1/4 X 2-1/4

    Standard Shipping

    $19.15

    Features

    • DFM12724B is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
  • DFM12724B

    DEWALT DFM12722B Ultracon+ Hwh 1/4 X 1-3/4

    Standard Shipping

    $14.20

    Features

    • DFM12722B is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
  • DFM12724B

    Dewalt DFM12726B POWERS BY DEWALT Ultracon+ Hwh 1/4 X 2-3/4

    Standard Shipping

    $22.80

    Features

    • DFM12726B is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
  • DFM12724

    Dewalt DFM12728B Ultracon+ Hwh 1/4 X 3-1/4

    Standard Shipping

    $19.95

    Features

    • DFM12728B is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
  • DFM12724

    [Pack of 100] Dewalt DFM12728 DEWALT Ultracon+ Hwh 1/4 X 3-1/4

    Standard Shipping

    $18.99

    Features

    • DFM12728 is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
    • Does not exert expansion forces
  • DFM12724B

    Dewalt DFM12720B Ultracon+ Hwh 1/4 X 1-1/4-Blue

    Standard Shipping

    $14.49

    Features

    • DFM12720B is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
    • Does not exert expansion forces
  • DFM12720DFM12720

    Dewalt DFM12720 Ultracon+ Hwh 1/4 x 1-1/4

    Standard Shipping

    $10.99

    Features

    • DFM12720 is available in several head styles
    • Several colors and finishes to match application
    • Removable (reusable in wood)
    • High-low thread design for greater stability and grip
    • Does not exert expansion forces
  • 3GWS506P

    [Pack of 25] Simpson Strong-Tie 3GWS758P Opti-Mesh 8 in. Epoxy Adhesive Plastic Screen Tube for 3/4 in. Rod for SET-3G

    Standard Shipping

    $116.09

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    [Pack of 150] Simpson Strong-Tie 3GWS376P Opti-Mesh 6 in. Epoxy Adhesive Plastic Screen Tube for 3/8 in. Rod for SET-3G

    Free Shipping

    $549.09

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    [Pack of 100] Simpson Strong-Tie 3GWS3710P Opti-Mesh 10 in. Epoxy Adhesive Plastic Screen Tube for 3/8 in. Rod for SET-3G

    Free Shipping

    $524.49

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    [Pack of 100] Simpson Strong-Tie 3GWS506P Opti-Mesh 6 in. Epoxy Adhesive Plastic Screen Tube for 1/2 in. Rod for SET-3G

    Free Shipping

    $373.69

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS7513P Opti-Mesh 13 in. Epoxy Adhesive Plastic Screen Tube for 3/4 in. Rod for SET-3G

    Standard Shipping

    $5.99

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    [Pack of 150] Simpson Strong-Tie 3GWS373P Opti-Mesh 3-1/2 in. Epoxy Adhesive Plastic Screen Tube for 3/8 in. Rod for SET-3G

    Free Shipping

    $507.59

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS503P Opti-Mesh 3-1/2 in. Epoxy Adhesive Plastic Screen Tube for 1/2 in. Rod for SET-3G

    Standard Shipping

    $3.79

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    [Pack of 100] Simpson Strong-Tie 3GWS503P Opti-Mesh 3-1/2 in. Epoxy Adhesive Plastic Screen Tube for 1/2 in. Rod for SET-3G

    Free Shipping

    $356.79

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS3710P Opti-Mesh 10 in. Epoxy Adhesive Plastic Screen Tube for 3/8 in. Rod for SET-3G

    Standard Shipping

    $5.59

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS373P Opti-Mesh 3-1/2 in. Epoxy Adhesive Plastic Screen Tube for 3/8 in. Rod for SET-3G

    Standard Shipping

    $3.59

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS626P Opti-Mesh 6 in. Epoxy Adhesive Plastic Screen Tube for 5/8 in. Rod for SET-3G

    Standard Shipping

    $4.89

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
  • 3GWS506P

    Simpson Strong-Tie 3GWS758P Opti-Mesh 8 in. Epoxy Adhesive Plastic Screen Tube for 3/4 in. Rod for SET-3G

    Standard Shipping

    $4.89

    Features

    • Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
    • Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
    • Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
    • Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.