Showing 81–120 of 178 resultsSorted by popularity
-
Standard Shipping
$24.49Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$50.79Simpson Strong-Tie APB1010DSP Decorative Post Base Side Plate Outdoor Accents decorative side plates attach to the bottom of a post or column to provide a finished look to an installed post base. They are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These decorative side plates provide a black powder…
-
Standard Shipping
$155.89Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$6.79Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
-
Standard Shipping
$10.89Features
- Install with Outdoor Accents structural screws and hex-head washers (sold separately) for a decorative look
- ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
-
Standard Shipping
$6.79Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
-
Standard Shipping
$6.79Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Installs with the Outdoor Accents structural screw and hex-head washer (fasteners sold separately)
-
Standard Shipping
$24.49Simpson Strong-Tie APB66DSP Decorative Post Base Side Plate Outdoor Accents decorative side plates attach to the bottom of a post or column to provide a finished look to an installed post base. They are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These decorative side plates provide a black powder…
-
Standard Shipping
$6.79Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
-
Standard Shipping
$2.39Features
- Ideal for gates, fences or any project where a 90° connection is needed
- APRTA12 fastens with #8 x 3/4″ screws (not included); APRTA2 fastens with Simpson Strong-Tie® Outdoor Accents 1 1/2″ connector screws (not included)
- Provides a strong 90° connection without 45° cuts or angled fastening
-
Standard Shipping
$2.69Features
- ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
-
Standard Shipping
$6.79Features
- Adds decorative flair to any outdoor living project
- Installs with the Outdoor Accents structural screw and hex-head washer (fasteners sold separately)
- Sized to fit 4x and 6x lumber
-
Standard Shipping
$5.59APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw.
-
Standard Shipping
$9.49The deck joist tie attaches 2x joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and hex-head washer for the look of a bolted connection.
-
$9.49Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
-
Standard Shipping
$9.49The Simpson Strong-Tie® Outdoor Accents line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The deck joist tie attaches 2x joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and hex-head washer for…
-
Standard Shipping
$1.99Outdoor Accents angles tie together beams, rafters and more. The APA angle makes structural connections between beams and posts much more visually appealing. These angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects.
-
Standard Shipping
$24.49Simpson Strong-Tie APVB66DSP Decorative Post Base Side Plate The Simpson Strong-Tie® Outdoor Accents line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The Avant Collection features straighter edges for a clean, timeless design. These decorative side plates attach to the bottom of a post or column…
-
Standard Shipping
$6.79The deck joist tie attaches 2x joists to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and hex-head washer for the look of a bolted connection.
-
Standard Shipping
$95.59Outdoor Accents gable plates add decorative appeal and strength to any outdoor living space. They provide reinforcement for a connection from a wood beam to three angled wood braces. Three sizes are available: 6:12 pitch, 8:12 pitch and 12:12 pitch. Gable plates are easily installed with Outdoor Accents structural screws and hex-head washers.
-
Standard Shipping
$24.49Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$9.49Features
- Adds decorative flair to any outdoor living project
- Installs with the Outdoor Accents structural screw and hex-head washer (fasteners sold separately)
- Sized to fit 4x and 6x lumber
-
Standard Shipping
$15.99Features
- Opposing flanges provide increased lateral resistance
- Double-shear nailing for optimal strength
- Sized specifically for multi-2x widths
-
Standard Shipping
$40.29Features
- 14 gauge
- ZMAX galvanized with black powder coat
-
Standard Shipping
$1.45Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested, load rated and code compliant
-
Standard Shipping
$132.72Features:
- Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
- Less installation torque also means less wear on tools
- Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
- WSV screws can be easily backed out, allowing for future access to floor cavities
-
Standard Shipping
$13.95Features:
- Provides a positive connection for a post to a wood deck
- Stronger than angled nailing or screw fastening
- Reduces the chance of the post splitting and eliminates nailing into end grain
- Not recommended for non top-supported installations (such as fences or unbraced carports)
- Nominal post size: 4×6
-
Standard Shipping
$4.20Features:
- A versatile, heavy-duty strap for a variety of connections and splices where extra strength is needed
- Straight lines and chamfered edges offer a better appearance
- Provides support in home repair and construction projects
- Easy nailing pattern for connecting the sides of 2x members
- Width: 1-3/8 in.
-
Standard Shipping
$13.41Features:
- SUL = skewed left
- Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
- These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
- Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
- Nominal joist size: 2×6 or 2×8
-
Free Shipping
$308.77Features:
- Flat head
- Unique box thread design with raised-ridge technology greatly reduces driving torque
- Specially designed sharp point penetrates hard wood products with ease
- 6-lobe drive helps prevent driver-bit cam-out while driving easier and extending bit life (replacement bit BITTX25)
- Length: 3 in.
-
Standard Shipping
$2.39Features:
- Anchors mudsill to concrete block, poured walls or slab foundations
- Fill CMU cell with concrete grout first, then place MASB into the grouted cell and adjust into position
- Attach mudsill to anchor only after the concrete grout cures
- Nominal sill size: 2×4, 2×6
- Made from 16-gauge steel
-
Standard Shipping
$32.01Features:
- Ideal for retrofit or new construction projects
- Can be installed with cast-in-place or post-installed anchor bolts
- Four-ply formed steel provides increased tension capacity
- Anchor bolt washers not required
- 2-1/2 in. width x 16 in. length
-
Standard Shipping
$1.89Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×8 and 2×10
-
Standard Shipping
$17.17Features:
- The minimum effective shank length must equal or exceed the sum of the thickness of the attached material and the minimum embedment depth
- Code listed per ICC-ES ESR-2138, Florida FL15730 and LA RR25469
- Compatible with Simpson Strong-Tie powder-actuated tool systems as well as other common tools
- .300-in. head diameter / .157-in. shank diameter
- 1-in. washer
-
Standard Shipping
$3.03Features:
- LUC-series hangers are tested, load rated and code compliant
- The LUC series installs using several fastener selections with tested allowable loads
- Suitable for nominal 2×10 and 2×12 lumber
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
Free Shipping
$189.99Features:
- Redesigned tip and thread pattern provides easy starts and up to 25% less torque while driving makes for up to 20% faster driving
- Less installation torque also means less wear on tools
- Deep 6-lobed recessed ribbed head provides clean countersinking and more secure bit retention for fewer cam-outs
- The holding power of WSV screws reduces the gaps between the joist and subfloor that cause floor squeaks
- WSV screws can be easily backed out, allowing for future access to floor cavities
-
Standard Shipping
$4.09Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 5/8 in.
- Length: 6 in.
- Made from mechanically galvanized carbon steel
-
Standard Shipping
$1.35Features:
- Load-rated, precut strap designed for quick installation and optimal performance
- Designed to resist wind and seismic forces
- Floor-to-floor clear span application
- Width: 1-1/4 in.
- Length: 18 in.
-
Standard Shipping
$77.26Features:
- SDS screws are supplied with the holdowns to ensure proper fasteners are used
- No stud bolts to countersink at openings
- Height: 14 in.
- Made from 7-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$1.99Features:
- Holds the rafter or truss on both sides for high lateral load resistance
- Used for a variety of connections where one member crosses another
- Can be installed on inside or outside of wall, or both sides
- Can be installed with flanges facing either inward or outward
- Made from 18-gauge steel
![BCS2-3[6Z]](https://www.heydensupply.com/wp-content/uploads/2023/01/872d25a7023135625e1d597aeef47f156670f1aa-600x600.jpg)
![ALPH24[100PCK]](https://www.heydensupply.com/wp-content/uploads/2023/01/90ec33b43f7cfeea2805b3a4cefaa11c56780597-600x600.jpg)
