Showing 121–160 of 186 resultsSorted by popularity
-
Free Shipping
$1,092.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Constant speed control automatically applies additional power under load for optimum performance
- Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- XGT® technology delivers up to 135 of 3/8″ holes per charge using full charged 40V XGT® 4.0Ah battery*
- Quick change chuck allows for interchangeability from SDS-PLUS to 1/2″ keyless chuck for utilization of straight shank bits
-
Special Order Shipping
$1,030.99
Features
- FAST DRILLING IN CONCRETE with 4.5 J of impact energy
- System reduces vibration felt by the user at the handles comparted to rotary hammers without this feature
- System shuts down the tool in bind up situations
- when paired with DWH200D shroud and DCV585 dust extractor
- to quickly switch between drilling, hammer drilling, and chipping applications
-
Special Order Shipping
$1,395.99
Features
- RAPID DRILLING AND CHIPPING in hard concrete with 13.3 J of impact energy
- MAINTAIN SPEED UNDER HEAVY LOADS with constant speed electronics
- EFFICIENT PERFORMANCE AND RUNTIME with brushless motor and German-engineered mechanism
- PRO-GRADE VERSATILITY: Tackle horizontal and downward drilling for #6 – #9 rebar dowel applications, dry coring up to 5 in., chipping in any lower-to-mid wall, bushing, and ground rod driving
- REDUCED VIBRATION FOR COMFORTABLE GRIP with SHOCKS™ Active Vibration Control®
-
Free Shipping
$927.99
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
- Compact and ergonomic design at only 77″ long
- Weighs only 10.6 lbs. with battery for reduced operator fatigue
-
Free Shipping
$600.99
Features
- Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the accessory is suddenly forced to stop
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,400/ 0-2,600/ 0-3,600/ 0-4,100 IPM) provides 1,860 in.lbs. of Max Torque
- Tightening Mode (T-mode) for faster tightening of self-drilling screws in thick or thin gauge metal
-
Free Shipping
$684.99
Features
- Delivers corded performance with cordless convenience
- Compact sanding arm pivots up to 160° for compact storage
- L.E.D. light adjusts to match angle of the sanding arm or shape of the workspace
- Electric brake allows the tool to be repositioned faster for maximum productivity
- Versatile for use in wood and steel applications
-
SALE 4% OFF
Free Shipping
$1,192.99 Original price was: $1,192.99.$1,145.27Current price is: $1,145.27.
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
- Compact and ergonomic design at only 99″ long
- Weighs only 17.2 lbs. with battery for reduced operator fatigue
-
Free Shipping
$384.99
Features
- Quiet Series compressor design at only 58 dB for operator and crew comfort; ideal for indoor use
- Compressor runs at a lower RPM (1,750) resulting in longer motor and pump life
- Complete roll-cage construction provides the compressor with protection to withstand a variety of job-site, transporting, and storage environments
- Oil-free dual-piston pump designed for maintenance-free operation
- Compressor features a lightweight design for increased job site portability, an oil-free dual-piston pump designed for maintenance-free operation, and a cord wrap for convenient AC power cord storage
-
SALE 6% OFF
Free Shipping
$645.99 Original price was: $645.99.$607.23Current price is: $607.23.
Features
- Powerful motor design drives standard 16 gauge, straight finish nails from 1″ to 2-1/2″ in length
- Compact center height enables viewing around the nose tip when fastening in tight spots
- Anti-dry fire mechanism engineered to help prevent driving blanks and damage to work surface
- Built-in L.E.D. light illuminates the work area
- Reversible belt clip allows the tool to remain close
-
Special Order Shipping
$545.99
Features
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
-
Special Order Shipping
$545.99
Features
- Micro nose improves line of sight and accuracy of nail placement
- Brushless motor maximizes runtime and durability
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
-
Special Order Shipping
$1,005.99
Features
- Gas-free operation eliminates the need for fuel cells and provides a consistent, powerful alternative that operates on the DEWALT 20V MAX battery platform
- Variable power settings allow for pin depth adjustment and substrate versatility
- Field-serviceable driver blade reduces downtime of tool
- Comparable application speed to gas concrete nailers
- Dual LED worklights help illuminate work surface and provide onboard diagnostics
-
Special Order Shipping
$605.99
Features
- 1 – 1/8″ diameter vibrator delivers maximum consolidation power.
- 4 foot long flexible shaft for easy use and long reach.
- 14,000 VPM [under load] delivers maximum consolidation efficiency.
-
SALE 4% OFF
Special Order Shipping
$448.99 Original price was: $448.99.$431.03Current price is: $431.03.
Features
- Dewalt DCN680D1 is 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
DCN680D1 Instruction manual
-
Free Shipping
$884.99
Features
- Makita built brushless motor with two speed, variable speed (0-400 RPM and 0-1,500 RPM) for maximum efficiency and a wide range of drilling applications
- Drills up to 6-1/4″ holes with hole saws and 4-5/8″ holes with self feed bits
- Weighs only 11.9 lbs. with battery and ergonomic design for operator comfort
- Torque limiter; built-in clutch reduces gear damage by disengaging gears if the bit binds
- Built-in L.E.D light with pre-glow and afterglow illuminates the work area
-
Special Order Shipping
$662.99
Features
- Fast Drilling in Concrete With 2.1 joules of impact energy
- OSHA Table 1 Compliant when paired with DWH303DH on-board extractor
- Shocks Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature
- mechanism and brushless motor for efficient performance and runtime.
- Lightweight Design makes this tool ideal for rod hanging, seismic & safety attachments, cable tray & strut mounting, clamp mounting, and rail mounting.
-
SALE 6% OFF
Special Order Shipping
$326.99 Original price was: $326.99.$307.37Current price is: $307.37.
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable speed control from 8,000 – 12,000 OPM to match the speed to the application.
- Low profile height allows user to get close to work surface for precise sanding.
- Replaceable 8-hole hook-and-loop sanding pad (DWE64233) for quick, easy paper changing.
- Dust-sealed switch to protect against dust ingestion for long switch life.
-
Special Order Shipping
$514.99
Features
- Able to cut 1/4″, 3/8″, 1/2″ Mild Steel Coarse Threaded Rod
- Able to cut 1/4″, 3/8″ Stainless Steel Coarse Threaded Rod
- Clean, burr-free cuts allowing for easy threading
- Bright LED light to help illuminate cutting area
- Rotating cutter allows you to cut multiple sizes of rod with one cutting die
-
Free Shipping
$498.99
Features
- Makita-built brushless motor delivers 1,860 in.lbs. of Max Torque
- Digitally controlled mode, Tightening Mode (T-mode) for faster tightening of self-drilling screws; helps prevent damage to the screw or workpiece
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,400/ 0-2,600/ 0-3,600/ 0-4,100 IPM)
- Compact length at only 4-3/4″; ideal for working in tight spaces
-
Free Shipping
$678.99
Features
- Makita-built brushless motor delivers up to 15% faster firing*
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- Refined firing mechanism reduces recoil; reduces force required on the work surface when driving pin nails
- Drives 6 different lengths, 5/8″, 11/16″, 3/4″, 1″, 1-3/16″ and 1-3/8″, of 23 gauge pin nails (tool does not work with 1-1/4″ pin nails)
-
Free Shipping
$485.99
Features
- Makita-built brushless motor delivers 585 in.lbs. of Max Torque
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- The Makita GFD02D offers two speed settings (0-550 & 0-2,200 RPM)
- Compact length at only 6-11/16″; ideal for working in tight spaces
-
Special Order Shipping
$253.99
Features
- The 3-speed selector allows users to choose their speed setting based on application
- Brushless motor delivers up to 57% more runtime over brushed
- Dual-Grip™ variable-speed trigger gives users ultimate speed and application control
- Universal accessory adapter makes it compatible with most oscillating tool accessory brands
- Quick-Change™ accessory system allows blades and attachments to be changed quickly without wrenches
-
Free Shipping
$744.99
Features
- Efficient cutting of up to 1/2″ thick cement board while producing less dust
- BL™ Brushless motor is designed to run cooler and more efficiently for longer life; delivers variable 0-3,000 SPM
- Tool-free shear head rotates 360° for increased comfort in various cutting positions
- Ergonomically designed rubberized D-handle is optimized to provide increased comfort on the job
- Cutting head is machined from precisely milled steel to ensure blades cut clean and straight
-
Special Order Shipping
$448.99
Features
- Up to 19% more power vs the DCS388**
- Power of corded with the freedom of cordless
- 0 – 3000 SPM and 1-1/8 in. stroke length for fast and efficient cutting
- Keyless lever-action blade clamp for quick and easy blade changes
- Variable-speed trigger allows user to instantly control speed
-
Special Order Shipping
Features
- Greater speed than DW272 corded screwgun with up to 4,400 RPM
- DEWALT built brushless motor for efficient performance and runtime
- Nosecone locks on securely and is easily removed while maintaining consistent screw depth
- Compatible with the DCF6201 Collated Magazine Attachment
- Illuminate dark work areas and increase visibility with the LED
-
Special Order Shipping
$270.99
Features
- 6.5 amp, 10,000 rpm motor provides power for working in the hardest woods
- Dual rack and pinion fence ensure blade and fence are always parallel for accurate joints every time
- Integral one-piece fence is adjustable and tilts 0-90°
- Flush cuts can be made at 0° without removing fence
- 45-degree locating notch in fence allows indexing off the outside surface of a mitered joint
-
Special Order Shipping
$2,843.99
Features
- High-performance brushless motor delivers FLEXVOLT® cordless power for long runtime in demanding applications without the hassles of power cords.
- Anti-rotation E-Clutch™ system is a Perform & Protect™ feature increases user control.
- 9.0AH oil-resistant glass-filled nylon battery housed in a latched and sealed battery box for added protection from cutting oils.
- Patent pending pipe clamp depth gauge for quick set up.
- Use clamp with die arm for no direct contact with die head to start threads.
-
Special Order Shipping
$2,173.99
Features
- High-performance brushless motor delivers FLEXVOLT® cordless power for long runtime in demanding applications without the hassles of power cords.
- Anti-rotation E-Clutch™ system is a Perform & Protect™ feature increases user control
- 9.0AH oil-resistant glass-filled nylon battery housed in a latched and sealed battery box for added protection from cutting oils.
- Patent pending pipe clamp depth gauge for quick set up.
- Use clamp with die arm for no direct contact with die head to start threads.
-
Free Shipping
$605.99
Features
- Delivers the power of a 15 AMP corded Reciprocating Saw
- Makita-built brushless motor delivers up to 40% faster cutting speed
- Anti-Vibration Technology (AVT®) is an internal counterbalance system delivers up to 50% less vibration
- Variable speed control dial (0-3,000 strokes per minute) enables user to match the speed to the application
- On/Off orbital feature provides more aggressive cuts in wood
-
Free Shipping
- DISCONTINUED
-
Free Shipping
- DISCONTINUED
-
SALE 4% OFF
Free Shipping
$412.99 Original price was: $412.99.$396.47Current price is: $396.47.
Features
- Drives 2,325 screws with Push Drive™ Technology using 18V LXT® 5.0Ah Battery*
- BL™ Motor delivers 0-4,000 RPM to handle a variety of drywall and framing applications
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener engages for more efficient battery usage and increased drywall installation
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
-
Free Shipping
$2,455.99
Features
- Makita GEC01PL Delivers the power of a 75.6cc Gas Saw
- Cuts up to 15 ft. in concrete and makes 115 cuts in #5 rebar on a single charge
- No Gas, No Fumes, No Pull-Starts, Zero Limitations
- Integrated Anti-Vibration mechanism provides up to 50% less vibration when cutting
- Active Feedback-sensing Technology (AFT®) electronically turns off the motor if rotation of wheel is suddenly forced to stop
- Electric brake allows the tool to be repositioned faster for maximum productivity
-
Free Shipping
$3,270.99
Features
- Makita 18V LXT® Lithium-Ion battery allows for complete cordless hole punching mobility without the hassles of a cord
- Punches up to (180) 25/32″ diameter holes in 15/64″ thick steel with a 5.0Ah 18V LXT® Battery
- Punch stop mechanism automatically retracts the die once a punch is complete to quickly continue operation
- Grip handle rotates 360° allowing for optimal positioning in a variety of spaces
- Adjustable depth guide allows for punch location adjustment up to 1-37/64″ (40 mm) from the edge of the workpiece
- Max metal plate thickness capacity of 5/16″ in general steel and 15/64″ in stainless steel
-
Free Shipping
$255.99
Features
- 600 RPM provides increased speed and torque for drilling large holes
- Heavy duty industrial 1/2″ drill chuck engineered for positive bit retention
- All-ball bearing construction for durability and longer tool life
- Rocker switch for quick transition between forward and reverse operation
- On-board chuck key storage for fast and convenient bit changes
