Showing 1–40 of 410 resultsSorted by popularity
-
Standard Shipping
$0.94Features:
- LU-series hangers are tested, load rated and code compliant
- The LU series installs using several fastener selections with tested allowable loads
- Precision-formed engineered for installation ease and design value
- Seat width: 1-9/16 in.
- Nominal joist size: 2×8, 2×10
-
Standard Shipping
$4.07Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 20-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
Standard Shipping
$0.52Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$0.65Features:
- Embossments in bend line strengthen connection
- The top flange features an arrow line indicator to aid correct installation
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
Standard Shipping
$5.19Features
- The LRU26Z features an open design and ability to field-adjust the slope, ideal for both retrofit or new applications.
- May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
- May be sloped up from 0° to 45°.
- For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam (see “Max. C1” dimension in Standard Installation table).
- Can be installed using nails or Strong-Drive SD Connector screws.
ICC-ES Evaluation Report
-
Standard Shipping
$3.39Features
- 14 gauge
- ZMAX galvanized with black powder coat
-
Standard Shipping
$1.13Features:
- Anchors mudsill to concrete block, poured walls or slab foundations
- Nominal sill size: 2×4, 2×6, 2×8, 2×10, 2×12
- Made from 18-gauge steel
- ZMAX galvanization offers extra corrosion resistance for exterior and treated-wood applications
-
Standard Shipping
$18.00Features
- AT3G10 offers excellent for use in cold weather conditions or applications where fast cure is required
- Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
- Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
- Base material installation temperatures down to 0°F (-18°C)
- Use in grout-filled CMU construction
-
Standard Shipping
$4.09APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw
-
Standard Shipping
$4.09APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw.
-
Standard Shipping
$29.10This item has been DISCONTINUED.
-
Standard Shipping
$38.59This item has been DISCONTINUED.
-
Standard Shipping
$3.59Features
- Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie “≠” symbol for easy inspection after installation. The cap also prevents adhesive from running out the front of the screen tube.
- Flanges: Prevent the screen tube from slipping into over-drilled holes. Allow screen tube to function in holes that are drilled too deep.
- Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out the screen tube behind the face shell of hollow block applications. The extra “collar” of adhesive increases bearing area and results in higher load capacities in hollow concrete block.
- Color-Coded, Formula-Specific Mesh: The openings between the woven mesh screen tube strands are sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod.
-
Standard Shipping
$1.08Features
- Cannot be modified
- Works for a wide range of applications
- Features speed prongs used to temporarily position and secure the connector for easier and faster installation
- LUS-series hangers are tested, load rated and code compliant
-
Standard Shipping
$31.49Features
- Can be used where quick-to-install posts are needed, including fencing and mailbox applications
- Black powder-coated steel construction for reliable strength and decorative finish
- Approved for installation with the Strong-Drive® SDS Connector screw
-
Standard Shipping
$52.79Features:
- Exceptional performance superior bond-strength values at long-term elevated temperature of 110 degreeF (43 degreeC) using optimized drill bit diameters
- Tested and assessed in accordance with ICC-ES AC308 and ACI 355.4 for use in cracked and uncracked normal-weight and lightweight concrete
- Design flexibility can be specified for dry or water-saturated conditions when temperatures range from -40 degreeF (-40 degreeC) to 176 degreeF (80 degreeC)
- Jobsite versatility can be installed in dry, water-saturated or water-filled holes in base materials with temperatures between 40 degreeF (4 degreeC) and 100 degreeF (38 degreeC)
- Maximized production and safety qualified for installation using the Speed Clean? DXS dust extraction drilling system as an alternative to the conventional blow-brush-blow hole-cleaning method
-
Standard Shipping
$0.43Features:
- Faster installation than previous drop-in anchor design sets with 40% fewer hammer hits
- Positive-set marking system indicates when anchor is properly set
- Zinc-plated carbon steel
- Length: 2 in.
- Drill bit diameter: 5/8 in.
Minimum order quantity: 50
Order in multiples of: 50
-
Standard Shipping
$9.39Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
-
Standard Shipping
$23.49APHH heavy hangers connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents® structural wood screw and hex-head washer, and to the header with the Strong-Drive® SDS…
-
Standard Shipping
$8.09Features
- Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
- Easily attaches knee braces to posts or beams
- Adds decorative flair to knee brace connections
-
Standard Shipping
$15.18Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$1.22Features:
- Can be used to make a connection to either the top or bottom plate
- Embossment in the angle reinforces the plate
- Sill plate installation: fill all round holes
- Width: 1-3/8 in.
- Height: 6-11/16 in.
-
Standard Shipping
$46.29Features
- APVB66R is designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$5.29Features
- The open design and ability to field-adjust the slope make the LRUZ ideal for both retrofit or new applications.
- May be sloped down from 0° (0:12 pitch) to 49° (14:12). For slopes greater than 45°, allowable downloads are 0.85 of table loads.
- May be sloped up from 0° to 45°.
- For added versatility, the fasteners on the face of the hanger are placed high, enabling the bottom of the rafter to hang below the ridge beam
- Can be installed using nails or Strong-Drive® SD Connector screws.
-
Standard Shipping
$39.72
- This item has been DISCONTINUED.- SEE ET3G22-N FOR UPDATED MODEL
-
Standard Shipping
$6.69Features
- Versatile utility connector for joining wood members together in a corner connection without angled cuts
- Fastens with Simpson Strong-Tie® Outdoor Accents 1 1/2″ connector screws (not included)
- Easier and stronger than angled fastening
-
Standard Shipping
$9.39Features
- Installs quickly and easily with our Outdoor Accents 3 1/2″ structural wood screw and Outdoor Accents hex-head washer (sold separately)
- Easily attaches knee braces to posts or beams
- Adds decorative flair to knee brace connections
-
Standard Shipping
$43.29Features
- Combined with the Outdoor Accents structural wood screw (SDWSDBB), it provides a structural load-rated solution
- Easy to install
- Code listed in IAPMO-UES ER-192
-
Standard Shipping
$21.83Features:
- Minimum concrete edge distance is 5 in.
- Minimum concrete block left-to-right edge distance is 20 in.
- Length: 51 in.
- For additional length, an MST strap can be attached using 1/2- bolts through existing holes
- Made from 12-gauge steel
-
Standard Shipping
$3.81Features:
- Available with the bend reversed
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Versatile with many lengths offered to fit the specific application
- Length: 24 in.
- Made from 14-gauge steel
-
Standard Shipping
$28.39Features
- Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
- Ideal for general doweling and threaded rod applications
- Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
-
Standard Shipping
$18.19Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Install with Outdoor Accents structural screws and hex-head washer for decorative look (sold separately)
-
Standard Shipping
$6.09Features:
- Designed to help resist download forces
- The unique two-level embossment provides added stiffness to the top flange
- Quick installation
- Nominal joist size: 2×6
- Made from 14-gauge steel
-
Standard Shipping
$4.69Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
- ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
- The APVA4 is designed for use with 4x or larger lumber
-
Standard Shipping
$1.99Features
- The Avant Collection features straight edges and chamfered corners for a clean, timeless design
- Stronger than angled nailing or screw fastening alone for outdoor living or home repair projects
- Install with Outdoor Accents connector screws for decorative look and maximum strength (sold separately)
-
Standard Shipping
$48.19APHH heavy hangers connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents® structural wood screw and hex-head washer, and to the header with the Strong-Drive® SDS…
-
Free Shipping
$243.85Features:
- Tabs inside the MPBZ provide the code-required 1 in. post standoff to help prevent rot from standing water and ground moisture
- Stamped indicators and internal tabs identify the required concrete embedment depth
- Strategically placed holes simplify installation to allow template attachment
- Optional obround holes have been added for attaching trim material
- Additional holes at the embedment line allow standing water to exit and a point of visual inspection
-
Standard Shipping
$101.59Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$23.49Features
- Use all specified fasteners; see General Notes
- Use the Outdoor Accents structural wood screw (SDWS22312DBB) and hex-head washer (STN22) to connect to the joist
- Use the Strong-Drive SDS Heavy-Duty Connector screw (SDS25300) to connect to the header
- Fasteners sold separately
-
Standard Shipping
$12.79Features
- The Avant Collection features connectors with straight edges and chamfered corners for a clean and timeless contemporary design
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
