Showing 81–120 of 142 results
-
![GRV02L1](https://www.heydensupply.com/wp-content/uploads/2023/04/3236fafb-6c16-4a60-8dd9-efbaa141e03f_grv02l1_k_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/05/784ee8db-2d63-4a5a-8ef8-500362560c62_grv02z_a_1500px-600x600.jpg)
Free Shipping
$1,043.75
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
- Compact and ergonomic design at only 99″ long
- Weighs only 17.2 lbs. with battery for reduced operator fatigue
-
![MAC100QK1](https://www.heydensupply.com/wp-content/uploads/2023/03/5aaf6700-0abb-4a14-aa18-53dfc89dacb1_mac100qk1_k_1500px-600x600.jpg)
![MAC100QK1](https://www.heydensupply.com/wp-content/uploads/2023/03/01f5d0be-367f-4c4f-9e4e-2c451c27747a_af506_b_1500px-600x600.jpg)
Free Shipping
$336.25
Features
- Quiet Series compressor design at only 58 dB for operator and crew comfort; ideal for indoor use
- Compressor runs at a lower RPM (1,750) resulting in longer motor and pump life
- Complete roll-cage construction provides the compressor with protection to withstand a variety of job-site, transporting, and storage environments
- Oil-free dual-piston pump designed for maintenance-free operation
- Compressor features a lightweight design for increased job site portability, an oil-free dual-piston pump designed for maintenance-free operation, and a cord wrap for convenient AC power cord storage
-
![XNB02RJ](https://www.heydensupply.com/wp-content/uploads/2023/03/the-pc-600x600.jpg)
![XNB02RJ](https://www.heydensupply.com/wp-content/uploads/2023/03/a78bded4-8e18-4e6d-ba0c-b8b3249a5432_xnb02rj_a_1500px-600x600.jpg)
Free Shipping
$565.00
Features
- Powerful motor design drives standard 16 gauge, straight finish nails from 1″ to 2-1/2″ in length
- Compact center height enables viewing around the nose tip when fastening in tight spots
- Anti-dry fire mechanism engineered to help prevent driving blanks and damage to work surface
- Built-in L.E.D. light illuminates the work area
- Reversible belt clip allows the tool to remain close
-
![DCN660D1](https://www.heydensupply.com/wp-content/uploads/2023/03/2762e95e-c967-4812-8713-7975abb91a8c_7-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/03/567f7743-12fb-4f22-b755-1d195d962ac3_7-600x600.jpg)
Special Order Shipping
$433.91
Features
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
-
![DCN650D1](https://www.heydensupply.com/wp-content/uploads/2023/03/DCN650_K1-600x600.jpg)
![DCN650D1](https://www.heydensupply.com/wp-content/uploads/2023/03/DCN650_1-600x600.jpg)
Special Order Shipping
$433.91
Features
- Micro nose improves line of sight and accuracy of nail placement
- Brushless motor maximizes runtime and durability
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
-
![DCN890P2](https://www.heydensupply.com/wp-content/uploads/2023/03/f0d6fd7b-f649-4c89-a4c3-4b885dd7284a_7-600x600.jpg)
![DCN890P2](https://www.heydensupply.com/wp-content/uploads/2023/03/15e81399-cf3d-40dc-9c09-2f999aa73fe4_7-600x600.jpg)
Special Order Shipping
$997.00
Features
- Gas-free operation eliminates the need for fuel cells and provides a consistent, powerful alternative that operates on the DEWALT 20V MAX battery platform
- Variable power settings allow for pin depth adjustment and substrate versatility
- Field-serviceable driver blade reduces downtime of tool
- Comparable application speed to gas concrete nailers
- Dual LED worklights help illuminate work surface and provide onboard diagnostics
-
![DCE531M1](https://www.heydensupply.com/wp-content/uploads/2023/03/CC097F67-6F75-4162-9C35-F183DDDBADA5_7-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/03/35A2B5F5-E4BE-47C1-964B-62CD5776CB0B_7-600x600.jpg)
Special Order Shipping
$508.42
Features
- 1 – 1/8″ diameter vibrator delivers maximum consolidation power.
- 4 foot long flexible shaft for easy use and long reach.
- 14,000 VPM [under load] delivers maximum consolidation efficiency.
-
![Dewalt DCN680D1](https://www.heydensupply.com/wp-content/uploads/2023/03/59f1019e-7789-4ae7-9ed1-600e702cf782_7-600x600.jpg)
![DCN680D1](https://www.heydensupply.com/wp-content/uploads/2023/03/8de30167-37d7-4a7a-ab9f-caeddcf7f1e6_7-600x600.jpg)
Special Order Shipping
$323.51
Features
- Dewalt DCN680D1 is 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
-
![GAD02M1](https://www.heydensupply.com/wp-content/uploads/2023/03/d1102e66-7c6a-4c5d-8fed-a8a0baa44394_gad02m1_k_1500px-600x600.jpg)
![GAD02M1](https://www.heydensupply.com/wp-content/uploads/2023/03/d2b81324-e7f8-48e3-84ed-469a847df703_gad02m1_a_1500px-600x600.jpg)
Standard Shipping
$773.75
Features
- Makita built brushless motor with two speed, variable speed (0-400 RPM and 0-1,500 RPM) for maximum efficiency and a wide range of drilling applications
- Drills up to 6-1/4″ holes with hole saws and 4-5/8″ holes with self feed bits
- Weighs only 11.9 lbs. with battery and ergonomic design for operator comfort
- Torque limiter; built-in clutch reduces gear damage by disengaging gears if the bit binds
- Built-in L.E.D light with pre-glow and afterglow illuminates the work area
-
![DCH273H1](https://www.heydensupply.com/wp-content/uploads/2023/03/ec712493544bfe3f91edf3ae02ec4ed124be6e9d-600x600.jpg)
![DCH273H1](https://www.heydensupply.com/wp-content/uploads/2023/03/lg4kxb8eib7a96z55wx5-600x600.jpg)
Special Order Shipping
$500.91
Features
- Fast Drilling in Concrete With 2.1 joules of impact energy
- OSHA Table 1 Compliant when paired with DWH303DH on-board extractor
- Shocks Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature
- mechanism and brushless motor for efficient performance and runtime.
- Lightweight Design makes this tool ideal for rod hanging, seismic & safety attachments, cable tray & strut mounting, clamp mounting, and rail mounting.
-
![DCW210P1](https://www.heydensupply.com/wp-content/uploads/2023/03/7AE16F0F-8CD3-4A3F-85D1-D815FF136242_7-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/03/7AB85899-D781-48DD-866F-A17F0396B4DE_7-600x600.jpg)
Special Order Shipping
$286.11
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable speed control from 8,000 – 12,000 OPM to match the speed to the application.
- Low profile height allows user to get close to work surface for precise sanding.
- Replaceable 8-hole hook-and-loop sanding pad (DWE64233) for quick, easy paper changing.
- Dust-sealed switch to protect against dust ingestion for long switch life.
-
![DCS350D1](https://www.heydensupply.com/wp-content/uploads/2023/03/3fe5419c-5d9d-4cd8-9046-2ab9353f7564_7-600x600.jpg)
![DCS350D1](https://www.heydensupply.com/wp-content/uploads/2023/03/686206cf-b51b-4eb7-9553-3829dc7e63de_7-600x600.jpg)
Special Order Shipping
$418.00
Features
- Able to cut 1/4″, 3/8″, 1/2″ Mild Steel Coarse Threaded Rod
- Able to cut 1/4″, 3/8″ Stainless Steel Coarse Threaded Rod
- Clean, burr-free cuts allowing for easy threading
- Bright LED light to help illuminate cutting area
- Rotating cutter allows you to cut multiple sizes of rod with one cutting die
-
![GDT02D](https://www.heydensupply.com/wp-content/uploads/2023/03/3f502575-4452-47de-93ab-c5e6c9eb454f_gdt02d_k_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/03/1e4be126-67f4-4a34-bd11-40b1a943a3eb_gdt02z_f_1500px-600x600.jpg)
Free Shipping
$436.25
Features
- Makita-built brushless motor delivers 1,860 in.lbs. of Max Torque
- Digitally controlled mode, Tightening Mode (T-mode) for faster tightening of self-drilling screws; helps prevent damage to the screw or workpiece
- XPTâ„¢ is engineered to provide increased dust and water resistance in harsh job site conditions
- 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,400/ 0-2,600/ 0-3,600/ 0-4,100 IPM)
- Compact length at only 4-3/4″; ideal for working in tight spaces
-
![GTP01D1](https://www.heydensupply.com/wp-content/uploads/2023/03/7277d85b-f02e-4be5-a80a-1845be3078fd_gtp01d1_k_1500px-600x600.jpg)
![GTP01D1](https://www.heydensupply.com/wp-content/uploads/2023/03/5fcb50a5-648c-4b5b-9e8d-75801026a3e0_gtp01d1_a_1500px-600x600.jpg)
Free Shipping
$593.75
Features
- Makita-built brushless motor delivers up to 15% faster firing*
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- XPTâ„¢ is engineered to provide increased dust and water resistance in harsh job site conditions
- Refined firing mechanism reduces recoil; reduces force required on the work surface when driving pin nails
- Drives 6 different lengths, 5/8″, 11/16″, 3/4″, 1″, 1-3/16″ and 1-3/8″, of 23 gauge pin nails (tool does not work with 1-1/4″ pin nails)
-
![Makita GFD02D](https://www.heydensupply.com/wp-content/uploads/2023/03/56815b84-7b2c-4a9f-baea-8b8816ca8ba9_gfd02d_k_1500px-600x600.jpg)
![Makita GFD02D Makita GFD02D](https://www.heydensupply.com/wp-content/uploads/2023/03/fa6fc880-14dc-4eb8-bcb2-6874eb7855b7_gfd02d_a_1500px-600x600.jpg)
Free Shipping
$425.00
Features
- Makita-built brushless motor delivers 585 in.lbs. of Max Torque
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- XPTâ„¢ is engineered to provide increased dust and water resistance in harsh job site conditions
- The Makita GFD02D offers two speed settings (0-550 & 0-2,200 RPM)
- Compact length at only 6-11/16″; ideal for working in tight spaces
-
![DCS356SD1](https://www.heydensupply.com/wp-content/uploads/2023/03/DCS356SD1_K1-600x600.jpg)
Special Order Shipping
$222.06
Features
- The 3-speed selector allows users to choose their speed setting based on application
- Brushless motor delivers up to 57% more runtime over brushed
- Dual-Gripâ„¢ variable-speed trigger gives users ultimate speed and application control
- Universal accessory adapter makes it compatible with most oscillating tool accessory brands
- Quick-Changeâ„¢ accessory system allows blades and attachments to be changed quickly without wrenches
-
![XSJ05T](https://www.heydensupply.com/wp-content/uploads/2023/02/9c664d15-7761-4350-94f3-ed9c2329aaf3_xsj05t_k_1500px-600x600.jpg)
![XSJ05T](https://www.heydensupply.com/wp-content/uploads/2023/02/c2a91909-1a1c-4a7e-8a19-0c13345b0ebe_xsj05t_f_1500px-600x600.jpg)
Free Shipping
$651.25
Features
- Efficient cutting of up to 1/2″ thick cement board while producing less dust
- BLâ„¢ Brushless motor is designed to run cooler and more efficiently for longer life; delivers variable 0-3,000 SPM
- Tool-free shear head rotates 360° for increased comfort in various cutting positions
- Ergonomically designed rubberized D-handle is optimized to provide increased comfort on the job
- Cutting head is machined from precisely milled steel to ensure blades cut clean and straight
-
![DCS389X1](https://www.heydensupply.com/wp-content/uploads/2023/02/7E5807B0-E762-4CA9-9035-62D12337FE83_7-600x600.jpg)
![DCS389X1](https://www.heydensupply.com/wp-content/uploads/2023/02/688E337C-AD64-42C4-83A0-039349DE1A12_7-600x600.jpg)
Special Order Shipping
$366.26
Features
- Up to 19% more power vs the DCS388**
- Power of corded with the freedom of cordless
- 0 – 3000 SPM and 1-1/8 in. stroke length for fast and efficient cutting
- Keyless lever-action blade clamp for quick and easy blade changes
- Variable-speed trigger allows user to instantly control speed
-
![DCF620M2](https://www.heydensupply.com/wp-content/uploads/2023/02/2D48CCA2-9F2A-43F0-ACB4-002B7A0A0718_7-600x600.jpg)
![DCF620M2](https://www.heydensupply.com/wp-content/uploads/2023/02/33E4A217-2F1C-4369-955B-243E2C89DF04_7-600x600.jpg)
Special Order Shipping
$333.80
Features
- Greater speed than DW272 corded screwgun with up to 4,400 RPM
- DEWALT built brushless motor for efficient performance and runtime
- Nosecone locks on securely and is easily removed while maintaining consistent screw depth
- Compatible with the DCF6201 Collated Magazine Attachment
- Illuminate dark work areas and increase visibility with the LED
-
![D26960K](https://www.heydensupply.com/wp-content/uploads/2023/02/3E282AD8-3D9F-4C6E-BC2C-D47D62BF7996_7-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/34BD1214-CA33-44EB-9B38-D0C559CF75F1_7-600x600.jpg)
Special Order Shipping
$136.62
Features
- LCD display allows user to adjust temperature within 50-degree increments
- Built-in overload protection shuts the heating element down and prevents burn up
- Built-in hang ring adds a convenient storage feature
- Cord protector keeps the cord from tearing away from the housing
- Built-in innovative kickstand support provides greater stability and prevents tip over
-
![DW682K](https://www.heydensupply.com/wp-content/uploads/2023/02/8FB6BED3-AD29-40A6-BCE5-06427620C1FE_7-600x600.jpg)
![DW682K](https://www.heydensupply.com/wp-content/uploads/2023/02/44AF0A4D-CEF2-47CF-B640-413544A01D6B_7-600x600.jpg)
Special Order Shipping
$234.21
Features
- 6.5 amp, 10,000 rpm motor provides power for working in the hardest woods
- Dual rack and pinion fence ensure blade and fence are always parallel for accurate joints every time
- Integral one-piece fence is adjustable and tilts 0-90°
- Flush cuts can be made at 0° without removing fence
- 45-degree locating notch in fence allows indexing off the outside surface of a mitered joint
-
![DCE700X2K](https://www.heydensupply.com/wp-content/uploads/2023/02/0131D8F0-92CB-4CB6-9821-F7749C0F900F_7-600x600.jpg)
![DCE700X2K](https://www.heydensupply.com/wp-content/uploads/2023/02/E2A649DD-68FF-4C68-A3B4-6184989DC92B_7-600x600.jpg)
Special Order Shipping
$2,464.63
Features
- High-performance brushless motor delivers FLEXVOLT® cordless power for long runtime in demanding applications without the hassles of power cords.
- Anti-rotation E-Clutchâ„¢ system is a Perform & Protectâ„¢ feature increases user control.
- 9.0AH oil-resistant glass-filled nylon battery housed in a latched and sealed battery box for added protection from cutting oils.
- Patent pending pipe clamp depth gauge for quick set up.
- Use clamp with die arm for no direct contact with die head to start threads.
-
![DCE700X2](https://www.heydensupply.com/wp-content/uploads/2023/02/C9AEE6F1-BF34-45B1-89F8-626213B7506D_7-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/69174A9A-9419-4ED2-AD65-F0AB39666A39_7-600x600.jpg)
Special Order Shipping
$1,883.85
Features
- High-performance brushless motor delivers FLEXVOLT® cordless power for long runtime in demanding applications without the hassles of power cords.
- Anti-rotation E-Clutchâ„¢ system is a Perform & Protectâ„¢ feature increases user control
- 9.0AH oil-resistant glass-filled nylon battery housed in a latched and sealed battery box for added protection from cutting oils.
- Patent pending pipe clamp depth gauge for quick set up.
- Use clamp with die arm for no direct contact with die head to start threads.
-
![GRJ02M1](https://www.heydensupply.com/wp-content/uploads/2023/02/0e84499e-99d1-4c55-81ee-1a92ec6ee985_grj02m1_k_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/f6a7c94f-238e-4574-b329-abe49f405ed0_grj02m1_b_1500px-600x600.jpg)
Free Shipping
$530.00
Features
- Delivers the power of a 15 AMP corded Reciprocating Saw
- Makita-built brushless motor delivers up to 40% faster cutting speed
- Anti-Vibration Technology (AVT®) is an internal counterbalance system delivers up to 50% less vibration
- Variable speed control dial (0-3,000 strokes per minute) enables user to match the speed to the application
- On/Off orbital feature provides more aggressive cuts in wood
-
![XSF05T](https://www.heydensupply.com/wp-content/uploads/2023/02/1c23d463-e2a6-4a83-8d50-8b7fd35dd281_xsf05t_k_1500px-600x600.jpg)
![XSF05T](https://www.heydensupply.com/wp-content/uploads/2023/02/07b49fb2-e136-411b-b0bf-df3b4a5ec36b_xsf05t_f_1500px-600x600.jpg)
Free Shipping
$476.25
Features
- Brushless motor delivers 0-2,500 RPM with increased torque to handle high demand fastening applications
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power
- Depth adjustable nose piece delivers consistent screw drive performance
- The BLâ„¢ Brushless Motor eliminates carbon brushes, enabling the BLâ„¢ Motor to run cooler and more efficiently for longer life
- Efficient BLâ„¢ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
-
![XSF03TX2](https://www.heydensupply.com/wp-content/uploads/2023/02/3205f6c7-b7a2-41eb-8fc4-43c1e7dc3264_xsf03tx2_k_1500px-600x600.jpg)
![XSF03TX2](https://www.heydensupply.com/wp-content/uploads/2023/02/f9d6b1c9-1328-4b9d-8d5a-ec63b21a48f7_xsf03tx2_f_1500px-600x600.jpg)
Free Shipping
$434.75
Features
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener engages for longer run-time and motor noise reduction
- BLâ„¢ Motor delivers 0-4,000 RPM to handle a variety of drywall and framing applications
- The BLâ„¢ Brushless Motor eliminates carbon brushes, enabling the BLâ„¢ Motor to run cooler and more efficiently for longer life
- Included: Collated Screw Magazine with easy and reliable auto-feed capability is ideal for production drywall hanging
- Collated screw length capacity range from 1″ to 2-3/16″ for increased versatility
-
![XSF03T](https://www.heydensupply.com/wp-content/uploads/2023/02/08e06d58-a409-4c6d-ae93-024d47932c1a_xsf03t_k_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/26488c05-163d-4a34-acc1-8ea2b207a72f_xsf03t_f_1500px-600x600.jpg)
Free Shipping
$361.25
Features
- Drives 2,325 screws with Push Drive™ Technology using 18V LXT® 5.0Ah Battery*
- BLâ„¢ Motor delivers 0-4,000 RPM to handle a variety of drywall and framing applications
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener engages for more efficient battery usage and increased drywall installation
- The BLâ„¢ Brushless Motor eliminates carbon brushes, enabling the BLâ„¢ Motor to run cooler and more efficiently for longer life
- Efficient BLâ„¢ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
-
![Makita GEC01PL](https://www.heydensupply.com/wp-content/uploads/2023/02/e931e332-d5a0-4310-b2b0-bfc88f701eb5_gec01pl_k_1500px-600x600.jpg)
![GEC01PL](https://www.heydensupply.com/wp-content/uploads/2023/02/cc48598a-054c-431f-b6e8-eea77e8c41d9_gec01pl_f_1500px-600x600.jpg)
Free Shipping
$2,148.75
Features
- Makita GEC01PL Delivers the power of a 75.6cc Gas Saw
- Cuts up to 15 ft. in concrete and makes 115 cuts in #5 rebar on a single charge
- No Gas, No Fumes, No Pull-Starts, Zero Limitations
- Integrated Anti-Vibration mechanism provides up to 50% less vibration when cutting
- Active Feedback-sensing Technology (AFT®) electronically turns off the motor if rotation of wheel is suddenly forced to stop
- Electric brake allows the tool to be repositioned faster for maximum productivity
-
![XPP01T1K](https://www.heydensupply.com/wp-content/uploads/2023/02/7993a11d-525a-4b07-9a60-e9b380c838fb_xpp01t1k_k_1500px-600x600.jpg)
![XPP01T1K](https://www.heydensupply.com/wp-content/uploads/2023/02/f30f5c40-1a6b-4674-9a87-ac759f1c85f2_xpp01t1k_f_1500px-600x600.jpg)
Free Shipping
$2,687.50
Features
- Makita 18V LXT® Lithium-Ion battery allows for complete cordless hole punching mobility without the hassles of a cord
- Punches up to (180) 25/32″ diameter holes in 15/64″ thick steel with a 5.0Ah 18V LXT® Battery
- Punch stop mechanism automatically retracts the die once a punch is complete to quickly continue operation
- Grip handle rotates 360° allowing for optimal positioning in a variety of spaces
- Adjustable depth guide allows for punch location adjustment up to 1-37/64″ (40 mm) from the edge of the workpiece
- Max metal plate thickness capacity of 5/16″ in general steel and 15/64″ in stainless steel
-
![DS4011](https://www.heydensupply.com/wp-content/uploads/2023/02/424ea8d9-b37e-4f90-a497-3b03f22967ae_ds4011_p_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/72dfd60d-effd-4866-a15d-5485d360dfcb_ds4011_b_1500px-600x600.jpg)
Free Shipping
$223.75
Features
- 600 RPM provides increased speed and torque for drilling large holes
- Heavy duty industrial 1/2″ drill chuck engineered for positive bit retention
- All-ball bearing construction for durability and longer tool life
- Rocker switch for quick transition between forward and reverse operation
- On-board chuck key storage for fast and convenient bit changes
-
![XTW01PT](https://www.heydensupply.com/wp-content/uploads/2023/02/5160f738-dee0-438a-b790-5562e0bf7069_xtw01pt_k_1500px-600x600.jpg)
![5bb9d2db-c075-4565-a589-79b425e6fe29_xtw01pt_f_1500px](https://www.heydensupply.com/wp-content/uploads/2023/02/5bb9d2db-c075-4565-a589-79b425e6fe29_xtw01pt_f_1500px-1-600x600.jpg)
Free Shipping
$2,787.50
Features
- Two 18V LXT® Lithium-Ion batteries deliver the power and run time for corded demands without leaving the 18V LXT® platform
- Up to 14% faster fastening than Makita corded model 6922NB
- Tightens up to 315 M22 torque control bolts per charge using two LXT® 5.0Ah batteries
- Powerful BLâ„¢ Brushless motor delivers 593 ft.lbs. of torque to handle the most demanding applications
- Electric brake allows the tool to be repositioned faster for maximum productivity
-
![XTU02T](https://www.heydensupply.com/wp-content/uploads/2023/02/a2fc1479-1753-4745-8f26-8c9064a33c6e_xtu02t_k_1500px-600x600.jpg)
![](https://www.heydensupply.com/wp-content/uploads/2023/02/1273aced-3287-4230-a42c-c2255e8ca126_xtu02t_f_1500px-600x600.jpg)
Free Shipping
$490.00
Features
- Ideal for mixing drywall mud, plaster, drilling large holes and more
- Variable 2-speed design (0-350 RPM and 0-1,300 RPM) for optimum speed control and mixing versatility
- Variable speed trigger allows the operator to adjust speed to the material or application
- Soft start suppresses start-up reaction for better accuracy
- Extreme Protection Technology (XPTâ„¢) is engineered for improved dust and water resistance for operation in harsh conditions
-
![DWD181ZJ](https://www.heydensupply.com/wp-content/uploads/2023/02/9a52affd-9e67-4329-8045-75c1db2d2cec_dwd181zj_p_1500px-600x600.jpg)
![DWD181ZJ](https://www.heydensupply.com/wp-content/uploads/2023/02/5a69dc6a-8e97-4890-91b2-80af6e388b6f_dwd181_fc_1500px-1-600x600.jpg)
Free Shipping
$1,611.25
Features
- Quickly locates objects in multiple types of base materials to allow for immediate cutting, drilling, or coring for through penetrations
- Capable of detecting a variety embedded objects such as; metals (steel, aluminum, copper), wood, plastic and shielded electrical wire up to 7″ deep
- Selectable base material modes allow for increased versatility in dry concrete, wet concrete, wall partitions (wood or drywall) and hollow block
- Simplified user interface displays center, edge position, relative width and depth of embedded objects
- Multi-detection mode allows for scanning in up to three parallel surface positions; ideal for detecting objects running diagonally or detection affirmation
-
![DWD181R1J](https://www.heydensupply.com/wp-content/uploads/2023/02/2c5ae301-5b44-4430-8e7f-7b77c5bc5e79_dwd181r1j_k_1500px-600x600.jpg)
![DWD181R1J](https://www.heydensupply.com/wp-content/uploads/2023/02/5a69dc6a-8e97-4890-91b2-80af6e388b6f_dwd181_fc_1500px-600x600.jpg)
Free Shipping
$1,736.25
Features
- Quickly locates objects in multiple types of base materials to allow for immediate cutting, drilling, or coring for through penetrations
- Capable of detecting a variety embedded objects such as; metals (steel, aluminum, copper), wood, plastic and shielded electrical wire up to 7″ deep
- Selectable base material modes allow for increased versatility in dry concrete, wet concrete, wall partitions (wood or drywall) and hollow block
- Simplified user interface displays center, edge position, relative width and depth of embedded objects
- Multi-detection mode allows for scanning in up to three parallel surface positions; ideal for detecting objects running diagonally or detection affirmation
-
![XCS06T1](https://www.heydensupply.com/wp-content/uploads/2023/02/b1ff63b4-9f6b-4bfe-b339-1bdb1cfa1ddf_xcs06t1_k_1500px-600x600.jpg)
![XCS06T1](https://www.heydensupply.com/wp-content/uploads/2023/02/e935a220-6121-4e68-8fdd-26365ac9e655_xcs06t1_f_1500px-600x600.jpg)
Free Shipping
$1,448.75
Features
- Effortless cutting of up to #8 rebar or 1″ threaded rod; cuts up to an 1/8″ flush to the surface
- Carbide-tipped blade delivers clean burr-free cutting with minimal spark emission
- Automatic Speed Changeâ„¢ technology adjusts cutting speed and torque during cut for optimum performance
- Powerful BLâ„¢ Brushless Motor delivers 2,200 RPM for faster burr-free cutting
- The BLâ„¢ Brushless Motor eliminates carbon brushes, enabling the BLâ„¢ Motor to run cooler and more efficiently for longer life