tilt up slant anchor

Slant Anchor Installation Guidelines:

1. Position and secure the Slant Anchor before casting panel.
2. Erect panel, brace and install bearing grout as required.
3. Locate and remove foam Void Former from connection face.
4. Drill 1” diameter hole into the foundation using the sleeve as a guide.
5. Remove dust from hole using compressed air, vacuum and/or bottle brush.
6. Mix Flowable Grout and pour into the connection cavity until half full.
7. Place Ductile Bar into sleeve and foundation immediately after grouting.
8. Add additional grout to cover the bar and fill the cavity.
9. Allow grout to cure before patching/finishing the panel face.

Get Your Tilt Up Project Quoted