Simpson Strong-Tie DIABST50-SDS SDS-plus Setting Tool for 1/2-in. Rod DIAB Drop-In Anchor

The drop-in anchor setting tool is designed for properly and consistently installing Simpson Strong-Tie Drop-In internally threaded anchors. Using the setting tool, drop-ins are installed by driving the expander plug toward the bottom of the anchor until the shoulder of the setting tool makes contact with the top of the anchor.

• Caution: Oversized holes will make it difficult to set the anchor and will reduce the anchor?s load capacity

Warranty

Limited warranty, available at www.strongtie.com/limited-warranties.

Related

Simpson Strong-Tie DIABST50 Setting Tool for 1/2-in. Rod DIAB Drop-In Anchor

Features: Setting tool for DIAB anchors For use with Simpson Strong-Tie Drop-In models DIAB50, DIABL50, and DIAB50C Sets drop-ins for overhead applications Drop-in anchors are sold separately Made from carbon steel  

Simpson Strong-Tie DIAB50 DIAB Drop-In Internally Threaded Anchor for 1/2-in. Rod

Features:Faster installation than previous drop-in anchor design sets with 40% fewer hammer hitsPositive-set marking system indicates when anchor is properly setZinc-plated carbon steelLength: 2 in.Drill bit diameter: 5/8 in.Minimum order quantity: 50Order in multiples of: 50

Simpson Strong-Tie MASB 16-Gauge Galvanized Masonry Mudsill Anchor

Features: Anchors mudsill to concrete block, poured walls or slab foundations Fill CMU cell with concrete grout first, then place MASB into the grouted cell and adjust into position Attach mudsill to anchor only after the concrete grout cures Nominal sill size: 2x4, 2x6 Made from 16-gauge steel Mudsill Anchors