Showing 1–40 of 64 resultsSorted by popularity
-
Standard Shipping
$0.94
Features:
- LU-series hangers are tested, load rated and code compliant
- The LU series installs using several fastener selections with tested allowable loads
- Precision-formed engineered for installation ease and design value
- Seat width: 1-9/16 in.
- Nominal joist size: 2×8, 2×10
-
Standard Shipping
$4.07
Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 20-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
Standard Shipping
$0.52
Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$0.65
Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
Standard Shipping
$1.22
Features:
- Can be used to make a connection to either the top or bottom plate
- Embossment in the angle reinforces the plate
- Sill plate installation: fill all round holes
- Width: 1-3/8 in.
- Height: 6-11/16 in.
-
Standard Shipping
$21.83
Features:
- Minimum concrete edge distance is 5 in.
- Minimum concrete block left-to-right edge distance is 20 in.
- Length: 51 in.
- For additional length, an MST strap can be attached using 1/2- bolts through existing holes
- Made from 12-gauge steel
-
Standard Shipping
$3.81
Features:
- Available with the bend reversed
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Versatile with many lengths offered to fit the specific application
- Length: 24 in.
- Made from 14-gauge steel
-
Standard Shipping
$6.09
Features:
- Designed to help resist download forces
- The unique two-level embossment provides added stiffness to the top flange
- Quick installation
- Nominal joist size: 2×6
- Made from 14-gauge steel
-
Free Shipping
$243.85
Features:
- Tabs inside the MPBZ provide the code-required 1 in. post standoff to help prevent rot from standing water and ground moisture
- Stamped indicators and internal tabs identify the required concrete embedment depth
- Strategically placed holes simplify installation to allow template attachment
- Optional obround holes have been added for attaching trim material
- Additional holes at the embedment line allow standing water to exit and a point of visual inspection
-
Standard Shipping
$46.31
Features:
- Increased uplift resistance for wind or seismic loading
- Bolt hole locations meet code-required spacing for optimal capacity
- Nominal column size: 6×6
- Made from 7-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$3.00
Features:
- Replaces additional framing and toe-nailing
- Suitable for most installations on nominal 2×10 or 2×12 header/rim board
- May be installed flush with the top of the carrying member or lower on the face
- Interchangeable for left or right applications
- Made from 18-gauge steel
-
Standard Shipping
$124.29
Features
- Certified welds for confidence in strength and loading
- Uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements to ensure optimal performance
- Diamond holes to provide temporary fastening
-
Standard Shipping
$20.79
Features:
- The nailing pattern allows for nailing to the edges of double 2x’s
- Strap nail slots are countersunk to provide a lower nail head profile
- The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
- Standard strap length: 24-5/8 in.
- Made from 12-gauge steel
-
Standard Shipping
$1.66
Features:
- Embossment feature provides strength at the bend
- Features optional diamond holes of various uplift capacities with min./max. nailing configurations
- Can be installed before or after placement of wall
- Width: 1-1/2 in.
- Length: 7-7/8 in.
-
Standard Shipping
$64.55
Features:
- Uses Strong-Drive screws, which allow for fast installation, reduced reveal and high capacity
- Provides a 1-in. standoff between post and concrete that meets code requirements
- Embeds in wet concrete at time of pour
- The standoff base reduces the potential for decay at post and column ends
- Shipped with base plate assembled
-
Standard Shipping
$7.69
Features:
- Features double-shear nailing which distributes the load through two points on each joist nail for greater strength
- Allows for the use of fewer nails, faster installation, and the use of standard nails for all connections
- Do not bend or remove tabs
- Nominal joist size: 4×8
- Made from 14-gauge steel
-
Standard Shipping
$29.10
Features:
- Extra optional triangle holes for additional load
- HUC-series hangers are tested, load rated and code compliant
- Install wood joists to wood, masonry and concrete
- Seat width: 3-1/8 in.
- Nominal joist Size: Double 2×10
-
Standard Shipping
$5.79
Features:
- Extra-long straps for height adjustability and top-flange installation
- Zinc Galvanized, G90 Finish
- Top-flange or face-mount installation
-
Standard Shipping
$12.27
Features
- Opposing flanges provide increased lateral resistance
- Attains full allowable load using either common nail or pneumatic nail sizes
- Light-gauge material designed for light-duty applications
-
Standard Shipping
$41.19
Features
- Preinstallation of brackets allows rails to slide into place easily
- Eliminates need for toe nails or screws
-
Standard Shipping
$13.95
Features:
- Provides a positive connection for a post to a wood deck
- Stronger than angled nailing or screw fastening
- Reduces the chance of the post splitting and eliminates nailing into end grain
- Not recommended for non top-supported installations (such as fences or unbraced carports)
- Nominal post size: 4×6
-
Standard Shipping
$4.20
Features:
- A versatile, heavy-duty strap for a variety of connections and splices where extra strength is needed
- Straight lines and chamfered edges offer a better appearance
- Provides support in home repair and construction projects
- Easy nailing pattern for connecting the sides of 2x members
- Width: 1-3/8 in.
-
Standard Shipping
$13.41
Features:
- SUL = skewed left
- Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
- These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
- Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
- Nominal joist size: 2×6 or 2×8
-
Standard Shipping
$32.01
Features:
- Ideal for retrofit or new construction projects
- Can be installed with cast-in-place or post-installed anchor bolts
- Four-ply formed steel provides increased tension capacity
- Anchor bolt washers not required
- 2-1/2 in. width x 16 in. length
-
Standard Shipping
$1.89
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×8 and 2×10
-
Standard Shipping
$3.03
Features:
- LUC-series hangers are tested, load rated and code compliant
- The LUC series installs using several fastener selections with tested allowable loads
- Suitable for nominal 2×10 and 2×12 lumber
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
Standard Shipping
$1.35
Features:
- Load-rated, precut strap designed for quick installation and optimal performance
- Designed to resist wind and seismic forces
- Floor-to-floor clear span application
- Width: 1-1/4 in.
- Length: 18 in.
-
Standard Shipping
$77.26
Features:
- SDS screws are supplied with the holdowns to ensure proper fasteners are used
- No stud bolts to countersink at openings
- Height: 14 in.
- Made from 7-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$1.99
Features:
- Holds the rafter or truss on both sides for high lateral load resistance
- Used for a variety of connections where one member crosses another
- Can be installed on inside or outside of wall, or both sides
- Can be installed with flanges facing either inward or outward
- Made from 18-gauge steel
-
Standard Shipping
$2.29
Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 12-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
Standard Shipping
$13.49
Features:
- Suitable for retrofit applications
- The embossments add stiffness in crucial areas for improved performance
- Simple to install and can be installed on the inside or outside of the wall
- Load rated to resist high-wind forces
- 2-ply
-
Standard Shipping
$53.96
Features:
- Attaches a post to existing concrete for decks, patio covers and other top-supported structures
- Features 1-in. standoff to help prevent rot at post end
- Slotted for adjustability
- Designed for versatility, cost-effectiveness and maximum uplift performance
- Nominal post size: 6×6
-
Standard Shipping
$2.41
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: 2×10, 2×12, 2×14
-
Standard Shipping
$4.42
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: Double 2×10 and Double 2×12
-
Standard Shipping
$30.43
Features:
- Provides a positive connection for a post to a wood deck
- Stronger than angled nailing or screw fastening
- Reduces the chance of the post splitting and eliminates nailing into end grain
- Not recommended for non top-supported installations (such as fences or unbraced carports)
- Nominal post size: 6x
-
Standard Shipping
$8.12
Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: Triple 2×8 and Triple 2×10
-
Standard Shipping
$0.74
Features:
- MP24 is versatile and easy-to-use mending plate for wood-to-wood connections
- These non-structural connectors are ideal for general fix-up work
- Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
- Used for non-structural applications only (not for truss applications)
- Width: 2 in.
-
Standard Shipping
$53.96
Features:
- Extra optional triangle holes for additional load
- HUC-series hangers are tested, load rated and code compliant
- Install wood joists to wood, masonry and concrete
- Seat width: 4-11/16 in.
- Nominal joist size: Triple 2×10
-
Standard Shipping
$46.82
Features:
- Attaches a post to existing concrete for decks, patio covers and other top-supported structures
- Features 1-in. standoff to help prevent rot at post end
- Slotted for adjustability
- Designed for versatility, cost-effectiveness and maximum uplift performance
- Nominal post size: 4×6
-
Standard Shipping
$26.71
Features:
- The nailing pattern allows for nailing to the edges of double 2x’s
- Strap nail slots are countersunk to provide a lower nail head profile
- The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
- Standard strap length: 26-1/8 in.
- Made from 12-gauge steel
