Showing 281–320 of 331 resultsSorted by popularity
-

$12.99
Features:
- Sharp silicon carbide abrasive provides fast aggressive cutting action
- Versatile; stiff enough to provide aggressive removal, yet soft enough to prevent gouging and rework
- Open web construction design provides a cooler grinding/stripping action as a more robust option to wire brushes
- Extra coarse grit for removing parting lines and rust, and stripping coatings on aluminum, cast iron, concrete, fiberglass, composites, carbon steels, masonry, and natural stone
Minimum order quantity: 10
Order in multiples of: 10
-

$6.99
Features:
- Sharp coarse grit silicon carbide grain for asphalt, green concrete, asphalt over concrete, abrasive blocks, mortar and other abrasive materials
- Constructed with two full layers of reinforcing for lower-power machines, and light to medium applications where speed of cut is a primary selection criterion
- Patented Universal Arbor will allow a single blade to be run on saws with either 1 in. or 20mm arbors
- A good mix of value and consistent performance when initial price is another primary purchasing consideration
Minimum order quantity: 10
Order in multiples of: 10
-

$0.99
Features:
- Quality aluminum oxide abrasive and all-purpose bond provide consistent performance on a wide range of materials including 400 series stainless, and hard and soft carbon steels
- Ultra-thin reinforced straight wheel for cutting-off only applications on right angle grinder where minimum material loss is desired
- Full fiberglass reinforcement for straight, stable cuts
- Provides a good value; performance and economical initial price point are ideal for end user who needs to get the job done
Minimum order quantity: 25
Order in multiples of: 25
-

$6.99
Features:
- Market leading cutting speed now with an advanced aluminum oxide blend with more cutting points per unit area
- Up to twice the life and aggressive feel with a new active tough bond technology
- Versatile choice for cutting rebar, structural steel, pipe and sheet metal including hard and soft carbon steel and 400 series stainless
- First to market universal arbor allows a single blade to be run on saws with a 1 in. or 20mm arbor
Minimum order quantity: 10
Order in multiples of: 10
-

$4.99
Features:
- Market leading cutting speed now with an advanced aluminum oxide blend with more cutting points per unit area
- Up to twice the life and aggressive feel with a new active tough bond technology
- Versatile choice for cutting rebar, structural steel, pipe and sheet metal including hard and soft carbon steel and 400 series stainless
- First to market universal arbor allows a single blade to be run on saws with a 1 in. or 20mm arbor
Minimum order quantity: 10
Order in multiples of: 10
-

$2.99
Features:
- Sharp silicon carbide grain for penetration of very hard, non-metallic materials
- 1/4 inch thick depressed center wheel designed to be used at a 30 degree angle on a right angle grinder for offhand stock removal, smoothing welds ,and beveling on the bottom/face of the wheel
- Our ideal blend of wheel strength and smooth bond provide a good mix of cut rate and life
- Low initial price point is ideal for end user unable to measure performance
Minimum order quantity: 10
Order in multiples of: 10
-

$2.99
Features:
- Quality aluminum oxide for cutting all metals especially 300 and 400 series stainless, and hard and soft carbon steels
- Constructed with full fiberglass reinforcing for strength and stable cutting action
- DM (Diamond Mount) pop-out and 5/8 inch center hole combination to fit all popular circular saws
- A good mix of value and consistent performance for general purpose circular saw applications when initial price is a primary purchasing consideration
Minimum order quantity: 25
Order in multiples of: 25
-

$1.99
Features:
- Premium aluminum oxide grain and high-performance bond deliver fast cut and excellent wheel life
- Ultra-thin reinforced straight wheel for cutting-off only applications on right angle grinder for maximum cut rate with minimum kerf loss; ideal when precise, thin cut is desired
- Full fiberglass reinforcement for straight, stable cuts
- Ideal for cutting 400 series stainless, and hard and soft carbon steels
Minimum order quantity: 25
Order in multiples of: 25
-

$14.99
Features:
- Sharp silicon carbide abrasive provides fast aggressive cutting action
- Open web construction for minimal loading; great alternative to wire brushes
- Advanced resin bond prevents shedding, snagging, gouging, and rework
- Extra coarse grit for removing parting lines and rust, and stripping coatings on aluminum, cast iron, concrete, fiberglass, composites, carbon steels, masonry, and natural stone
Minimum order quantity: 10
Order in multiples of: 10
-

$4.99
Features:
- A blend of the most advanced zirconia alumina and premium aluminum oxide abrasives delivers 2 to 3 times the life of aluminum oxide wheels
- 1/4 inch thick depressed center wheel designed to be used at a 30 degree angle on a right angle grinder for light- to heavy-duty grinding on the bottom/face of the wheel
- Broad utility; from light-to heavy-pressure applications
- Excellent blend of performance and price on a wide range of materials, including 400 series stainless, hard carbon steels, and soft carbon steels
Minimum order quantity: 25
Order in multiples of: 25
-

$5.99
Features:
- New advanced aluminum oxide grain blend with more cutting points per unit area increasing cutting speed by 50 percent
- Up to twice the life and aggressive feel with a new active tough bond technology
- Versatile choice for cutting rebar, structural steel, pipe and sheet metal including hard and soft carbon steel and 400 series stainless
- First to market universal arbor allows a single blade to be run on saws with a 1 in. or 20mm arbor
Minimum order quantity: 10
Order in multiples of: 10
-

$5.99
Features:
- Sharp, coarse grit silicon carbide abrasive provides a economical cost solution for cutting brick, block, concrete on high-speed saws
- Available in two specifications: one for higher horsepower machines where additional durability is needed, and one for lower horsepower machines with a free cutting action
- The new patent pending Universal Arbor will allow a single blade to be run on saws with either 1 in or 20mm arbors
- Good choice for customers who are looking for alternative to a diamond blade
Minimum order quantity: 10
Order in multiples of: 10
-

$2.99
Features:
- Sharp coarse silicon carbide abrasive blend for fast cutting and long life on l masonry materials such as concrete, brick and asphalt circular saw applications
- Constructed with full fiberglass reinforcing for strength and stable cutting action
- DM (Diamond Mount) pop-out and 5/8 inch center hole combination to fit all popular circular saws
- A good mix of value and consistent performance for general purpose circular saw applications when initial price is a primary purchasing consideration
Minimum order quantity: 25
Order in multiples of: 25
-

$424.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-

$341.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-

$249.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-

$247.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-

$225.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-

$187.99
Features:
- Excellent blend of performance and price
- Laser welded segments for faster penetration
- Most aggressive drilling action for general-purpose and masonry applications
- 16 in. tube length to produce a 13 in. coring depth
-

$97.85
Features:
- FIRST-CUT Basic First-Cut Blades
-

$52.99
Features:
- FIRST-CUT Basic First-Cut Blades
-

$72.80
Features:
- Basic quality diamond and economical grinding value
-

$25.95
Features:
- Basic quality diamond and good cutting value
-

$10.86
Features:
- Basic quality diamond and good cutting value
-

$292.24
Features:
- Excellent footage and drilling speed
- Designed for all types of wet drilling in applications with light to moderate steel
- Very high quality diamond and longer coring life
-
20% OFF


$10.99 Original price was: $10.99.$8.84Current price is: $8.84.
Features
- 1 Diablo Blade performs like 5 standard blades
- 30% more cuts per battery charge in cordless saws versus other blades)
- Newly Enhanced Anti-Vibration design
- Perma-Shield Non-stick coating resists heat, gumming and corrosion
- Laser-Cut Thin kerf for less resistance and greater cutting efficiency

Minimum order quantity: 10
-


$8.79
Features:
- Up to 70% faster cutting compared to standard blades
- High grade Tungsten carbide tips for durability
- Blade coating provides reduced pitch build-up
- Reduced swing width
- Top bevel angle with 23° tip for a smoother cut

-

Features:
- Reaches a full charge in 45 minutes or less
- Provides up to 65% more run time per charge
- Battery delivers consistent power and run time in extreme temperatures to -4°F
- Battery resists self-discharge and remains ready for use even after long periods of storage
- Comes with 2 5.0Ah batteries, a rapid charger, and tool bag.

-

$50.99
Features:
- Extreme durability and longer life when digging into dirt, soil, hard clay and packed gravel
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Ideal for plumbers and landscapers when creating holes, tunnels and trenches
- Maximum performance in cordless and corded SDS-Max rotary hammer

-

$22.49
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition work, thin-set removal, cleaning concrete, and removing scale and rust
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Bracing ribs deliver superior stability and rigidity
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers

-

$15.59
Features:
- Extreme durability and longer life in concrete
- Ideal for general demolition work, adjustment work, restoring joints and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Unique Dual-Tooth jam-free design creates multi-directional fractures for faster rate of material removal
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers

-

$12.69
Features:
- Extreme durability and longer life in general demolition and clearing reinforcements
- A unique heat treatment process strengthens the chisel for impact resistance and stability
- Twist Point design resists jamming for faster chipping and material evacuation
- Self-Sharpening for increased productivity and longer life
- Maximum performance in cordless and corded SDS-Plus and SDS-Max rotary hammers

-

$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 12 Gauge
- -Lighted Receptacle Shows Power is On
- -40˚F to 140˚Fahrenheit
- Water/Weather Resistant
- 100 foot
- SJTW, 12/3 AWG
- 5-15 plug
- 5-15 receptacle
- 15 amp
- 1875 watts
- cULus Approval

-

$0.00
ADD TO CART & CHECK OUT TO REQUEST PRICE QUOTE. Once we receive your request, we will contact you with pricing for this product
- 12 Gauge
- -Lighted Receptacle Shows Power is On
- -40˚F to 140˚Fahrenheit
- Water/Weather Resistant
- 50 foot
- SJTW, 12/3 AWG
- 5-15 plug
- 5-15 receptacle
- 15 amp
- 1875 watts
- cULus Approval

-

$9.97
Features:
- Perma-shield coating protects the blade from heat, gumming, and corrosion
- 1 in. Demolition body for straighter cuts with less vibration
- Ultra hardened cutting edge for up to five times longer life than standard blades

-

$14.77
Features:
- High performance carbide for greater durability and cutting performance in thin metal
- Solid carbide creates full barrier to heat resistance for maximum durability
- Carbide strip teeth are milled to perfection for smoother quality cuts

-

$7.17
Features:
- Compatible with all corded and cordless reciprocating saws
- Ideal for cast iron cutting
- Up to 5x the Life of Standard Bi-Metal Blades

-

$15.95
Features:
- Perma-SHIELD coating protects the blade from heat, gumming, and corrosion
- Thick demolition blade body for extreme durability
- Ultra hardened edge increases the hardness of the cutting edge to a Rockwell Hardness of HRC 62 versus HRC 55 for standard blades

-

$23.99
Features:
- New Variable Tooth Design provides faster cuts with less vibration in nail-embedded wood
- High performance carbide for greater durability and cutting performance
- Enhanced carbide tip to blade connection for extreme impact resistance

-

$12.55
Features:
- 5x longer cutting performance
- Dual Tooth design features a double tooth configuration with small gullets for faster material removal and extra durability.
- Perma-shield coating protects the blade from heat, gumming, and corrosion
- 1 in Demolition body for straighter cuts with less vibration.
