Showing 41–80 of 183 results
-
![08288-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/0f8b9fd27ab7e686cca5b81234911a71beb6b439-600x600.jpg)
Standard Shipping
$13.99
DeWalt 08288-PWR 1 In. Wire Brush for Ansi Hole No. 7 Rebar
-
![08288-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/0f8b9fd27ab7e686cca5b81234911a71beb6b439-600x600.jpg)
Standard Shipping
$22.99
DeWalt 08287-PWR Wire Brush for 7/8 In. Ansi Hole No. 6 Rebar
-
![08288-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/0f8b9fd27ab7e686cca5b81234911a71beb6b439-600x600.jpg)
Standard Shipping
$21.99
DeWalt 08278-PWR Threaded Hole Cleaning Wire Brush – 7-7/8 In, 3/4 In [5/8 In Rod or No. 5 Rebar]
-
![08275-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/damhdsmarketingtoolshand-toolsbrushes-brooms-mops-and-accessoriesbrusheswire-brushes21108275_hero_a-600x600.jpg)
Standard Shipping
$17.99
DeWalt 08275-PWR Wire Brush for 5/8 In Ansi Hole No. 4 Rebar
-
![08282-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/c32194de82831f728c1f8b1dd59bb4c39f183e02-600x600.jpg)
Standard Shipping
$26.99
DeWalt 08282-PWR 12″ Brush Extension
-
![50100-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/a44fd0bc09d380bc79ca3cd9202d73f2f7213671-600x600.jpg)
![50100-PWR 50100-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/50097_2-600x600.jpg)
Standard Shipping
$15.49
[Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
![50100-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/50097_2-600x600.jpg)
![50098-PWR 50100-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/a44fd0bc09d380bc79ca3cd9202d73f2f7213671-600x600.jpg)
Standard Shipping
$13.39
[Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer Drive pins with a .300″ head by Powers Fasteners have a specially designed point that allows it to properly penetrate into typical base materials for the purpose of permanently fastening a fixture to concrete, concrete block and structural steel. A plastic flute…
-
![50100-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/50097_2-600x600.jpg)
Standard Shipping
$13.79
[Pack of 100] DeWalt .300 Head Drive Pin 2In w-7/8In Washer 50096-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
![50034-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/de474a19905c22c91e5148bc33c050a89143d884-600x600.jpg)
Standard Shipping
$6.79
[Pack of 100] DeWalt .300 Head Drive Pin 1 1/2 In 50034-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
![50032-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/1e15b790cb03683249fbeb92c0123f43399c9df3-600x600.jpg)
![50034-PWR 50034-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/de474a19905c22c91e5148bc33c050a89143d884-600x600.jpg)
Standard Shipping
$12.75
Features
- Drive pins with a 0.300″ diameter head
- Plastic flute is mounted on the pin shank
- Fastening a fixture to concrete, concrete over steel deck, concrete masonry walls
- The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
-
![50026-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/a57e7091439b1acc0f1c9270fdf7444fb1a684c6-600x600.jpg)
Standard Shipping
$11.50
h3>[Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In. Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to increase performance in…
-
![50022-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/d3399caf10fbf941016add3ccddcfc7b24270faf-600x600.jpg)
Standard Shipping
$12.50
[Pack of 100] DeWalt 50022-PWR Powers Fasteners 3/4″ Standard Drive Pins .300 Head Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to…
-
![50012-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/50026-600x600.jpg)
Standard Shipping
$12.50
[Pack of 100] DeWalt 50012-PWR Powers Fasteners 50012-PWR 1/2″ Standard Drive Pins .300 Head Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
![7422SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/0d775e3e8062253ae9bd5076f2c2a016cb45d17c-600x600.jpg)
![7422SD1-PWR 7422SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/ad3f9fa17e4125d7dd967e8453aabb9bb70909d3-600x600.jpg)
Standard Shipping
$45.58
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![7413SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/ec299cb43df9682e2474f80707f8cf8226505be8-600x600.jpg)
![7413SD1-PWR 7413SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/7102c6a4bfafc6023a0f8394fc049f731c99fe92-600x600.jpg)
Standard Shipping
$17.29
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![50630-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/082bd009b571f22562a66f7833da55a8378863d6-600x600.jpg)
![50630-PWR 50630-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/dd2e2055d4e4177cc2c6d3594f64977ba81dfd83-600x600.jpg)
Standard Shipping
$12.17
Features
- High quality powder loads, designed for consistently and reliability
- Specific load types are designed for each caliber powder actuated tool
- They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools
- Manufactured by DEWALT
-
![08132N-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/abcedb639cdd42932200a8bd11e5b36e23f39650-600x600.jpg)
Standard Shipping
$18.58
Features
- CFC free propellant
- Class B2 Flame retardant
- Physiologically harmless when fully cured
- Contains no urea formaldehyde or PCB’s
- Does not rot or deteriorate with age
-
![08321SD-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/645933036e1e608506416b58816cad592450ebd3-600x600.jpg)
![08321SD-PWR 08321SD-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/b49d54dd964a38d60395291182eff86b0c9da7f0-600x600.jpg)
Standard Shipping
$36.69
Features
- Designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Evaluated and recognized for long term and short term loading (see performance tables)
-
![08605-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/a207b50372c70e769d38fd4627ca086863c75a10-600x600.jpg)
![08605-PWR 08605-PWR](https://www.heydensupply.com/wp-content/uploads/2024/01/18b0fb186e6d8da4df435eb50920062feb27552f-600x600.jpg)
Standard Shipping
$34.99
Features
- Designed for use with threaded rod and reinforcing bar hardware elements
- Evaluated and recognized for freeze/thaw performance
- Cartridge design allows for multiple uses using extra mixing nozzles
- Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
- Evaluated and recognized for long term and short term loading (see performance tables for applicable temperature ranges)
-
![PFM1411800](https://www.heydensupply.com/wp-content/uploads/2023/11/SCREW-BOLT__90589-600x600.jpg)
Standard Shipping
$39.46
Features
- PFM1411380 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
![7446SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/PowersSD1WedgeAnchor__32202-600x600.jpg)
Standard Shipping
$33.75
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![7446SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/PowersSD1WedgeAnchor__32202-600x600.jpg)
Standard Shipping
$26.05
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![7446SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/PowersSD1WedgeAnchor__32202-600x600.jpg)
Standard Shipping
$42.35
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![7446SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/PowersSD1WedgeAnchor__32202-600x600.jpg)
Standard Shipping
$34.49
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![7446SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/PowersSD1WedgeAnchor__32202-600x600.jpg)
Standard Shipping
$36.99
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![7446SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/PowersSD1WedgeAnchor__32202-600x600.jpg)
Standard Shipping
$26.65
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![7446SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/PowersSD1WedgeAnchor__32202-600x600.jpg)
Standard Shipping
$23.35
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![7446SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/PowersSD1WedgeAnchor__32202-600x600.jpg)
Standard Shipping
$24.50
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![7446SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/PowersSD1WedgeAnchor__32202-600x600.jpg)
Standard Shipping
$17.79
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![7446SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/PowersSD1WedgeAnchor__32202-600x600.jpg)
Standard Shipping
$16.99
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![7446SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/PowersSD1WedgeAnchor__32202-600x600.jpg)
Standard Shipping
$24.49
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
![7446SD1-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/PowersSD1WedgeAnchor__32202-600x600.jpg)
Standard Shipping
$22.35
Features
- Structural connections, i.e., bean and column anchorage
- Safety related attachments
- Interior applications / low level corrosion environment
- Tension zone applications, i.e., cable trays and strut, pipe supports, fire sprinklers
- Seismic and wind loading
-
![02820-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/58cf98bc680189475cfcb251216b041955e49163-600x600.jpg)
Standard Shipping
$12.99
Features
- General purpose anchoring
- 02820-PWR installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
-
![02820-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/58cf98bc680189475cfcb251216b041955e49163-600x600.jpg)
Standard Shipping
$10.99
Features
- General purpose anchoring
- 02814-PWR installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments
-
![05523-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/8a06dadf0f255ff1e3ea221b5383155a4aa54dc6-600x600.jpg)
Standard Shipping
$25.59
Features
- 05523-PWR offers a pre-expanded anchor design allowing for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
-
![03794-PWR](https://www.heydensupply.com/wp-content/uploads/2023/11/3ea0993366f8df893cf9ca9818f8c7b9499b7a1a-600x600.jpg)
Standard Shipping
$59.99
Features
- 03794-PWR offers a pre-expanded anchor design, which allows for easy installation
- Mushroom and flat head Spike anchors are tamper-proof
- Forming Spike, which is removable, can be used for temporary installations
- Pipe and tie-wire Spike is a simple to install alternative to direct fastening (e.g. powder actuated)
-
![DFM12724B](https://www.heydensupply.com/wp-content/uploads/2023/11/UltraconPlusHexWasherBlue__29643-600x600.jpg)
Standard Shipping
$19.15
Features
- DFM12724B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
-
![DFM12724](https://www.heydensupply.com/wp-content/uploads/2023/11/712A8oBjUmL._SL1500_-600x600.jpg)
Standard Shipping
$12.99
Features
- DFM12724 is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip
- Does not exert expansion forces
-
![DFM12724B](https://www.heydensupply.com/wp-content/uploads/2023/11/UltraconPlusHexWasherBlue__29643-600x600.jpg)
Standard Shipping
$14.20
Features
- DFM12722B is available in several head styles
- Several colors and finishes to match application
- Removable (reusable in wood)
- High-low thread design for greater stability and grip