Wagman WX8180 8x18in Combination Silver Power Trowel Blades
Free Shipping
$19.13Features:
- 8in Wide by 18 Inches Long
- Bar Mount On 48 Inch Power Trowel Machines
- Box of 4 Trowel Blades
- Longest Lasting Silver Blades
Showing 1–40 of 79 resultsSorted by popularity
-
-
Simpson Strong-Tie AT3G10 High-Strength Hybrid Acrylic Adhesive
Standard Shipping
$18.00Features
- AT3G10 offers excellent for use in cold weather conditions or applications where fast cure is required
- Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
- Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
- Base material installation temperatures down to 0°F (-18°C)
- Use in grout-filled CMU construction
-
Wagman WX8140 8″x14″ Combination Blades
Standard Shipping
$19.66Features:
- 8in X 14in
- Bar Mount
- Box of 4 blades
Minimum order quantity: 4Order in multiples of: 4 -
Norton 14 In. x .125 In. x 1 In.-20 mm Clipper Multi-Cut Segmented High-Speed Blade
Special Order Shipping
$110.99Features:
- Has a .472 inch impregnated diamond segment for longer life, smoother finish and faster cutting
- Alternating turbo segment for cut speed, and plain segment for life
- Ventilated steel center with cooling holes to reduce heat when cutting
- Laser cut dual arbor for consistent fit on high-speed, masonry, and walk-behind saws
-
Max HN120 Powerlite High Pressure Concrete Pinner to 2-1/2in 500psi
Free Shipping
$1,129.00Features
- Safer than conventional concrete pinn
- Drives .307″ head pins into concrete or steel with 2,231 inch lbs. driving force.
- Only 6.4lbs-this lightweight tool has less recoil than P.A.T tools.
- Self-cleaning filter for reliable operations
-
GA9060RX3 7″ Concrete Surface Planer with Dust Extraction Shroud
Free Shipping
$347.99Features
- Dust extraction shroud is designed to capture dust during concrete surfacing applications
- Powerful 15.0 AMP motor delivers 6,600 RPM for optimum durability and performance
- Anti-restart protection is designed to prevent motor start up in the on-power switch position after a power disruption
- Power light indicates switch failure, cord damage or worn-out motor brushes
- Loop handle can be held at multiple positions for increased comfort in various orientations
- Rear handle trigger switch with lock-off feature requires two actions to power on
-
B-61139 5/8″ x 10″ SDS‑PLUS Bit, 3‑Cutter
Standard Shipping
$22.00Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-60573 3/16″ x 6″ SDS‑PLUS Bit, 2‑Cutter
Standard Shipping
$3.40Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-60551 5/32″ x 6″ SDS‑PLUS Bit, 2‑Cutter
Standard Shipping
$5.52Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 4″usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
Norton CP514-350i Clipper 14 In. 2 Cycle C/O Saw
Special Order Shipping
$1,383.99Features:
- Patented twin-air inlets and external rocker wheel keeps saw running clean and reduces debris being trapped in the filter
- The four-step easy start eliminates the hassle of a choke by simply turning the switch on, priming the engine, pushing the decompression button, then pulling the cord to start
- The electronic carburetor?s electromagnetic valve eliminates the standard choke and half throttle start
- The patented iLube option automatically controls mixing of oil and fuel for maximum efficiency
-
Norton 12 x 0.475 In. Clipper Charger Segmented Rim Core Bit
Special Order Shipping
$624.99Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-
308S Marshalltown Industrial Concrete Sprayer
Free Shipping
$203.99Features
- 308S Sprays up to 35% solids
- Use with concrete sealers, curing agents, form oils, and more
- Viton seals and gaskets
- Solvent- and chemical-resistant
- Brass wand, fittings, and trigger assembly
-
DeWalt DCH614X2 60V Max 1-3/4 in. Brushless Cordless SDS Max Combination Rotary Hammer Kit [9.0 Ah]
Free Shipping
$1,213.99Features
- DCH614X2 produces 10.5 Joules of impact energy for fast drilling and chipping, even in the hardest concrete
- Anti-Rotation E-CLUTCH System shuts down the tool in bind up situations
- Constant speed electronics allows the tool to maintain speed under load
- The Shocks Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature
- The midweight design makes it ideally suited for horizontal drilling for #4 – #8 rebar dowel applications and dry coring up to 4 in
-
B-69593 4‑1/2in Diamond Blade Segmented General Purpose
Standard Shipping
$22.90Features
- feat1
- 50% taller (13mm) segments are designed for longer life and faster cutting
- For cutting concrete, block, brick, and pavers
- Optimum bond matrix provides a faster, longer lasting, and smoother cutting
- Up to 40% faster cutting than turbo blade
- Carefully tensioned for less vibration and a superior user experience
- For use with angle grinders
- Dry or wet cutting for added versatility
-
Max HS130 Powerlite High Pressure Concrete Pinner to 1in 500psi
Free Shipping
$1,439.10Features
- 2,071 inch lbs. driving force
- Lower recoil action
- Fitted with points teeth on the contact arm
- Equipped with a nose magnet
- Maintenance free end cap filter
-
B-64163 Adapter, Spline‑SDS‑PLUS
Standard Shipping
$75.76Features
- Allows the use of SDS-PLUS bits in Spline shank rotary hammers
- Engineered to hold up to the most demanding of applications
- High quality steel construction for longer life
- For use in rotary hammers that accept Spline shank bits
-
B-61569 1‑1/2″ x 21″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$106.15Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61547 1‑3/8″ x 21″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$92.33Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61531 1‑1/4″ x 36″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$115.28Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61525 1‑1/4″ x 21″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$74.48Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61503 1‑1/8″ x 36″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$134.20Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61494 1‑1/8″ x 21″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$70.33Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61488 1‑1/8″ x 13″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$63.96Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61472 1″ x 36″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$120.27Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61466 1″ x 21″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$49.20Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61450 1″ x 13″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$45.37Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-MAX shank bits
-
B-61444 7/8″ x 36″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$83.08Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61438 7/8″ x 21″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$56.42Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61422 7/8″ x 13″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$41.43Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61400 3/4″ x 36″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$95.10Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61391 3/4″ x 21″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$43.67Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61385 3/4″ x 13″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$35.81Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61363 5/8″ x 36″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$90.31Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 31″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61357 5/8″ x 21″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$43.35Features
- 6-cutter bit tip is engineered for drilling in reinforced concrete
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61341 5/8″ x 13″ SDS‑MAX Bit, 6‑Cutter
Standard Shipping
$34.53Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61313 1/2″ x 21″ SDS‑MAX Bit, 2‑Cutter
Standard Shipping
$40.91Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61307 1/2″ x 13″ SDS‑MAX Bit, 2‑Cutter
Standard Shipping
$30.50Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61167 3/4″ x 18″ SDS‑PLUS Bit, 3‑Cutter
Standard Shipping
$35.70Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61151 3/4″ x 10″ SDS‑PLUS Bit, 3‑Cutter
Standard Shipping
$29.49Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 8″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
-
B-61145 5/8″ x 18″ SDS‑PLUS Bit, 3‑Cutter
Standard Shipping
$28.26Features
- Self-centering carbide tip
- Centering tip features a more aggressive design for faster hole starting
- Central guiding action engineered for more accurate holes
- Aggressive head geometry in primary cutter engineered for use in concrete
- Engineered for reduced vibration
- 16″ usable length
- For use with Rotary Hammers that accept SDS-PLUS shank bits
