Showing all 14 resultsSorted by popularity
-
Special Order Shipping
$1,327.06
Features
- 19.4 Joules of impact energy for fast drilling and chipping, even in the hardest concrete.
- Anti-Rotation E-CLUTCH System shuts down the tool in bind up situations.
- Constant speed electronics allows the tool to maintain speed under load
- The SHOCKS Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature.
- The heavy weight design makes it ideally suited for horizontal and downward drilling for #9 – #14 rebar dowel applications and dry coring up to 6 in.
-
Free Shipping
$210.99
Features
- Mechanical 2-speed transmission (0-500 & 0-1,900 RPM) for a wide range of drilling and fastening applications
- Makita-built brushless motor delivers 440 in.lbs. of Max Torque
- Weighs only 3.6 lbs. with battery for reduced operator fatigue
- Built-in dual L.E.D. lights with afterglow illuminate the work area
- 3-year limited warranty on tool, battery and charger
-
Free Shipping
$817.99
Features
- Work in tight spaces with the lightweight, compact 7-1/2 in. Drill/Driver and 5-2/5 in. Cordless Impact Driver included in the Dewalt DCKSS676D2
- Brighten dark work areas: DCD777 Cordless Drill/Driver features an LED work light with 20-second trigger-release delay for enhanced visibility
- Professional speed and application control with DCF787 Cordless Impact Driver”s variable speed trigger for precision on delicate work surfaces
- Quick bevel adjustments: Brushless Circular Saw bevel shifts from 0 – 50° with a tool-free lever
- Quickly change blades and attachments without wrenches using the DCS356 Quick Change accessory system
-
Free Shipping
$678.99
Features
- Impact Driver features 3-speed power selection (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM) provides 1,550 in.lbs. of Max Torque; weighs only 3.3 lbs. with battery
- 7-1/4″ Circular Saw delivers 5,100 RPM for maximum performance and features a large 2-9/16” cutting capacity at 90°; weighs only 12.4 lbs. with batteries
- Efficient Makita-built brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditions
-
Free Shipping
$1,092.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Constant speed control automatically applies additional power under load for optimum performance
- Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- XGT® technology delivers up to 135 of 3/8″ holes per charge using full charged 40V XGT® 4.0Ah battery*
- Quick change chuck allows for interchangeability from SDS-PLUS to 1/2″ keyless chuck for utilization of straight shank bits
-
Special Order Shipping
$605.99
Features
- 1 – 1/8″ diameter vibrator delivers maximum consolidation power.
- 4 foot long flexible shaft for easy use and long reach.
- 14,000 VPM [under load] delivers maximum consolidation efficiency.
-
Special Order Shipping
$270.99
Features
- 6.5 amp, 10,000 rpm motor provides power for working in the hardest woods
- Dual rack and pinion fence ensure blade and fence are always parallel for accurate joints every time
- Integral one-piece fence is adjustable and tilts 0-90°
- Flush cuts can be made at 0° without removing fence
- 45-degree locating notch in fence allows indexing off the outside surface of a mitered joint
-
Special Order Shipping
$2,843.99
Features
- High-performance brushless motor delivers FLEXVOLT® cordless power for long runtime in demanding applications without the hassles of power cords.
- Anti-rotation E-Clutch™ system is a Perform & Protect™ feature increases user control.
- 9.0AH oil-resistant glass-filled nylon battery housed in a latched and sealed battery box for added protection from cutting oils.
- Patent pending pipe clamp depth gauge for quick set up.
- Use clamp with die arm for no direct contact with die head to start threads.
-
Special Order Shipping
$2,173.99
Features
- High-performance brushless motor delivers FLEXVOLT® cordless power for long runtime in demanding applications without the hassles of power cords.
- Anti-rotation E-Clutch™ system is a Perform & Protect™ feature increases user control
- 9.0AH oil-resistant glass-filled nylon battery housed in a latched and sealed battery box for added protection from cutting oils.
- Patent pending pipe clamp depth gauge for quick set up.
- Use clamp with die arm for no direct contact with die head to start threads.
-
Free Shipping
$324.99
Features
- Makita-built brushless motor delivers 6,000 RPM for faster cutting performance
- Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Large 2-5/8″ cutting capacity at 90°; cuts 3X material in a single pass
- 0-56° bevel capacity with positive stops at 22.5°, 45°, and 56°
-
Free Shipping
$527.99
Features
- 12 AMP motor with variable speed control dial (2,000 – 5,200 RPM) for optimum performance in a variety of materials
- Large cutting capacity (2-3/16″ at 90° and 1-9/16″ at 45°)
- Bevel capability (-1 to 48°) with positive stops at 22.5° and 45°
- Close to the wall cutting (11/16″) for expanded cutting applications
- Ideal for cutting large wood panels and other wood materials in confined areas
-
Free Shipping
$210.99
Features
- Makita XDT131 features a built brushless motor that delivers 1,500 in.lbs. of Max Torque
- Variable speed (0-3,400 RPM & 0-3,600 IPM) for a wide range of fastening applications
- Convenient 1/4″ hex chuck for quick bit changes
- Built-in dual L.E.D. lights illuminate the work area
- 3-year limited warranty on tool, battery and charger
-
Free Shipping
$502.99
Features
- Powered by two LXT batteries; X2 LXT technology delivers more power, speed and run time without the hassles of a cord
- Makita built electronically controlled BL™ Motor delivers 6,000 RPM for maximum performance and 50% longer run time per charge
- X2 LXT® technology delivers up to 610 crosscuts per charge in 2×4 SPF lumber and up to 320 crosscuts per charge in 2×10 SPF lumber using two 5.0Ah batteries
- Large 2-5/8” cutting capacity at 90°
- Electric brake for maximum productivity
- 0°- 56° bevel capacity with positive stops at 22.5°, 45°, and 56°
-
Free Shipping
$284.99
This item has been DISCONTINUED.
