Showing 361–400 of 5468 resultsSorted by popularity
-
Standard Shipping
$29.59
Features:
- Synthetic leather palm enhances grip in dry and light oil applications while providing dexterity
- PVC on palm, thumbcrotch and fingertips provides an enhanced grip and extra cut/abrasion resistance
- Reinforced Kevlar thumb saddle for durability
- Thermo Plastic Rubber (TPR) molded finger, thumb guards and back of the hand for maximum protection
- Slip on neoprene wrist for comfort
- ANSI 105 Cut Resistance Level A6
- ANSI 105 Conductive Heat Resistance Level 4
-
Standard Shipping
$11.29
Features:
- Patented design on the inside and outside of the glove provides extra traction with oily or wet parts
- 6 mil proprietary nitrile blend with patented fish scale pattern is more tear-resistant and puncture-resistant than conventional single-use disposable gloves ? for prolonged use and reduced waste
- ESD Safe, Surface Resistance per ASTM D257, Static dissipative range at 10^8 ohms, 12%RH, 48hrs @100Volts
- Resistant to many chemicals commonly used in Industrial and OEM applications including oils, grease and cleaning solvents
- Proprietary nitrile blend offers enhanced flexibility, comfort and mobility ? reducing hand fatigue
- Black color effectively hides dirt
- Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves
- Complies with FDA food handling requirements 21 CFR, Part 177
-
Standard Shipping
$9.29
Features:
- Seamless knit shell is comfortable and flexible
- Knit Wrist helps prevent dirt and debris from entering the glove
- Double-sided PVC dots provide enhanced grip and extra cut and abrasion resistance
-
Standard Shipping
$101.19
Features:
- ATG 34-8743 features innovative fibres – we source our base ingredients to develop our own unique high performance yarns and fibres that offer cut protection whilst maintaining high levels of comfort.
- Reinforcement – between the thumb and forefinger, improves cut resistance and extends glove life in an inherently weak area.
- 360? breathability – patented micro-foam nitrile coating offers 360? breathability, making it the most breathable glove on the market today.
- Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves
- Form, fit and feel – mimics the “hand at rest”, reducing hand fatigue and increasing comfort.
- Latest knitting technology – utilized to produce smooth and rounded fingertips, improving fingertip sensitivity.
- Consistent liner penetration – from the nitrile, leaving only the soft liner resting against the skin.
- Optimized grip delivered through our micro-cup finish, allows for a controlled grip.
- All ingredients used in the manufacturing and construction of this product are compliant with the REACH legislation.
- This glove has been laundered prior to final packaging making it clean and safe for use.
- The Oeko-Tex? Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin.
- The Skin Health Alliance has awarded professional dermatological accreditation following review of the scientific dossier behind this product.
- Silicone Free
- Complies with FDA food handling requirements 21 CFR, Part 177
- This style is also available tri-folded and shrink-wrapped for carefree dispensing through vending machines (34-8743V)
-
Standard Shipping
$11.29
Features:
- Black color hides dirt and provides contrast for handling lighter color material
- Economical puncture resistance with great comfort, dexterity and tactile sensitivity
- Textured grip provides a good grip in wet or dry environments
- Contains no natural rubber latex proteins
- Ambidextrous for quick and easy donning
- Powder-Free for clean comfort and superior tactile sensitivity
- Made from component materials that comply with Federal Regulations for food contact, 21 CFR 177.2600
- Industry Grade – For non-medical use
Minimum order quantity: 10
Order in multiples of: 1
-
Standard Shipping
$26.99
Features:
- Rough finish styles provide economical enhanced wet grip and cut resistance
- Interlock lined for great dexterity, dries quickly and sheds little lint
- Black color hides dirt
- Single dip construction
- Knit Wrist helps prevent dirt and debris from entering the glove
-
Free Shipping
$212.99
Features
- Powerful 10.5 AMP motor delivers more output for increased performance
- Refined design at only 5.8 lbs. for reduced operator fatigue
- AC/DC switch for use with alternative power source
- Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life
- Externally accessible brushes for greater serviceability
-
Free Shipping
$227.37
Features
- Makita HY00000212 features Solid rubberized wheels for easy job site portability)
- Large rubberized handle for added control)
- Hooks for easy hose storage)
- For use with Makita 2.5 HP High Pressure Air Compressor model AC310H)
-
Standard Shipping
$99.10
Features
- 4″ swivel wheels, two with locking brake and two without
- Provides a lightweight and maneuverable means of transporting MAKPAC cases
- Practical way to move heavy Makita tools, accessories and more
- 220 lb. carrying capacity allows the cart to handle heavy loads
- Two handles to easily pick up and transport when not in use
- Two locking latches that secure MAKPAC cases to the cart for quick transportation
-
Standard Shipping
$152.50
Features
- Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
- Provides up to 65% more run time per charge compared to BL1830
- Reaches full charge in 45 minutes or less
- Compatible only with STAR Protection tools, indicated by the Star symbol™ and/or yellow battery receiver under the tool
-
$92.31
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$124.34
Features
- Certified welds for confidence in strength and loading
- Uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements to ensure optimal performance
- Diamond holes to provide temporary fastening
-
Standard Shipping
$28.99
Features
- (8) Rigid Tie RTC2Z connectors
- (100) Simpson Strong-Tie #8 x 1 1/4″ Wafer-Head screws
-
Free Shipping
$605.99
Features
- 13 Amp motor
- 9000 rpm no-load speed for applications with 6 in. grinder wheels
- Brake engages when trigger is released with stopping speeds of 1.5 seconds when using a standard grinding wheel (4-1/2 in. x 1/4 in. bonded abrasive wheel, non-hubbed)
- Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off
- E-CLUTCH® activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor
- Up to 30% more power vs the DCG414 Grinder
-
Special Order Shipping
$31.96
-
Special Order Shipping
$6.74
-
Special Order Shipping
$65.57
-
Special Order Shipping
$54.32
-
Special Order Shipping
$411.84
-
Special Order Shipping
$249.72
-
Special Order Shipping
$69.47
-
Oversized - Special Order
$231.14
24IN. 4C EDGER POWER TROWEL PAN
-
Oversized - Special Order
$39.26
1-3/4in PB INSERT HANDLE, 96in BLUE
Minimum order quantity: 3
Order in multiples of: 3
-
Special Order Shipping
$36.36
1-3/4in PB HANDLE, 96in BLUE
Minimum order quantity: 3
Order in multiples of: 3
-
Standard Shipping
$111.09
-
Special Order Shipping
$40.17
-
Special Order Shipping
$89.01
-
Special Order Shipping
$69.34
-
Special Order Shipping
$217.14
TEXTURE HEAVY SLATE TOUCH-UP 9in
-
Special Order Shipping
$7.72
-
Standard Shipping
$26.60
Features:
- An 18-element mixing nozzle for use with 22 oz. and 56 oz. epoxy adhesive cartridges
- This is a one-piece nozzle with integrated nut (separate retaining nut not required)
- Once the epoxy hardens in the nozzle it can be used as a cap to keep the product fresh
- Each nozzle is 14 in. long for use in all depths of holes
- Quantity: 5
-
Standard Shipping
$64.55
Features:
- Uses Strong-Drive screws, which allow for fast installation, reduced reveal and high capacity
- Provides a 1-in. standoff between post and concrete that meets code requirements
- Embeds in wet concrete at time of pour
- The standoff base reduces the potential for decay at post and column ends
- Shipped with base plate assembled
-
Special Order Shipping
$41.17
GREEN NYLON CONCRETE BROOM 36in
-
Free Shipping
$298.37
Angled with a unique safety equipped 34 degree magazine, the SuperFramer SN890CH3/34 is an ideal choice for a a variety of applications such as framing, seating, decking, sub flooring and furring. Hard to reach places and unconventional angles are a thing of the past for carpenters. This framing head stick nailer is equipped with a…
-
Free Shipping
$318.53
Designed with a 28 degree magazine, the safety equipped SuperFramer? SN883CH2/28 is an ideal choice for a variety of applications such as framing, sheathing, decking, sub flooring and furring. At 11-7/8″ the SN883RH3 is 30% shorter than conventional tools. Hard to reach places and unconventional angles are a thing of the past for carpenters. This…
-
Free Shipping
$335.30
The MAX CN80 is a safety equipped, lightweight yet heavy duty professional grade industrial coil nailer. Its die cast aluminum construction contributes to its lightweight. The CN80 is best used for industrial applications such as making pallets, crating, packaging, fences, decking, sheathing, furring, and siding.
-
Free Shipping
$279.30
Features:
-
Standard Shipping
$178.99
Features:
- Variable oscillation speed from 6000 to 20000 OPM
- Dial speed control is easy to adjust
- Large on/off slide switch with lock-on feature
- Weighs only 4.9 pounds
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
-
Standard Shipping
$49.99
Features
- CLC 1604 features 6 main nail and tool pockets
- 10 smaller pockets for pliers, pencils, nail sets, two-way radio, etc.
- Center pocket for tape, nails or other tools.
- 3″ wide padded belt with steel roller buckle
- Fits waist sizes: 29″– 46″
- Made of polyester fabric and ballistic binding
- Steel hammer holder
-
Standard Shipping
$10.49
Features
- Shell constructed from high density polyethylene materials
- Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hat
- Soft brow pad is replaceable
- Replaceable suspensions and headbands also available
