Simpson Strong-Tie WA62812MG Wedge-All 5/8 in. x 8-1/2 in. Mechanically Galvanized Expansion Anchor

The Wedge-All wedge-style expansion anchor is intended for use in solid concrete or grout-filled masonry. This anchor is best suited in installations where a building code approval for seismic and cracked/uncracked concrete is not required. Threaded studs are set by tightening the nut to the specified torque.

Warranty

Limited warranty, available at www.strongtie.com/limited-warranties.

Specifications
Assembled Width (in)	1.312
Assembled Height (in)	8.563
Assembled Depth (in)	1.312
Package Quantity	1
Coating	Mechanically Galvanized
Material	Carbon Steel
Color	None
Length (in)	8 1/2
Thread Length	6
Diameter (in)	8-May
Drill Bit Diameter (in)	8-May
Anchor Body Component Material	Material meets minimum 70,000 psi tensile strength
Clip Component Material	Carbon Steel
Nut Component Material	Carbon Steel ASTM A 563, Grade A
Washer Component Material	Carbon Steel
Minimum Fixture Hole Diameter (in)	16-Nov
Wrench Size (in)	15/16
ICC-ES Reports	ESR-1396 (Masonry)
State Of Florida Approvals	FL15730
FM Approval	FMExpanShield|FMExpanShield
UL Approval	VFXT.EX3605|VFXT.EX3605
Hazmat	NO
UPC Per Each	44315205903
Package Quantity	20
Carton Quantity	40
Carton UPC	20044300000000
Pallet Quantity	4320
Pallet UPC	50044300000000

Related

[Pack of 50] DeWalt 7416SD1-PWR 3/8 X 5 Power-Stud Plus SD1 Wedge Expansion Anchor

Features Consistent performance in high and low strength concrete Nominal drill bit size is the same as the anchor diameter Anchor can be installed through standard fixture holes Length ID code and identifying marking stamped on head of each anchor Anchor design allows for follow-up expansion after setting under tensile…

[Pack of 25] DeWalt 7426SD1-PWR 1/2 X 7 Power-Stud Plus SD1 Wedge Expansion Anchor

Features Consistent performance in high and low strength concrete Nominal drill bit size is the same as the anchor diameter Anchor can be installed through standard fixture holes Length ID code and identifying marking stamped on head of each anchor Anchor design allows for follow-up expansion after setting under tensile…

[Pack of 50] DeWalt 7410SD1-PWR 3/8 X 2-1/4 Power-Stud Plus SD1 Wedge Expansion Anchor

Features Consistent performance in high and low strength concrete Nominal drill bit size is the same as the anchor diameter Anchor can be installed through standard fixture holes Length ID code and identifying marking stamped on head of each anchor Anchor design allows for follow-up expansion after setting under tensile…