Showing 81–101 of 101 resultsSorted by popularity
-
Standard Shipping
$5.54Features:
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
Standard Shipping
$2.83Features:
- Helps resist tension forces
- Staggered nail pattern reduces the potential for splitting
- Width: 1-1/4 in.
- Length: 21-5/8 in.
- Made from 16-gauge steel
-
Free Shipping
$266.58Features:
- Cap-style head countersinks fully into the double top plate to avoid interference with drywall or finish trades
- Wide tolerance on installation angle makes it easy to install the SDWC correctly
- Can be installed from inside the structure, eliminating exterior work on the upper stories and enhancing job safety
- Fastening can be performed before or after exterior sheathing is applied for added flexibility
- Type-17 point for faster starts and easier driving
-
Standard Shipping
$2.59Features:
- Available with the bend reversed; specify –REV- after the model number, such as HTS16-REV
- Versatile with many lengths offered to fit the specific application
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Length: 16 in.
- Made from 14-gauge steel
-
Standard Shipping
$28.25Features:
- Cost-effective one-piece design compared to welded hangers
- A full-height joist flange that captures the top chord of the joist to prevent rotation and eliminate the need for web stiffeners
- Available for special order to accommodate sloped and/or skewed members
- Actual joist size: 3-1/2 in. x 14 in.
- Made from 14-gauge steel
-
Standard Shipping
$3.02Features:
- Available with the bend reversed; specify –REV- after the model number, such as HTS20-REV
- Versatile with many lengths offered to fit the specific application
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Length: 20 in.
- Made from 14-gauge steel
-
Standard Shipping
$0.24Features:
- Quick installation, no nails required
- Keeps panels even for a level structural plane
- Provides the 1/8-in. space between plywood panels as recommended by the American Plywood Association
- Use the same size sheathing clip as the panel thickness
- Made from 20-gauge steel
-
Standard Shipping
$20.15Features:
- Chamfered top designed to prevent mushrooming during installation
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
- Tested per ACI355.2 and AC193
-
Standard Shipping
$14.15Features:
- Suitable for lighter duty holdown applications on single or double 2x posts
- Ties the guardrail post into deck framing
- Stronger and safer than nails, lag screws or bolts
- Ties the deck into the house for a stronger, safer ledger connection
- Helps prevent a common type of deck failure
-
Standard Shipping
$25.46Features:
- Simpson Strong-Tie Connector nails are the best choice for Simpson Strong-Tie connectors
- Head ID stamp for easy identification
- Smooth shank
- Smooth head
- Length: 1-1/2 in.
-
Standard Shipping
$52.37Features:
- Eliminates the need to access the floor joists inside the house
- Ties the guardrail post into deck framing
- Stronger and safer than nails, lag screws or bolts
- Ties the deck into the house for a stronger, safer ledger connection
- Helps prevent a common type of deck failure
-
Standard Shipping
$8.29Features:
- Designed to help resist download forces
- The unique two-level embossment provides added stiffness to the top flange
- Quick installation
- Seat width: 1-9/16 in.
- Height: 9-3/16 in.
-
Standard Shipping
$2.53Features:
- Chamfered top designed to prevent mushrooming during installation
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
- Tested per ACI355.2 and AC193
-
Standard Shipping
$0.87Features:
- Great for connecting 2x deck joists on top of a perpendicular beam
- Install in pairs on either side of the rafter/truss/joist to provide resistance to uplift and lateral forces
- Use also for a variety of connections where one member crosses another
- Made from 18-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Standard Shipping
$7.05Features:
- Setting tool for DIAB anchors
- For use with Simpson Strong-Tie Drop-In models DIAB50, DIABL50, and DIAB50C
- Sets drop-ins for overhead applications
- Drop-in anchors are sold separately
- Made from carbon steel
-
Standard Shipping
$6.07Features:
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
Standard Shipping
$2.53Features:
- Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
- Loads have been increased for wind and seismic forces
- Floor-to-floor clear span application
- Length: 24 in.
- Width: 1-1/4 in.
-
Standard Shipping
$2.20Features:
- Attaches easily to the concrete form for quick installation
- Lays flat on the form board so there is no anchor bolt to finish around
- No labor costs involved in drilling plates and aligning holes
- Flat design eliminates chances of modification in prefabricated walls
- Eliminates the need to notch studs due the anchor bolts being placed where it will interfere
-
Standard Shipping
$27.75Features:
- Quick installation, no nails required
- Keeps panels even for a level structural plane
- Provides the 1/8-in. space between plywood panels as recommended by the American Plywood Association
- Use the same size sheathing clip as the panel thickness
- Made from 20-gauge steel
-
Standard Shipping
$13.41Features:
- SUR = skewed right
- Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
- These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
- Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
- Nominal joist size: 2×6 or 2×8
-
Standard Shipping
$4.05Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: Double 2×8 and Double 2×10
