Showing 1–40 of 5551 resultsSorted by popularity
-
![TW1061T-USA [Roll]](https://cdn-ilckdfp.nitrocdn.com/IBDbyZVdqBMFHKDpbSEphfHVgqgYRGgX/assets/images/optimized/rev-bace6e3/www.heydensupply.com/wp-content/uploads/2020/11/TW1061T-1000x1000-1-600x600.jpg "TW1061T-USA [Roll]")
$289.88 Features:
- Full Case Containing 30 Rolls of Tie Wire
- Buy from an authorized Max USA Master Distributor
- Annealed steel wire – diameter 1.0mm
- For use with MAX RB441T TwinTier, RB611T, and RB401T-E TwinTier
-
$7.01 Features
- Radians RWG538 is made out of 18 gauge green High Performance Polyethylene (HPPE) provides cut resistance
- Black foam nitrile palm coating with PVC dots improves abrasion in wet or dry conditions
- Seamless cuff design provides a comfortable fit
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 3 4 1)
- Reinforced thumb crotch for more strength | ANSI Cut Level A2
-
$0.74 Features
- Super soft Jelli Snug Plugs are washable and reusable
- FDA approved materials are non-toxic
- This product is made in the USA
- Available with or without nylon cord
- NRR 28 dB
-
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- Spacing: 6 x 6
- W/D Designation: W2.9/W2.9
- Gauge: 6/6
- Weight: 42LBS
-
$5.78 Features
- HPPE outer shell with fiberglass
- Black foam nitrile coated palm
- Seamless cuff design
- Load weight of 1510g
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 5 4 4)
-
Features
- RWG701 is ANSI Cut Level A4
- Free of Fiberglass or Stainless Steel
- EN388:4X43D
-
$0.94 Features:
- LU-series hangers are tested, load rated and code compliant
- The LU series installs using several fastener selections with tested allowable loads
- Precision-formed engineered for installation ease and design value
- Seat width: 1-9/16 in.
- Nominal joist size: 2×8, 2×10
-
$4.07 Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 20-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
$0.52 Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
$3.85 Features:
- 2-Ply, 20 Oz. 100% Cotton Boss Cord?
- Clute Cut Design
- Rubberized, Water Resistant Safety Cuff
- Straight Thumb
-
$1.29 Features:
- High-Vis Polyester Shell for Comfort & Hand Awareness
- Black, Smooth Coated Nitrile Palm Dip Hides Dirt
- Good Abrasion & Light Oil Resistance
- Knit Wrist
Minimum order quantity: 12
Order in multiples of: 12
-
$3.77 TURTLE BACK SPONGE
Minimum order quantity: 24
Order in multiples of: 24
-
$5.19 Features
- The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
- May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
- May be sloped up from 0° to 45°.
- Can be installed using nails or Strong-Drive SD Connector screws.
-
$0.66 Features
- Super soft Jelli Snug Plugs are washable and reusable
- FDA approved materials are non-toxic
- This product is made in the USA
- Flip-top case conveniently stores plugs
- Custom imprinting available on case top
-
$0.65 Features:
- Embossments in bend line strengthen connection
- H2.5AZ top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
-
$7.10 Features
- Touchscreen Capabilities in all fingers
- 18 gauge gray High Performance Polyethylene (HPPE) shell with Stainless Steel provides cut resistance
- Black PU palm coating provides protection from abrasion in wet or dry conditions
- Seamless design provides a comfortable fit|ANSI Cut Level A5
- ANSI Abrasion Level 3
-
![TW1061T-USA [Roll]](data:image/svg+xml;nitro-empty-id=MTQ0NDoyNzky-1;base64,PHN2ZyB2aWV3Qm94PSIwIDAgNjAwIDYwMCIgd2lkdGg9IjYwMCIgaGVpZ2h0PSI2MDAiIHhtbG5zPSJodHRwOi8vd3d3LnczLm9yZy8yMDAwL3N2ZyI+PC9zdmc+ "TW1061T-USA [Roll]")
$370.85 Features:
- Wire steel is melted, annealed, and drawn in the U.S.A
- Steel mill certification available
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
Features:
- 18 Mil Natural Latex
- Crinkled Latex Grip
- 13″ Rolled Cuff
-
$18.00 Features
- AT3G10 offers excellent for use in cold weather conditions or applications where fast cure is required
- Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
- Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
- Base material installation temperatures down to 0°F (-18°C)
- Use in grout-filled CMU construction
-
$2.90 – $3.24 Features
- Crossfire 24Seven ultra Lightweight, Single Lens Design for additional coverage
- Flexible Temples for all day comfort
- The Crossfire 24Seven hard coat polycarbonate lens protects against scratches
- Provides 99.9% UVA and UVB protection
- Complies with ANSI Z87.1 standards
-
$25.99 Features:
- 8in Wide by 18 Inches Long
- Bar Mount On 48 Inch Power Trowel Machines
- Box of 4 Trowel Blades
- Longest Lasting Silver Blades
-
$4.19 Features:
- Breathable Cotton Back
- Clute Cut Design
- Rubberized Safety Cuff
- Straight Thumb
- 2-Ply Quilted Palm
-
-
$13.98 Features
- Radians QHR6 meets ANSI Z89.1 Type 1 Class G & E Standards
- Made in the USA
- Full Brim
- 6 Point Ratchet Suspension
- Pillowed Brow Pad
- 14% OFF
$12.90 Original price was: $12.90.$11.05Current price is: $11.05. Features
- Every other tooth is ground thinner for fast cuts
- Thicker plate design for improved tracking
- Reinforced shoulder for durability and impact resistance
- Body slots dissipate heat for long blade life
Minimum order quantity: 10
Order in multiples of: 10
-
-
$1.13 Features:
- Anchors mudsill to concrete block, poured walls or slab foundations
- Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
$22.61 FINISHING TROWEL
Minimum order quantity: 4
Order in multiples of: 4
-
$72.37 GREEN NYLON CONCRETE BROOM 48in
-
$5.06 Features
- 13 gauge knitted HPPE hi-vis green outer shell with fiberglass and stainless steel
- RWG558 features black polyurethane coated palm
- Load weight of 5045g
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, Puncture, TDM-100 (4 X 4 3 F)
-
$5.93 Features
- Split Cow Hide leather Fingers
- Palm Overlay
- Short Slip-on Cuff
- Lightweight
- Breathable Spandex
-
$3.86 Features
- RWG560 13 gauge HPPE gray outer shell with fiberglass
- Black polyurethane coated palm
- Load weight of 1995g
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture (4 5 4 3)
RWG560 Flyer
-
$10.99 Features
- Tough genuine gold pig grain leather palm
- Reinforced split pigskin leather palm patch for extra durability
- Breathable spandex back provides ultimate comfort and fit
- Extra foam added to knuckle area for light bump protection
- Wing thumb increases comfort in open-handed work
-
$1.79 Features
- Blue polyester/cotton jersey
- Knit Wrist helps prevent dirt and debris from entering the glove
- Clute cut provides a roomy fit
- Straight thumb increases comfort in closed-fisted work
- Medium weight provides comfort for light duty hand protection
-
$3.79 Features:
- Clute Cut Design
- Double Woven, 18 oz. Fleece-Out Cotton
- Knit Wrist
- Straight Thumb
-
![TW1061T-EG [Roll]](data:image/svg+xml;nitro-empty-id=MTczMzo3NDg=-1;base64,PHN2ZyB2aWV3Qm94PSIwIDAgMzQ2IDMxMCIgd2lkdGg9IjM0NiIgaGVpZ2h0PSIzMTAiIHhtbG5zPSJodHRwOi8vd3d3LnczLm9yZy8yMDAwL3N2ZyI+PC9zdmc+)
![TW1061T-USA [Roll]](data:image/svg+xml;nitro-empty-id=MTczMzoyMzA0-1;base64,PHN2ZyB2aWV3Qm94PSIwIDAgNjAwIDYwMCIgd2lkdGg9IjYwMCIgaGVpZ2h0PSI2MDAiIHhtbG5zPSJodHRwOi8vd3d3LnczLm9yZy8yMDAwL3N2ZyI+PC9zdmc+ "TW1061T-USA [Roll]")
$366.10 Features:
- Galvanized Wire Resists Rust and Corrosion
- Steel mill certification available
- 19 Guage Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
$10.99 Features:
- Aluminum oxide grain
- Designed for all ferrous metals
- A free cutting wheel with exceptional cut rate and very good life
- Triple-reinforced for stability and safety
-
Features
- 50% taller (13mm) segments are designed for longer life and faster cutting
- Up to 4x longer life than competitive blades
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 30% smoother cutting than segmented blades
- Carefully tensioned for less vibration and a superior user experience
- Strict quality control measures ensure superior performance
- Dry or wet cutting for added versatility
-
$2.13 Features:
- Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
- Loads have been increased for wind and seismic forces
- Floor-to-floor clear span application
- For use on the edge of 2x members
- Length: 24 in.
