Showing 201–240 of 351 resultsSorted by popularity
-
$630.99
Features
- Secondary Foregrip Trigger
- Larger Cut Capacity for More Variety in Applicable Materials
- Powerful Brushless Motor
- Integrated Blade Guard
- Variable Speed Trigger and Dial
-
$569.99
Features
- Provides Larger Cut Capacity for More Variety in Applicable Materials
- Tool Connect CHIP READY
- Brushless Motor
- Integrated Blade Guard
- Variable Speed Trigger and Dial
-
$484.99
Features
- delivers 1420 ft-lbs of max fastening torque and 1900 ft-lbs of max breakaway torque
- Up To 102 % More Torque
- prevent overtightening and fastener run-off
- resist damage from oil, grease, and solvents with oil-resistant tool housing
-
$284.99
Features
- Heavy-duty 1/2″ ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength
- 3-Mode LED provides lighting in dark or confined spaces up to 20X brighter than previous model
- DCD996B LED Spotlight Mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces
- DEWALT-built high power, high efficiency brushless motor delivers up to 75% more runtime vs. 18v NiCad brushed motors
DCD996B Instruction Manual
-
6% OFF
$189.99 Original price was: $189.99.$177.99Current price is: $177.99.
Features
- Heavy-duty 1/2″ ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength
- 3-Mode LED provides lighting in dark or confined spaces up to 20X brighter than previous model
- LED Spotlight Mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces
- DEWALT-built high power, high efficiency brushless motor delivers up to 75% more runtime vs. 18v NiCad brushed motors
-
$266.99
Features
- Provides 99.9% UV protection
- Meets Z87.1+ impact resistant standards
- Full frame design with flexible temples
- Vented lenses and temples
- Rubber nosepiece
-
$247.99
Features
- DSV221 meets ANSI/ISEA 107 Standards.
- Durable stitch reinforcement at major stress points.
- Left side inner chest pocket.
- Single horizontal and two vertical reflective stripes.
- Left side inner chest pocket.
-
$3,719.52 – $3,891.99
Features
- ARC rating 5.1 Cal/CM2
- NFPA 70E HRC1
- DSV971 meets ASTM F1506.
- Garment background and reflective material certified to ANSI 107.
- Retro reflective material certified to ANSI 107 Level 2.
-
$1,364.97 – $1,664.60
Features
- ANSI/ISEA 107 Type O Class 1
- Lightweight RipStop Waterproof Polyester with mesh liner provides general purpose level of defense against harsh environments
- Zipper front closure with Hook & Loop storm flap, bottom snap and adjustable hem with toggle blocks the wind and wet.
-
Features
- Meets ANSI/ISEA 107 Standards.
- Durable stitch reinforcement at major stress points.
- Left side inner chest pocket.
- Single horizontal and two vertical reflective stripes.
- 100% high visibility polyester mesh.
-
$775.99
Features
- Meets ANSI/ISEA 107 Standards.
- Durable stitch reinforcement at major stress points.
- 1″ heavy webbing reinforcements.
- Tether & flagging tape grommets.
- Rear D-Ring pass through.
-
Features
- NFPA 70E HRC2
- ARC rating 10.0 Cal/CM2
- Retro reflective material certified to ANSI 107 Level 2.
- Meets ASTM F1506.
- Garment background and reflective material certified to ANSI 107.
-
$265.99
Features
- Dielectric construction
- features easy cap-mount design
- Adjustable fit
- Fold-able arms with 4-point suspension for even pressure distribution
- Padded ear cups
-
$754.99 – $839.99
Features
- Lightweight Polycarbonate/ABS shell
- EPS foam liner
- Articulating smooth glide ratchet suspension
- 4-point retention straps
- Adjustable leather chin strap
-
$754.99 – $839.99
Features
- Lightweight Polycarbonate/ABS shell
- EPS foam liner
- Articulating smooth glide ratchet suspension
- 4-point retention straps
- Adjustable leather chin strap
-
$66.77
Features
- Polished chrome vanadium finish for corrosion resistance
- DirectTorque technology allows for greater contact with the flat surface area of fasteners
- Knurled control ring for improved grip
- Hard stamped markings for increased durability and readability
-
$55.99
Features
- Includes 8 most common size sockets & 2-1/4″ adapters
-
$359.99
Features
- Up to 2.5x more runtime*
- Compact 14.5″ length fits in between studs & in other tight spots
- Only 5 lbs. in weight (tool only)
- Keyless 4-Position Blade Clamp for quick & easy blade changes & cutting versatility
- 1-1/8″ stroke length
-
$202.99
Features
- DW08302CG features a Green beam for increased visibility
- 120 ft. range
- 1/8 in. accuracy at 30 ft.
- Water and debris resistant with an IP54 rating
- 1 meter drop rating
-
$64.99
Features
- International Code Council, Evaluation Service (ICC-ES), ESR-3275
- Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
- Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, CMU block and steel
- Manufactured by DEWALT
-
$62.80
Features
- Pins for Concrete and Concrete Masonry (CMU)
- Gas Fasteners
- Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
- Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, CMU block and steel
-
$13.99
DeWalt 08288-PWR 1 In. Wire Brush for Ansi Hole No. 7 Rebar
-
$22.99
DeWalt 08287-PWR Wire Brush for 7/8 In. Ansi Hole No. 6 Rebar
-
$21.99
DeWalt 08278-PWR Threaded Hole Cleaning Wire Brush – 7-7/8 In, 3/4 In [5/8 In Rod or No. 5 Rebar]
-
$17.99
DeWalt 08275-PWR Wire Brush for 5/8 In Ansi Hole No. 4 Rebar
-
$26.99
DeWalt 08282-PWR 12″ Brush Extension
-
$15.49
[Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
$13.39
[Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer Drive pins with a .300″ head by Powers Fasteners have a specially designed point that allows it to properly penetrate into typical base materials for the purpose of permanently fastening a fixture to concrete, concrete block and structural steel. A plastic flute…
-
$13.79
[Pack of 100] DeWalt .300 Head Drive Pin 2In w-7/8In Washer 50096-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
$6.79
[Pack of 100] DeWalt .300 Head Drive Pin 1 1/2 In 50034-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
$12.75
Features
- Drive pins with a 0.300″ diameter head
- Plastic flute is mounted on the pin shank
- Fastening a fixture to concrete, concrete over steel deck, concrete masonry walls
- The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
-
$11.50
h3>[Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In. Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to increase performance in…
-
$12.50
[Pack of 100] DeWalt 50022-PWR Powers Fasteners 3/4″ Standard Drive Pins .300 Head Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to…
-
$12.50
[Pack of 100] DeWalt 50012-PWR Powers Fasteners 50012-PWR 1/2″ Standard Drive Pins .300 Head Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
$45.58
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
$17.29
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
$12.17
Features
- High quality powder loads, designed for consistently and reliability
- Specific load types are designed for each caliber powder actuated tool
- They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools
- Manufactured by DEWALT
-
$18.58
Features
- CFC free propellant
- Class B2 Flame retardant
- Physiologically harmless when fully cured
- Contains no urea formaldehyde or PCB’s
- Does not rot or deteriorate with age
-
$36.69
Features
- Designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Evaluated and recognized for long term and short term loading (see performance tables)
-
$34.99
Features
- Designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Evaluated and recognized for long term and short term loading (see performance tables for applicable temperature ranges)
