Showing 5321–5360 of 5407 results
-
Slant Anchor Installation Guidelines:
- Position and secure the Slant Anchor before casting panel.
- Erect panel, brace and install bearing grout as required.
- Locate and remove foam Void Former from connection face.
- Drill 1” diameter hole into the foundation using the sleeve as a guide.
- Remove dust from hole using compressed air, vacuum and/or bottle brush.
- Mix Flowable Grout and pour into the connection cavity until half full.
- Place Ductile Bar into sleeve and foundation immediately after grouting.
- Add additional grout to cover the bar and fill the cavity.
- Allow grout to cure before patching/finishing the panel face.
Get Your Tilt Up Project Quoted
-
Connecting:
- User must conduct a visual inspection to detect any possible damage or defects in the Lifter before use.
- The ring-shape of the Lifter hooks onto the loop of the insert for lifting.
- Move the handle to “open” the Lifter ring, position the Lifter over the insert and move the handle to “close”the ring.
More About Tilt Up
Get Your Tilt Up Project Quoted
-
-
Helical Ground Anchors are both economical and effective:
- Eliminates forming and handling a concrete deadman at each brace location.
- Eliminates drilling, bolting and patching the floor slab at each brace location.
- Torque installation method produces a verifiable load rating in all soil conditions.
- Provides a quick installation and removal method for anchor placement.
- Compatible with Helical Anchor Extensions, HGA Brackets and Pipe Braces.
Get Your Tilt Up Project Quoted
-
-
Standard Shipping
$54.94
Features:
- Made with High Carbon Steel
- Squared Edges for Precision
- 16in long x 4in wide
- DuraSoft handle provides user comfort
-
Quote Request - Shipping Calculated Later
$0.00
Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
-
Quote Request - Shipping Calculated Later
$0.00
Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
-
Quote Request - Shipping Calculated Later
$0.00
Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
-
Quote Request - Shipping Calculated Later
$0.00
Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
-
$3,299.00
OBSOLETE ITEM DISCONTINUED BY MAX – NO STOCK AVAILABLE
Features:
- Uses 16 gauge rebar tie wire TW1525, TW1525-EG, TW1525-PC
- The large jaw enables the TwinTier to tie up to a #7 x #7 rebar.
- One charge of the long lasting battery can tie up to 4 coils.
-
Special Order Shipping
$2,502.30
SPECIAL ORDER ONLY – WE DO NOT STOCK THIS BARE TOOL
Features:
- A Dual Wire Feeding Mechanism increases productivity.
- The Wire Pull-Back Mechanism dispenses the precise amount of wire needed to form a tie, reducing wire usage.
- The Wire Bending Mechanism produces a shorter tie height. Less concrete is needed to fully cover a wire tie.
- The large jaw enables the TwinTier to tie up to a #7 x #7 rebar.
- One charge of the battery can yield up to 4,000 ties.
- Greater protection against debris and moisture entering the tool.
- Effortlessly open gears to quickly feed wire when loading the tool.
- Rapidly load the dual wire coil with the quick load magazine design.
-
Free Shipping
$357.11
Features
- Wire steel is melted, annealed and drawn in the U.S.A
- Steel mill certification available
- For use with MAX RB397, RB398, RB517 and RB518
-
Special Order Shipping
$349.61
Features
- 21 Gauge Electro Galvanized Steel Tie Wire
- Excellent resistance to corrosion and rust
- For use with MAX RB397, RB398, RB517 and RB518
-
Free Shipping
$897.60
Features:
- Stainless Steel Wire Resists Rust and Corrosion
- Use with stainless steel rebar
- 19 Gauge Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
Standard Shipping
$29.99
Features:
- 1/4 inch 50ft professional polyurethane air hose
- 40% lighter than PVC and stays flexible in cold weather
- 300PSI max with 3 to 1 burst ratio
- Crimped on compression ring with 6 ball brass fitting
-
Free Shipping
$199.00
Features:
- Discontinued – No longer available
- 6 Gallon pancake style tank
- 2.8 CFM delivered at 90 PSI
- Industrial regulator and gauges
- Compact and lightweight
- 1-HP oil-free high efficiency motor
-
Free Shipping
$2,999.99 – $3,525.48
Features:
- 46 inch ring guard diameter
- Honda GX340 10.7HP Motor
- 4 Blades with 90 to 155 RPM Blade Speed
-
Standard Shipping
$138.99
Features:
- One touch electronic speed control
- 3 speeds – low, medium, and high
- Pad brake for reduced free spin
- 3 Year Limited Warranty
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
-
Free Shipping
$225.99
Features:
- Delivers 0-2600 1 inch strokes per minute with 3 orbital and one straight cut setting.
- Has lower vibration and less noise.
- Weighs only 6.4lbs with battery (not included).
- Tool-less blade change.
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
-
Standard Shipping
$191.99
Features:
- Delivers up to 8500rpm
- Auto-stop Active Feedback-sensing Technology protects motor
- Automatic Speed Change technology adjusts speed and torque under load for optimum performance
- Weighs only 5.6 pounds and is 14-1/4in long
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
-
Standard Shipping
$155.99
Features:
- Delivers up to 2800 strokes per minute
- Long 1-1/4 inch cutting stroke
- Electric brake and tool-less blade changes
- Compact and ergonomic at only 19-1/8inches long
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
-
Free Shipping
$361.25
Features:
- Reaches a full charge in 45 minutes or less
- Provides up to 65% more run time per charge
- Battery delivers consistent power and run time in extreme temperatures to -4°F
- Battery resists self-discharge and remains ready for use even after long periods of storage
- Comes with 2 5.0Ah batteries, a rapid charger, and tool bag.
-
-
$0.00
The RB398 is now obsolete and has been replaced with the RB398S
ADD TO CART & CHECK OUT. Once we receive your request, we will contact you with pricing for shipping and to collect payment info for this product.
- 5 times faster than manual tying. Makes ties in less than 1 sec. with a consistent tie strength.
- Lightweight and compact body for easy maneuvering and one handed operation.
- Li-ion battery can complete 2600 ties per charge.
- Ties approximately 120 times per coil.
- Brushless twisting motor
-
Standard Shipping
$50.99
Features:
- Extreme durability and longer life when digging into dirt, soil, hard clay and packed gravel
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Ideal for plumbers and landscapers when creating holes, tunnels and trenches
- Maximum performance in cordless and corded SDS-Max rotary hammer
-
Standard Shipping
$22.49
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition work, thin-set removal, cleaning concrete, and removing scale and rust
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Bracing ribs deliver superior stability and rigidity
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers
-
Standard Shipping
$15.59
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition work, adjustment work, restoring joints and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Unique Dual-Tooth jam-free design creates multi-directional fractures for faster rate of material removal
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers
-
Standard Shipping
$12.69
Features:
- Extreme durability and longer life in general demolition and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Twist Point design resists jamming for faster chipping and material evacuation
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers
-
$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- Water-based
- Inverted Marking Paint
- Can use on:
- Concrete
- Pavement
- Grass
- Gravel
- and More
-
$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- Water-based
- Inverted Marking Paint
- Can use on:
- Concrete
- Pavement
- Grass
- Gravel
- and More
-
Free Shipping
$339.99
Features
- The Northrock Industries Flexible Concrete Vibrator Shaft is interchangeable with all major brands of concrete vibrator heads.
- Used to connect a concrete vibrator to a concrete vibrator head.
-
Free Shipping
$302.47
Features:
- The Northrock Industries 25J2 Steel Concrete Vibrator Head is interchangeable with all major brands of concrete vibrator shafts.
- Scientifically designed to provide maximum amplitude.
-
Free Shipping
$227.97
Features:
- The Northrock Industries 25G15 Steel Concrete Vibrator Head is interchangeable with all major brands of concrete vibrator shafts.
- Scientifically designed to provide maximum amplitude.
-
Standard Shipping
$9.99
Features
- Evaporative cooling material keeps you cool for hours
- Keeps your head cool and blocks sun from your neck
- Made from soft quilted hi-vis material for greater visibility
- Fits on the suspension of a hard hat with hook and loop closures
- To activate, soak in cool water for 2-5 minutes
- Reusable – just reactivate
- One size fits all
- This accessory has been third-party tested and can be worn under ANSI/ISEA compliant Pyramex hard hats (except SL Sleek Shell series)
-
Standard Shipping
$7.99
Features
- Evaporative cooling material provides hours of heat stress relief
- Fits on the suspension of a hard hat with hook and loop closures
- To activate, soak in cool water for 2-5 minutes
- Reusable – just reactivate
- One size fits all
- This accessory has been third-party tested and can be worn under ANSI/ISEA compliant Pyramex hard hats (except SL Sleek Shell series)
-
$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 325 Lumen
- Super Bright High Power COB LED
- Motion Sensor Function
- 3 Light Modes
- Durable Adjustable Head Strap
- Rechargeable Battery
- 325 Lumen
- 3 Watt
- 3 Light Modes – High-Low and Strobe
- Motion Sensor Function
- Adjustable Lamp Head
- Adjustable Head Strap
- Charging Cord Included
- Lithium Rechargeable Battery
-
$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 300 PSI Burst Strength
- Industrial Strength Male & Female Couplings
- Commercial Strength
- Heavy Duty Strain Relief Spring
- 100 foot
- 5/8 inch diameter
- Black
-
$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 300 PSI Burst Strength
- Industrial Strength Male & Female Couplings
- Commercial Strength
- Heavy Duty Strain Relief Spring
- 50 foot
- 5/8 inch diameter
- Black
-
$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 12 Gauge
- -Lighted Receptacle Shows Power is On
- -40˚F to 140˚Fahrenheit
- Water/Weather Resistant
- 100 foot
- SJTW, 12/3 AWG
- 5-15 plug
- 5-15 receptacle
- 15 amp
- 1875 watts
- cULus Approval