Showing 41–80 of 130 resultsSorted by popularity
-
Standard Shipping
$66.77Features
- Polished chrome vanadium finish for corrosion resistance
- DirectTorque technology allows for greater contact with the flat surface area of fasteners
- Knurled control ring for improved grip
- Hard stamped markings for increased durability and readability
-
Free Shipping
$202.99Features
- DW08302CG features a Green beam for increased visibility
- 120 ft. range
- 1/8 in. accuracy at 30 ft.
- Water and debris resistant with an IP54 rating
- 1 meter drop rating
-
Standard Shipping
$62.80Features
- Pins for Concrete and Concrete Masonry (CMU)
- Gas Fasteners
- Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
- Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, CMU block and steel
-
Standard Shipping
$13.99DeWalt 08288-PWR 1 In. Wire Brush for Ansi Hole No. 7 Rebar
-
Standard Shipping
$22.99DeWalt 08287-PWR Wire Brush for 7/8 In. Ansi Hole No. 6 Rebar
-
Standard Shipping
$26.99DeWalt 08282-PWR 12″ Brush Extension
-
Standard Shipping
$33.75Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$26.05Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$42.35Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$34.49Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$36.99Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$26.65Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$23.35Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$24.50Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$17.79Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$16.99Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$22.35Features
- Structural connections, i.e., bean and column anchorage
- Safety related attachments
- Interior applications / low level corrosion environment
- Tension zone applications, i.e., cable trays and strut, pipe supports, fire sprinklers
- Seismic and wind loading
-
Standard Shipping
$12.99Features
- General purpose anchoring
- 02820-PWR installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
-
Standard Shipping
$10.99Features
- General purpose anchoring
- 02814-PWR installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
-
Standard Shipping
$47.96Features
- 03797-PWR offer a Pre-expanded anchor design which allows for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
Standard Shipping
$25.59Features
- 05523-PWR offers a pre-expanded anchor design allowing for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
-
Standard Shipping
$59.99Features
- 03794-PWR offers a pre-expanded anchor design, which allows for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
Standard Shipping
$19.15Features
- DFM12724B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
Standard Shipping
$14.20Features
- DFM12722B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
Standard Shipping
$22.80Features
- DFM12726B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
Standard Shipping
$19.95Features
- DFM12728B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
Standard Shipping
$18.99Features
- DFM12728 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Standard Shipping
$14.49Features
- DFM12720B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Standard Shipping
$10.99Features
- DFM12720 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
Standard Shipping
$15.07Features
- Durable Tough Thread
- Water Resistant
- Oil Resistant
- Double Palm Overlay
- Non-slip Grip
-
Special Order Shipping
$1,030.99Features
- FAST DRILLING IN CONCRETE with 4.5 J of impact energy
- System reduces vibration felt by the user at the handles comparted to rotary hammers without this feature
- System shuts down the tool in bind up situations
- when paired with DWH200D shroud and DCV585 dust extractor
- to quickly switch between drilling, hammer drilling, and chipping applications
-
Special Order Shipping
$1,395.99Features
- RAPID DRILLING AND CHIPPING in hard concrete with 13.3 J of impact energy
- MAINTAIN SPEED UNDER HEAVY LOADS with constant speed electronics
- EFFICIENT PERFORMANCE AND RUNTIME with brushless motor and German-engineered mechanism
- PRO-GRADE VERSATILITY: Tackle horizontal and downward drilling for #6 – #9 rebar dowel applications, dry coring up to 5 in., chipping in any lower-to-mid wall, bushing, and ground rod driving
- REDUCED VIBRATION FOR COMFORTABLE GRIP with SHOCKS™ Active Vibration Control®
-
Special Order Shipping
$363.99Features
- Up to 22% More Power vs. PorterCable® Corded Belted Sander (352VS): Ability to complete applications that of a corded sander
- Up to 95% Dust Collection Efficiency : DEWALT AirLock compatible dust collection designed to minimize dust exposure to user and workspace
- Variable Speed Trigger w/Lock On 25-Speed Selection Dial: Allows for control on various sanding applications
- Over- Molded Auxiliary Handle: Allows for two-handed operation and grip for scribing applications
- Quick Release Belt Change: Quick release system allows sand paper to be changed easily
-
Special Order Shipping
$545.99Features
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
-
Special Order Shipping
$545.99Features
- Micro nose improves line of sight and accuracy of nail placement
- Brushless motor maximizes runtime and durability
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
-
Special Order Shipping
$1,005.99Features
- Gas-free operation eliminates the need for fuel cells and provides a consistent, powerful alternative that operates on the DEWALT 20V MAX battery platform
- Variable power settings allow for pin depth adjustment and substrate versatility
- Field-serviceable driver blade reduces downtime of tool
- Comparable application speed to gas concrete nailers
- Dual LED worklights help illuminate work surface and provide onboard diagnostics
-
Special Order Shipping
$423.99Features
- 1- 1/8″ diameter vibrator delivers maximum consolidation power.
- 4 foot long flexible shaft for easy use and long reach.
- 14,000 VPM (under load) delivers maximum consolidation efficiency.
-
Special Order Shipping
$605.99Features
- 1 – 1/8″ diameter vibrator delivers maximum consolidation power.
- 4 foot long flexible shaft for easy use and long reach.
- 14,000 VPM [under load] delivers maximum consolidation efficiency.
-
Special Order Shipping
$448.99Features
- Dewalt DCN680D1 is 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
