Showing 41–80 of 110 resultsSorted by popularity
-
Free Shipping
$255.99
Features
- Charges 2 18V LXT® 3.0Ah batteries in 60 minutes and 4 18V LXT® 3.0Ah batteries in 120 minutes
- Charges 2 18V LXT® Compact 2.0Ah batteries in 30 minutes and 4 18V LXT® Compact 2.0Ah batteries in 60 minutes
- Charger indicators provide updates on charging progress or charging status
- Charger monitors each battery and actively controls the current, voltage and temperature for faster charging and longer battery life
- 3-year limited warranty
-
Free Shipping
$660.99
Features
- Provides spark-free cuts that are clean and burr-free for easy hand-threading of fastener or nut
- Up to 1,300 cuts of 3/8” mild steel threaded rod and 1,200 cuts of 3/8” stainless steel threaded rod with one 18V LXT 5.0Ah battery (battery not included)
- Ideal for overhead cutting of installed threaded rod including 1/4″ and 3/8″ coarse thread diameter sizes
- Ergonomically designed handle provides a more comfortable hand position for increased comfort and less fatigue
- Compact design at only 7-7/8″ long and weighs only 7 lbs. with battery (battery not included)
-
Special Order Shipping
$95.99
Features
- Three speed settings (High/Medium/Low)
- Designed for reduced wind noise level for quiet operation
- Tilts up and down for convenient redirection of air flow
- Adjustable hook for easy handling and hanging
- Battery Protection Circuit protects against overloading, over-discharging and over-heating
-
Free Shipping
$468.99
Features
- Efficient cutting of up to 1/2″ thick cement board while producing less dust
- BL™ Brushless motor is designed to run cooler and more efficiently for longer life; delivers variable 0-3,000 SPM
- Ergonomically designed rubberized D-handle is optimized to provide increased comfort on the job
- Tool-free shear head rotates 360° for increased comfort in various cutting positions
- Cutting head is machined from precisely milled steel to ensure blades cut clean and straight
-
Free Shipping
$744.99
Features
- Efficient cutting of up to 1/2″ thick cement board while producing less dust
- BL™ Brushless motor is designed to run cooler and more efficiently for longer life; delivers variable 0-3,000 SPM
- Tool-free shear head rotates 360° for increased comfort in various cutting positions
- Ergonomically designed rubberized D-handle is optimized to provide increased comfort on the job
- Cutting head is machined from precisely milled steel to ensure blades cut clean and straight
-
Free Shipping
$255.99
Features
- Equipped with Bluetooth® to wirelessly connect your mobile device to play music
- Menu controls to set FM mono/stereo, clock settings, volume and snooze
- Runs up to 18 hours with an 18V LXT® Lithium-Ion 5.0Ah battery and 7.5 hours with an 18V Compact Lithium-Ion 2.0Ah battery (battery not included)
- Compatible with 12V max CXT®, 14.4V, and 18V LXT® Lithium-Ion batteries
- Elastomer bumpers and die-cast aluminum guards are engineered for increased durability
-
Standard Shipping
$184.99
Features
- Equipped with Bluetooth® to wirelessly connect mobile devices
- Up to 10 speakers can be wirelessly connected
- Features one auxiliary port for MP3 compatibility and one USB port for charging mobile devices
- Delivers rich full sound from one 4″ woofer with a passive radiator and one 1.4″ tweeter
- Two speakers can be connected to listen in true stereo sound
-
Free Shipping
$238.99
Features
- Adjustable temperature control with 6 maximum temperature settings: ambient air temperature, 302º, 482º, 662º, 842º and 1,022º F
- Adjustable air flow 4.2 / 7.1 CFM
- Trigger switch with lock-on and lock-off functions
- Up to 30 minutes of continuous run time on low with 18V LXT® 6.0Ah Battery BL1860B (battery not included)
- Up to 21 minutes of continuous run time on high with 18V LXT® 6.0Ah Battery BL1860B (battery not included)
-
Free Shipping
$341.99
Features
- Rack-and-pinion vertical fence system engineered for accurate fence adjustments
- Cast aluminum pivot fence with three positive stops at 0°, 45° and 90°, and easy centering on 3/4″ material
- Six depth settings with one-touch stops for #0, #10, and #20 and most common biscuits sizes
- Cordless plate joiner provides portability and performance in the field or in the shop without the cord
- Large and easy-to-operate cam locks for angle guide and fence adjustments
-
Free Shipping
$240.99
Features
- Brushless motor delivers 0-2,500 RPM with increased torque to handle high demand fastening applications
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power
- Depth adjustable nose piece with 5/16″ nutsetter delivers consistent screw fastening performance
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
-
Free Shipping
$544.99
Features
- Brushless motor delivers 0-2,500 RPM with increased torque to handle high demand fastening applications
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power
- Depth adjustable nose piece delivers consistent screw drive performance
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
-
Free Shipping
$496.99
Features
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener engages for longer run-time and motor noise reduction
- BL™ Motor delivers 0-4,000 RPM to handle a variety of drywall and framing applications
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Included: Collated Screw Magazine with easy and reliable auto-feed capability is ideal for production drywall hanging
- Collated screw length capacity range from 1″ to 2-3/16″ for increased versatility
-
Free Shipping
$3,112.99
Features
- Makita 18V LXT® Lithium-Ion battery allows for complete cordless hole punching mobility without the hassles of a cord
- Punches up to (180) 25/32″ diameter holes in 1/4″ thick steel with a 5.0Ah 18V LXT® Battery (battery not included)*
- Punch stop mechanism automatically retracts the die once a punch is complete to quickly continue operation
- Grip handle rotates 360° allowing for optimal positioning in a variety of spaces
- Adjustable depth guide allows for punch location adjustment up to 1-37/64″ (40 mm) from the edge of the workpiece
- Max metal plate thickness capacity of 5/16″ in general steel and 15/64″ in stainless steel
-
Free Shipping
$3,270.99
Features
- Makita 18V LXT® Lithium-Ion battery allows for complete cordless hole punching mobility without the hassles of a cord
- Punches up to (180) 25/32″ diameter holes in 15/64″ thick steel with a 5.0Ah 18V LXT® Battery
- Punch stop mechanism automatically retracts the die once a punch is complete to quickly continue operation
- Grip handle rotates 360° allowing for optimal positioning in a variety of spaces
- Adjustable depth guide allows for punch location adjustment up to 1-37/64″ (40 mm) from the edge of the workpiece
- Max metal plate thickness capacity of 5/16″ in general steel and 15/64″ in stainless steel
-
Free Shipping
$438.99
Features
- Selectable horizontal/vertical cross reference lines plus 4-point required for level, align, plumb and square applications
- Makita 12V max CXT® 4.0Ah rechargeable battery provides up to 40 hours of continuous run time (battery not included)
- Red line visibility range up to 82’ depending on ambient light and detectable up to 262′ with Makita Laser Detector LE00855702 (sold separately)
- Bright 635 nm class II red laser with +/-1/8” at 33’ for best-in-class accuracy
- Laser line fan angle spans past the 180° horizontal line and 170° vertical line positions for full reference line coverage
-
Free Shipping
$560.99
Features
- Ideal for mixing drywall mud, plaster, drilling large holes and more
- Variable 2-speed design (0-350 RPM and 0-1,300 RPM) for optimum speed control and mixing versatility
- Variable speed trigger allows the operator to adjust speed to the material or application
- Soft start suppresses start-up reaction for better accuracy
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
-
Free Shipping
$318.99
Features
- Ideal for mixing drywall mud, plaster, drilling large holes and more
- Variable 2-speed design (0-350 RPM and 0-1,300 RPM) for optimum speed control and mixing versatility
- Variable speed trigger allows the operator to adjust speed to the material or application
- Soft start suppresses start-up reaction for better accuracy
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
-
Free Shipping
$445.99
Features
- Powerful motor delivers up to 10,000 PSI of Max pressure
- Features two speed modes; Low and Auto-Speed for better control
- Auto-Speed mode applies grease while varying the flow rate automatically matching the resistance of the part being greased
- Variable speed trigger allows the user to adjust discharge rate
- Lock-on button for user convenience during longer work periods
-
Free Shipping
$324.99
Features
- Powerful motor delivers up to 10,000 PSI of Max pressure
- Features two speed modes; Low and Auto-Speed for better control
- Auto-Speed mode applies grease while varying the flow rate automatically matching the resistance of the part being greased
- Variable speed trigger allows the user to adjust discharge rate
- Lock-on button for user convenience during longer work periods
-
Free Shipping
$1,841.99
Features
- Quickly locates objects in multiple types of base materials to allow for immediate cutting, drilling, or coring for through penetrations
- Capable of detecting a variety embedded objects such as; metals (steel, aluminum, copper), wood, plastic and shielded electrical wire up to 7″ deep
- Selectable base material modes allow for increased versatility in dry concrete, wet concrete, wall partitions (wood or drywall) and hollow block
- Simplified user interface displays center, edge position, relative width and depth of embedded objects
- Multi-detection mode allows for scanning in up to three parallel surface positions; ideal for detecting objects running diagonally or detection affirmation
-
Free Shipping
$546.25
This item has been DISCONTINUED.
-
Free Shipping
$337.99
Features
- The Makita XWT18Z BL™ Brushless Motor delivers 520 ft.lbs. of Fastening Torque and 740 ft.lbs. of Nut-Busting Torque
- Compact and ergonomic design at only 6-11/16″ long
- 4-speed power selection switch (0-500 / 0-1,200 / 0-1,900 / 0-2,200 RPM & 0-1,000 / 0-1,700 / 0-2,400 / 0-2,700 IPM) for precise fastening control in a wide range of applications
- 3 forward and 3 reverse Auto-Stop modes for increased efficiency
- Full speed mode function reduces trigger pull to reach full speed
-
Free Shipping
$424.99
Features
- BL™ Brushless Motor delivers 780 ft.lbs. of Fastening Torque and 1,250 ft.lbs. of Nut-Busting Torque
- 3-speed power selection switch (0-900/ 0-1,000/ 0-1,800 RPM & 0-1,800/ 0-2,000/ 0-2,200 IPM) provides precise fastening control for a wide range of applications
- 3/4″ anvil with friction ring and thru hole retention system for maximum productivity
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
-
Free Shipping
$1,984.99
Features
- Quickly locates objects in multiple types of base materials to allow for immediate cutting, drilling, or coring for through penetrations
- Capable of detecting a variety embedded objects such as; metals (steel, aluminum, copper), wood, plastic and shielded electrical wire up to 7″ deep
- Selectable base material modes allow for increased versatility in dry concrete, wet concrete, wall partitions (wood or drywall) and hollow block
- Simplified user interface displays center, edge position, relative width and depth of embedded objects
- Multi-detection mode allows for scanning in up to three parallel surface positions; ideal for detecting objects running diagonally or detection affirmation
-
Free Shipping
$485.99
Features
- Makita-built motor delivers 12,500 VPM to help increase strength of concrete
- Dual-directional switch to conveniently hold the tool in either horizontal or vertical positions
- Up to 25 minute run time under load with 3.0Ah LXT® battery (battery not included)
- Compact and ergonomic design at only 105-1/2″ long
- Weighs only 11.4 lbs. with battery for reduced operator fatigue (battery not included)
-
Free Shipping
$485.99
Features
- Makita-built motor delivers 13,000 VPM to help increase strength of concrete
- Dual-directional switch to conveniently hold the tool in either horizontal or vertical positions
- Up to 25 minute run time under load
- Compact and ergonomic design at only 58-1/2″ long
- Weighs only 7.7 lbs. with battery (battery not included) for reduced operator fatigue
-
Free Shipping
$241.99
Features
- X-LOCK quick change system allows for tool-free wheel changes with simple snap-on mounting and pull release lever for change-out
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life; delivers 8,500 RPM
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
- Electric Brake stops the grinding or cut-off wheel in 2 seconds or less for maximum productivity
- Automatic Speed Change™ technology adjusts speed and torque during operation for optimum performance
-
Free Shipping
$2,855.99
Features
- Up to 125 cuts of #6 (3/4″) rebar on a single charge using 5.0Ah LXT® Battery
- Cutting capacity range of 1/8″- 3/4″; cuts up to 60 grade #6 rebar
- 4-way rotatable cutting blade makes up to 4,000 cuts of #3 (3/8″) rebar before needing to be replaced
- Cutting head rotates 360° for different cutting positions
- Adjustable stopper holds the rebar at 90° to the cutting blade and assists in smooth cutting
-
Free Shipping
$302.99
Features
- Sound pressure rating of 61 dB(A); measured per ANSI B 175.2 standard
- Makita-built motor produces a maximum air velocity of 120 MPH
- 6-stage air velocity/volume selection dial with variable speed control trigger
- Delivers up to 28 minutes of run time at 15,800 RPM using two 18V LXT® 5.0Ah batteries (batteries not included)
- Zero emissions and reduced maintenance; no need for gas or oil
-
Free Shipping
$328.99
Features
- Makita-built motor delivers 1,100 lbs. of dispensing force to dispense the highest viscosity adhesives and sealants
- 5 speed dial optimizes flow rate from 0-66 IPM
- Variable speed trigger allows user to match speed to the application
- 360° rotatable cartridge holder fits 10 oz. and 300 ml cartridges
- Drip-reduction feature automatically relieves pressure on the material when trigger is released to prevent unintentional dispensing
-
Free Shipping
$287.50
Features
- Makita-built motor delivers 1,100 lbs. of dispensing force to dispense the highest viscosity adhesives and sealants
- 5 setting speed dial optimizes flow rate from 0-66 IPM
- Variable speed trigger allows user to match the speed to the application
- 360° rotatable cartridge holder fits 28-29 oz. cartridges
- Drip-reduction feature automatically relieves pressure on the material when trigger is released to prevent unintentional dispensing
-
Free Shipping
$235.99
Features
- Brushless motor delivers 0-2,500 RPM with increased torque to handle high demand fastening applications
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power
- Depth adjustable nose piece delivers consistent screw fastening performance
- The BL Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
-
Free Shipping
$264.99
Features
- Quick-Shift Mode™ uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
- Brushless motor delivers 3,600 Max RPM and 1,600 in.lbs. of Max Torque
- 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications
- Additional one-touch 4-speed power selector button under the chuck for added convenience
- Assist Mode (A-mode) feature helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins
-
Free Shipping
$228.99
Features
- Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM
- 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Faster drilling with synchronized RPM and BPM
- Job site tested shock absorbent handle protects the battery housing for extra durability
-
Free Shipping
$502.99
Features
- Powered by two LXT® batteries; X2 LXT® technology delivers more power, speed and run time without the hassles of a cord
- Makita-built electronically controlled brushless motor delivers 5,100 RPM for maximum performance and 50% longer run time per charge
- The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life
- Automatic Speed Change™ technology adjusts cutting speed and torque during cut for optimum performance
- X2 LXT® technology delivers up to 558 crosscuts per charge in 2×4 SPF lumber and up to 291 crosscuts per charge in 2×10 SPF lumber using the two 5.0Ah batteries
-
Free Shipping
$637.99
Features
- Selectable horizontal/vertical cross reference lines required for level, align and plumb applications
- Up to 10 hours of continuous run time using included Makita 12V max CXT® 2.0Ah rechargeable battery; up to 20 hours of continuous run time using a 12V max CXT® 4.0Ah battery
- Green line visibility range up to 115’ depending on ambient light and detectable up to 262′ with Makita Laser Detector LE00855702 (sold separately)
- Bright 525 nm class II green laser for best-in-class visibility with +/-1/8” at 33’ for best-in-class accuracy
- Laser line fan angle spans past the 180° horizontal line and 160° vertical line positions for full reference line coverage
-
Free Shipping
$212.99
Features
- 2-mode operation: delivers 1,100 lumens on High and 450 lumens on Low
- Up to 22 hours of continuous illumination on low with a 4.0Ah 40V max XGT® (battery and charger not included)
- Up to 10 hours of continuous illumination on high with a 4.0Ah 40V max XGT® (battery and charger not included)
- Compatible with Makita® 40V max XGT® and 18V LXT® batteries (batteries not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
-
Free Shipping
$920.99
Features
- Makita-built brushless motor delivers up to 2X faster cutting performance*
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
- XPT is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Large 2-5/8″ cutting capacity in various metal materials including pipe, stud, channel, strut, conduit, angle, square tubing, sheet metal, and more
- Makita-built brushless motor delivers up to 160 cuts per charge in 2-1/2″ x 2-1/2′ x 1/4″ steel angle using a 40V max XGT® 4.0Ah Battery
