Showing 1–40 of 66 resultsSorted by popularity
-
Free Shipping
$289.88Features:
- Full Case Containing 30 Rolls of Tie Wire
- Buy from an authorized Max USA Master Distributor
- Annealed steel wire – diameter 1.0mm
- For use with MAX RB441T TwinTier, RB611T, and RB401T-E TwinTier
-
Free Shipping
$370.85Features:
- Wire steel is melted, annealed, and drawn in the U.S.A
- Steel mill certification available
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
![TW1061T-EG [Roll]](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%20346%20310'%3E%3C/svg%3E)
Free Shipping
$366.10Features:
- Galvanized Wire Resists Rust and Corrosion
- Steel mill certification available
- 19 Guage Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
Free Shipping
$279.64Features
- 21 Gauge Steel Tie Wire
- Bare steel with no coating
- For use with MAX RB397, RB398, RB517 and RB518
-
Free Shipping
$162.16Features
- REPLACES JPL91440A 4.0AH BATTERY
- 14.4 Volts 5 Amp Hour capacity
- Works with RB217, RB218, RB397, RB398, RB441T, RB517, RB518, RB441T, RB611T, RB401T-E, and PJID143 tool models.
- Fully charged in 40 minutes or less.
- Built in charge indicator gauge on battery casing.
- Compatible with Max JC914, JC925 and JC928 chargers.
-
Free Shipping
$2,784.93Features:
- Double Tying Speed increases productivity
- Cost Saving – Mechanism dispenses precise amount of wire
- Shorter Tie Height
- Large Jaw – up to #7 x #7 rebar
- Long Battery Life up to 4,000 ties
- Easy Push Gear Release
- Fast Load Wire
-
Standard Shipping
$102.77
- 1-1/2×0.145in Smooth Shank Concrete Pin
- Max Powerlite Fasteners
- Plywood To Concrete
- Fiber Cement Siding To Concrete
- Mechanically Galvanized Carbon Steel
-
$169.99Features
- REPLACED WITH 5.0AH BATTERY JPL91450A
- 14.4 Volts 4 Amp Hour capacity
- Works with RB217, RB218, RB397, RB398, RB441T, RB517, RB518, and PJID143 tool models.
- Fully charged in 40 minutes or less.
- Built in charge indicator gauge on battery casing.
- Compatible with Max JC914, JC925 and JC928 chargers.
-
Free Shipping
$3,067.57Features:
- Ties up to #9 x #10 rebar
- Double The Speed – Dual Wire Feeding Mechanism
- Dispenses precise amount of wire needed to form a tie
- Shorter Tie Height
- One charge yields up to 4,000 ties
- Easy Load Tie Wire with Quick Load magazine
-
Free Shipping
$198.55
- JE400 Extension Arm is designed for adjustable height tying
- Compatible with RB441T, RB443T, RB611T, RB398S, RB518, RB218, RB655
-
Special Order Shipping
$141.75
-
![TW1061T-PC-[Roll]](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%20322%20316'%3E%3C/svg%3E)
Free Shipping
$640.99Features:
- Poly Coated Wire Resists Rust and Corrosion
- Use with epoxy coated rebar
- 19 Guage Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
$399.17Features:
-
Free Shipping
$2,804.53Features:
- Replaces RB441T
- Fastest Tying Speed
- Cost Saving – Uses Less Wire!
- Short Tie Height
- Easy Wire Loading
- Easy Handling
- Built To Last
-
Special Order Shipping
$1,439.10Features
- Max AKHL1260E features a Dc-Brushless Motor With Inverter Circuit
- Automatic system adjustment for maximum performance
- Quite mode
- LED control panel
- User friendly diagnostic system
- Four air outlets
-
Special Order Shipping
$116.10Features
- Tough, excellent strength of maximum working pressure 500 PSI
- Rubber/PVC blend construction
- Very flexible even in sub-zero temperatures
- 100-Feet x 3/8-Inch
- Solid brass connectors never corrode and give a better seal
- Abrasion-resistant outer cover
-
Free Shipping
$1,129.00Features
- Safer than conventional concrete pinn
- Drives .307″ head pins into concrete or steel with 2,231 inch lbs. driving force.
- Only 6.4lbs-this lightweight tool has less recoil than P.A.T tools.
- Self-cleaning filter for reliable operations
-
Standard Shipping
$8.67Features
- 21 Gauge Steel Tie Wire
- Bare steel with no coating
- For use with MAX RB397, RB398, RB517 and RB518
-
$947.15Features
- DISCONTINUED – SEE DCS692X2 FOR UPDATED MODEL
- Cuts up to 25.5 ft. of 1 in. scoring in cure concrete per charge
- 3-1/4 in. depth of cut for single pass in pavestones, rebar cutting, and concrete scoring
- Heavy-load indicator light provides power and runtime feedback during demanding applications
- 5-position rotatable guard for approach angle selection, allowing for optimal visibility and accessibility when cutting in tight spaces
- Dual-sided water feed system offers an OSHA Table 1 Compliant solution for dust management when cutting concrete
-
Free Shipping
$335.30The MAX CN80 is a safety equipped, lightweight yet heavy duty professional grade industrial coil nailer. Its die cast aluminum construction contributes to its lightweight. The CN80 is best used for industrial applications such as making pallets, crating, packaging, fences, decking, sheathing, furring, and siding.
-
Free Shipping
$245.72Features
- 4 Amp Hour (80 Watt hour) capacity provides extended runtime
- Same size & weight as DCB230 20V MAX* compact 3Ah battery
- Lighter weight with same capacity as DCB204 4Ah battery
- compatible with 20V MAX* tools and chargers
- Includes fuel gauge 3-LED charge indicator
-
Special Order Shipping
$262.48Dewalt DCB406 40 V MAX Lithium Ion 6.0 Ah Battery The 40 V MAX Lithium Ion 6.0 Ah Battery 40V MAX* 6.0Ah premium battery provides 240 watt hours of energy (50% more capacity than the 4.0Ah battery) to deliver long runtime. All DEWALT 40V MAX* batteries are compatible with DEWALT 40V MAX* Outdoor Power Equipment.
-
Free Shipping
$388.99Features
- Bright Led Control Screen
- lift-load capacity of up to 265 lbs. MAX
- Versatile Performance
- Built-In Pressure Sensor
- Audio Alarm
-
Standard Shipping
$29.99Features:
- Poly Coated Wire Resists Rust and Corrosion
- Use with epoxy coated rebar
- 19 Guage Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
Special Order Shipping
$448.99Features
- The Dewalt DCF403D1 features a brushless motor delivers up to 2,100 lb of pulling force for fastening rivets, including those made of stainless steel
- 800 RIVETS PER CHARGE** to maximize productivity on the jobsite
- DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
- COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/32″, 1/8″, 5/32″, and 3/16″ rivets
- CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
-
Free Shipping
$1,516.99Features
- Dewalt DCH775X2 offers rapid drilling and chipping in hard concrete with 19.4 J of impact energy
- Maintain speed under heavy loads with constant speed electronics
- Efficient performance and runtime with brushless motor and German-engineered apparatus
- Pro-grade versatility: Tackle horizontal and downward drilling for #9 – #14 rebar dowel applications, dry coring up to 6 in., chipping in any lower wall and floor, bushing, and ground rod driving
- Reduced vibration for comfortable grip Active Vibration Control
-
Special Order Shipping
$201.99Features
- Powerful motor delivers up to 740 CFM on high setting
- Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control
- Automatically oscillates 45º right and left
- Manually tilts 90º up and 45º down for convenient redirection of airflow
- 3-stage automatic timer with 1, 2, and 4 hour power-off selection
-
-
Free Shipping
$629.50Features
- 21 Gauge Steel Tie Wire
- Bare steel with no coating
- For use with MAX RB397, RB398, RB517 and RB518
-
Special Order Shipping
$2,460.93Features:
- 5 times faster than manual tying
- Lightweight and compact body for easy maneuvering and one handed operation
- Li-ion battery can complete 2600 ties per charge
- Ties approximately 120 times per coil.
- Brushless twisting motor
-
Special Order Shipping
$4,076.97FEATURES
- REDUCES BACK STRAIN – The RB401T-E is an ergonomic solution for backbreaking slab work.
- ADJUSTABLE HANDLES – Users can adjust the handles to 2 positions, to find the most comfortable fit for their height.
- TRIGGERLESS TECHNOLOGY – An automatic contact mechanism (Pat. Pending) allows the tool to instantly tie when pushed down over a rebar intersection.
- SHORTER TIE HEIGHT (Pat. Pending) – A Wire Bending Mechanism produces a shorter tie height. Less concrete is needed to fully cover a wire tie.
- ENCLOSED DESIGN – Greater protection against debris and moisure entering the tool.
- QUICKLY & EASILY LOAD TIE WIRE – Rapidly load the dual wire coil with the quick load magazine design.
-
Free Shipping
$2,680.11The RB518 is a battery operated rebar tying tool that can tie #5 x #5 to #7 x #8 rebar. You will save time, save money and increase productivity with this handy cordless tool. MAX Re-Bar-Tiers are also proven to reduce the risk of developing musculoskeletal diseases.
-
Free Shipping
$845.99Features
- Improved runtime, durability, and less maintenance with a brushless motor
- Easy access to confined spaces and hard-to-reach areas with a telescoping shaft
- Wireless ON/OFF capability when paired with a compatible dust extractor via Wireless Tool Control
- Quick, secure, and tool-free connection to DEWALT Dust Extractors via Airlock
- Additional control with the variable speed dial
-
Free Shipping
$727.99DeWalt DCK551D1M1 20V Max 5-Tool Cordless Drill Combo Kit This Cordless 5-Tool Combo Kit features DEWALT cordless tools including a 1/2-inch Drill/Driver, Reciprocating Saw, 6-1/2-inch Circular Saw, Brushless Oscillating Multi-Tool, 1/4-inch Impact Driver, 20V MAX 2.0Ah battery, 20V MAX 4.0Ah battery, charger, and bag. The DCS393 Circular Saw with a 6-1/2-inch carbide blade can cut…
-
Free Shipping
$438.99Features
- DCST922 Folding String Trimmer features a folding hinge that reduces length by 40%
- DCST922 Folding String Trimmer features a 14 in. cutting swath
- DCBL722 Handheld Axial Blower delivers up to 450 cfm of air volume and up to 125 mph with concentrator nozzle
-
Free Shipping
$423.99Features
- DCS590WW1 cuts through tough applications with up to 1,700 MWO
- Make fast cuts with a powerful brushless motor that delivers up to 5,500 RPM (no-load)
- Take on a wide range of materials with a maximum depth of cut of 2-9/16 in. at a 90° and a maximum depth of cut of 2 in. at a 45°
- automatic electric brake designed to stop the blade from coasting after the trigger switch is released
-
Free Shipping
$508.99Features
- 1030 ft-lbs of max fastening torque and 1400 ft-lbs of max breakaway torque
- 4-mode speed settings and variable speed trigger
- Precision Wrench control
- shock-absorbing battery-to-tool connection (battery sold separately)
- on-tool LED work light
-
Free Shipping
$630.99Features
- Secondary Foregrip Trigger
- Larger Cut Capacity for More Variety in Applicable Materials
- Powerful Brushless Motor
- Integrated Blade Guard
- Variable Speed Trigger and Dial
-
Free Shipping
$569.99Features
- Provides Larger Cut Capacity for More Variety in Applicable Materials
- Tool Connect CHIP READY
- Brushless Motor
- Integrated Blade Guard
- Variable Speed Trigger and Dial
-
Free Shipping
$13,914.24Features:
- Full pallet 48 Cases Tie Wire
- Buy from an authorized Max USA Master Distributor
- Annealed steel wire – diameter 1.0mm
- For use with MAX RB441T, RB443T TwinTier, RB611T, and RB401T-E TwinTier
![TW1061T-USA [Roll]](https://www.heydensupply.com/wp-content/uploads/2020/11/TW1061T-1000x1000-1-600x600.jpg "TW1061T-USA [Roll]")
![TW1061T-USA [Roll]](https://www.heydensupply.com/wp-content/uploads/2020/07/TW1061T-USA-Front-1-600x600.png "TW1061T-USA [Roll]")
![TW1061T-EG [Roll]](https://www.heydensupply.com/wp-content/uploads/2021/01/TW1061T.jpg)
![TW1061T-PC-[Roll]](https://www.heydensupply.com/wp-content/uploads/2021/01/max-tw1061t-pc-poly-coated-tie-wire-1.jpg)
