Showing 41–80 of 5211 results
-
Standard Shipping
$1.08
Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested, load rated and code compliant
-
Special Order Shipping
$3.81
HANDLE-STRUCTURAL FOAM, BLACK
Minimum order quantity: 12
Order in multiples of: 12
-
Standard Shipping
$20.38
Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 30% smoother cutting than segmented blades
- Carefully tensioned for less vibration and a superior user experience
- Strict quality control measures ensure superior performance
- Dry or wet cutting for added versatility
-
Standard Shipping
$12.06
Features
- White grain goatskin driver with TPR overlays
- Slip-on cuff design and keystone thumb provides a comfortable fit
- TPR overlays for added impact protection
- ANSI/ISEA 138 Impact Level 2
-
Free Shipping
$279.64
Features
- 21 Gauge Steel Tie Wire
- Bare steel with no coating
- For use with MAX RB397, RB398, RB517 and RB518
-
Standard Shipping
$27.49
Features:
- Top Grain Goatskin leather construction is the softest, most abrasion-resistant leather and is highly recommended for applications requiring tactile sensitivity
- Top Grain leather is smooth, provides durability and dexterity
- Kevlar? blended fiber liner on palm for superior cut protection
- Thermo Plastic Rubber (TPR) back-of-hand impact resistance to knuckles and fingers by dispersing impact force energy away from the bone, without sacrificing dexterity
- ANSI Level 4 Puncture Resistance
- Hook & loop closure for easy on/off and a secure fit
-
Standard Shipping
$31.49
Features
- Can be used where quick-to-install posts are needed, including fencing and mailbox applications
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive® SDS Connector screw
-
Special Order Shipping
$7.16
-
Standard Shipping
$5.19
Features
- The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
- May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
- May be sloped up from 0° to 45°.
- For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam (see “Max. C1” dimension in Standard Installation table).
- Can be installed using nails or Strong-Drive SD Connector screws.
-
Special Order Shipping
$4.90
-
Standard Shipping
$52.79
Features:
- Exceptional performance superior bond-strength values at long-term elevated temperature of 110 degreeF (43 degreeC) using optimized drill bit diameters
- Tested and assessed in accordance with ICC-ES AC308 and ACI 355.4 for use in cracked and uncracked normal-weight and lightweight concrete
- Design flexibility can be specified for dry or water-saturated conditions when temperatures range from -40 degreeF (-40 degreeC) to 176 degreeF (80 degreeC)
- Jobsite versatility can be installed in dry, water-saturated or water-filled holes in base materials with temperatures between 40 degreeF (4 degreeC) and 100 degreeF (38 degreeC)
- Maximized production and safety qualified for installation using the Speed Clean? DXS dust extraction drilling system as an alternative to the conventional blow-brush-blow hole-cleaning method
-
Standard Shipping
$0.43
Features:
- Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
- Positive-set marking system indicates when anchor is properly set
- Zinc-plated carbon steel
- Length: 2 in.
- Drill bit diameter: 5/8 in.
Minimum order quantity: 50
Order in multiples of: 50
-
Standard Shipping
$13.29
Features:
- Engineered microfiber Tough-X? reinforced suede palm enhances grip in dry and light oil applications while providing dexterity
- ToughX? suede performance material is fast drying and lasts up to 5x longer than traditional synthetic leathers
- Silicone honeycomb TPR knuckle guard for medium duty impact protection
- Reinforced fingertips and thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in a high-wear area
- Sweat Wipe – terry cloth wipe on the back of the thumb makes it easy to wipe away sweat and grime
- Hook and loop closure
- Touchscreen on index finger
- Launderable for extended life and to reduce replacement costs
-
Standard Shipping
$4.19
Features:
- Vend pack ready for Personal Protective Equipment (PPE) vending machines in the industrial workplace
- MicroFoam Nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance
- Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves
- Knit Wrist helps prevent dirt and debris from entering the glove
- 360? Breathability – Patented micro-foam nitrile coating offers 360? breathability, making it the most breathable glove on the market today
- 25% Thinner – Than most foam nitrile gloves on the market while offering twice the mechanical performance
- Form, Fit and Feel – Mimics the “hand at rest”, reducing hand fatigue and increasing comfort
- Latest Knitting Technology – Utilized to produce smooth and rounded fingertips, improving fingertip sensitivity
- Consistent Liner Penetration – From the nitrile, leaving only the soft liner resting against the skin
- Optimized Grip – The micro-cup finish allows for a controlled grip
- Silicone and Latex free
- Complies with FDA food handling requirements 21 CFR, Part 177
- All ingredients used in the manufacturing and construction of this product are compliant with the REACH legislation
- This glove has been laundered prior to final packaging making it clean and safe for use
- The Oeko-Tex? Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin
- The Skin Health Alliance has awarded professional dermatological accreditation following review of the scientific dossier behind this product
- This style is also available pair tagged with triangle eyelet for easy showroom display (34-874T)
-
Standard Shipping
$9.99
Features:
- Synthetic leather palm enhances grip in dry and light oil applications while providing dexterity
- PVC grip on index finger and thumb for fine parts handling
- Reinforced thumb crotch for extended glove life, enhanced comfort, increased abrasion resistance and added durability in a high-wear area
- Spandex fabric back for comfort and breathability
- Elastic wrist for easy on/off
- Lycra fabric fourchettes enhance the natural contour of the glove for a better fit
- Hi-Vis coloring and reflective binding makes this product very easy to see in low-light applications
- Launderable for extended life and to reduce replacement costs
-
Free Shipping
$162.16
Features
- REPLACES JPL91440A 4.0AH BATTERY
- 14.4 Volts 5 Amp Hour capacity
- Works with RB217, RB218, RB397, RB398, RB441T, RB517, RB518, RB441T, RB611T, RB401T-E, and PJID143 tool models.
- Fully charged in 40 minutes or less.
- Built in charge indicator gauge on battery casing.
- Compatible with Max JC914, JC925 and JC928 chargers.
-
Special Order Shipping
$3.47
POINTING TROWEL
Minimum order quantity: 12
Order in multiples of: 12
-
Free Shipping
$128.99
Features
- 15AMP 5800RPM motor
- Heavy gauge aluminum base
- Lower guard design
- Two built-in LED lights
- Built-in dust blower
- AC/DC Power Switch for use with alternate power supplies
-
Standard Shipping
$9.39
Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
-
Standard Shipping
$23.49
APHH heavy hangers connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents® structural wood screw and hex-head washer, and to the header with the Strong-Drive® SDS…
-
Standard Shipping
$4.49
Features:
- Vend pack ready for Personal Protective Equipment (PPE) vending machines in the industrial workplace
- Seamless construction offers increased comfort and breathability
- PolyKor? blended shell is lightweight and provides excellent dexterity, tactile sensitivity, and cut resistance
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
- Knit Wrist helps prevent dirt and debris from entering the glove
- Color coded hems for easy size identification
- Washable, resistant to chemicals, water, and ultraviolet light
-
Standard Shipping
$15.18
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$1.22
Features:
- Can be used to make a connection to either the top or bottom plate
- Embossment in the angle reinforces the plate
- Sill plate installation: fill all round holes
- Width: 1-3/8 in.
- Height: 6-11/16 in.
-
Free Shipping
$2,784.93
Features:
- Double Tying Speed increases productivity
- Cost Saving – Mechanism dispenses precise amount of wire
- Shorter Tie Height
- Large Jaw – up to #7 x #7 rebar
- Long Battery Life up to 4,000 ties
- Easy Push Gear Release
- Fast Load Wire
-
Standard Shipping
$14.20
Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 30% smoother cutting than segmented blades
- Carefully tensioned for less vibration and a superior user experience
- Made with high quality diamonds
- Dry or wet cutting for added versatility
-
Standard Shipping
$102.77
- 1-1/2×0.145in Smooth Shank Concrete Pin
- Max Powerlite Fasteners
- Plywood To Concrete
- Fiber Cement Siding To Concrete
- Mechanically Galvanized Carbon Steel
-
Standard Shipping
$4.99
Features
- Lightweight, semi-rimless design provides all day user comfort
- Sleek, sporty style with wraparound lens protection
- Bayonet temples with flexible rubber tips offer a comfortable, secure fit
- Soft rubber nose pads help keep the glasses in place
- Meets ANSI Z87.1+
-
Standard Shipping
$5.29
Features
- The open design and ability to field-adjust the slope make the LRUZ ideal for both retrofit or new applications.
- May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
- May be sloped up from 0° to 45°.
- For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam
- Can be installed using nails or Strong-Drive® SD Connector screws.
-
Special Order Shipping
$9.14
HANDLE-MAGNESIUM FLOAT-DURASOFT
Minimum order quantity: 12
Order in multiples of: 12
-
Special Order Shipping
$5.07
GROOVER
Minimum order quantity: 12
Order in multiples of: 12
-
Special Order Shipping
$4.89
EDGER
Minimum order quantity: 12
Order in multiples of: 12
-
Standard Shipping
$39.72
- This item has been DISCONTINUED.- SEE ET3G22-N FOR UPDATED MODEL
-
Standard Shipping
$6.69
Features
- Versatile utility connector for joining wood members together in a corner connection without angled cuts
- Fastens with Simpson Strong-Tie® Outdoor Accents 1 1/2″ connector screws (not included)
- Easier and stronger than angled fastening
-
Standard Shipping
$35.89
Features:
- Steel Blade Placer With No Hook
- Concrete kumalong
- 14 Gauge Steel
- Painted Finish Resists Rust and Corrosion
- 60 Inch Contoured and Tapered Handle
-
Standard Shipping
$10.29
Features
- DFM12722 is available in several head styles
-
Standard Shipping
$46.29
Features
- APVB66R is designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$36.59
Features:
- Gunn cut pattern delivers excellent durability, wear and comfort, especially for heavier gloves
- Wing thumb increases comfort in open-handed work
- Rugged extra strength back and cuff
- Leather knuckle strap and finger tips for extra protection
- Elastic closure sewn inside glove for safety and comfort
- Duck safety cuff helps protect wrist, allows for fast removal, and is washable for longer wear
-
Standard Shipping
$5.59
Features
- 14 gauge
- ZMAX galvanized with black powder coat
-
Free Shipping
$379.00
Features
- Brushless motor delivers up to 75% more runtime vs. 18v NiCad brushed motors
- XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs
- 1/2-in ratcheting nitro-carburized metal chuck with carbide inserts
- 3-Mode LED up to 20X brighter than previous model
- LED spotlight mode features 20 minute shutoff function allowing for extended work time
- 3-speed all-metal high performance transmission
- 0-450/0-1300/0-2000 RPM in drill mode
- 0-500/0-1500/0-2250 RPM in hammer drill mode
-
Special Order Shipping
$40.77
