Showing 561–600 of 945 resultsSorted by popularity
-
Free Shipping
$302.99
Features
- Sound pressure rating of 61 dB(A); measured per ANSI B 175.2 standard
- Makita-built motor produces a maximum air velocity of 120 MPH
- 6-stage air velocity/volume selection dial with variable speed control trigger
- Delivers up to 28 minutes of run time at 15,800 RPM using two 18V LXT® 5.0Ah batteries (batteries not included)
- Zero emissions and reduced maintenance; no need for gas or oil
-
Free Shipping
$328.99
Features
- Makita-built motor delivers 1,100 lbs. of dispensing force to dispense the highest viscosity adhesives and sealants
- 5 speed dial optimizes flow rate from 0-66 IPM
- Variable speed trigger allows user to match speed to the application
- 360° rotatable cartridge holder fits 10 oz. and 300 ml cartridges
- Drip-reduction feature automatically relieves pressure on the material when trigger is released to prevent unintentional dispensing
-
Free Shipping
$378.99
Features
- Makita-built motor delivers 1,100 lbs. of dispensing force to dispense the highest viscosity adhesives and sealants
- 5-speed dial optimizes flow rate from 0-66 IPM
- Variable speed trigger allows user to match speed to the application
- 360° rotatable cartridge holder fits 20 oz. cartridges, sausage packs and bulk caulk and adhesives
- Includes 3 pistons for use with cartridges, sausage packs and bulk materials
-
Free Shipping
$400.99
Features
- Drives a range of 18 gauge brad nails from 5/8″ to 2″; magazine capacity up to 100 nails
- Drives up to 1,660 finish nails using a 5.0Ah 18V LXT® Battery (battery not included)*
- 2-mode selector switch for control of nailing operation
- “Tool-less” depth adjustment for precise flush and countersink finish
- Anti-dry fire mechanism engineered to prevent driving blanks and damage to work surface
-
Free Shipping
$235.99
Features
- Brushless motor delivers 0-2,500 RPM with increased torque to handle high demand fastening applications
- Push Drive™ Technology – in lock-on mode the motor starts only when the fastener is engaged for a quieter work environment and to save battery power
- Depth adjustable nose piece delivers consistent screw fastening performance
- The BL Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
-
Free Shipping
$264.99
Features
- Quick-Shift Mode™ uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
- Brushless motor delivers 3,600 Max RPM and 1,600 in.lbs. of Max Torque
- 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,600 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-3,800 IPM) provides precise fastening control for a wide range of applications
- Additional one-touch 4-speed power selector button under the chuck for added convenience
- Assist Mode (A-mode) feature helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins
-
Free Shipping
$730.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Constant speed control automatically applies additional power under load for optimum performance
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears during a bind-up situation
- XGT® technology delivers up to 135 of 3/8″ holes per charge using full charged 40V XGT® 4.0Ah battery*
- Quick change chuck allows for interchangeability from SDS-PLUS to 1/2″ keyless chuck for utilization of straight shank bits
-
Free Shipping
$854.99
Features
- X2 LXT® technology delivers up to 140 1/2″ x 2-3/8″ holes per charge using two 18V LXT® 5.0Ah batteries
- Powerful BL™ Brushless motor delivers 0-980 RPM, 0-5,000 BPM and 2.3 ft.lbs. of impact energy to handle the most demanding applications
- Dust extraction capability with optional OSHA Table 1 compliant On-Board Dust Extractor Attachment
- Anti-Vibration Technology (AVT®) is an active internal counterbalance system which is engineered to reduce vibration for increased comfort
- Vibration-absorbing back handle and side handle further reduce vibration and increase comfort on the job
-
Free Shipping
$435.99
Features
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Compact and ergonomic design at only 12-7/8″ long
- Weighs only 7.2 lbs. with battery (battery not included) for reduced operator fatigue
- Variable speed trigger enables user to match the speed to application for greater versatility
-
Free Shipping
$228.99
Features
- Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM
- 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Faster drilling with synchronized RPM and BPM
- Job site tested shock absorbent handle protects the battery housing for extra durability
-
Free Shipping
$501.99
Features
- Makita- build brushless motor delivers up to 35% faster cutting speed
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- Metal reinforced gear shaft and self-lubricating slider for increased durability
- Makita-built variable 2-speed brushless motor delivers 0-2,300 (Low) and 0-3,000 (High) strokes per minute
- Long 1-1/4″ stroke length provides increased cutting efficiency
-
Free Shipping
$502.99
Features
- Powered by two LXT batteries; X2 LXT technology delivers more power, speed and run time without the hassles of a cord
- Makita-built electronically controlled brushless motor delivers 5,100 RPM for maximum performance and 50% longer run time per charge
- The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life
- Automatic Speed Change™ technology adjusts cutting speed and torque during cut for optimum performance
- X2 LXT technology delivers up to 558 crosscuts per charge in 2×4 SPF lumber and up to 291 crosscuts per charge in 2×10 SPF lumber using the two 5.0Ah batteries
XSR01PT Tech sheet
-
Free Shipping
$637.99
Features
- Selectable horizontal/vertical cross reference lines required for level, align and plumb applications
- Up to 10 hours of continuous run time using included Makita 12V max CXT® 2.0Ah rechargeable battery; up to 20 hours of continuous run time using a 12V max CXT® 4.0Ah battery
- Green line visibility range up to 115’ depending on ambient light and detectable up to 262′ with Makita Laser Detector LE00855702 (sold separately)
- Bright 525 nm class II green laser for best-in-class visibility with +/-1/8” at 33’ for best-in-class accuracy
- Laser line fan angle spans past the 180° horizontal line and 160° vertical line positions for full reference line coverage
-
Standard Shipping
$197.99
Features
- Equipped with Bluetooth® to wirelessly connect your mobile device
- Lantern delivers up to 310 lumens in a 360° pattern
- High-luminance L.E.D. flashlight provides 200 lumens
- Push-button operated digital tuner with 9 programmable stations for FM radio
- Radio runs up to 28 hours; Lantern runs 16 hours; Lantern and Radio run 10 hours with an 40V max XGT® 2.5Ah battery (battery not included)
-
Standard Shipping
$178.99
Features
- 4-mode operation: delivering 600 lumens on Spot, 1,000 lumens on Flood, 1,250 lumens on Spot/Flood, and Strobe mode
- Illuminates up to 640 yards in Spot and Spot/Flood mode
- Up to 10 hours of continuous illumination in Spot mode with 4.0Ah 40V max XGT® battery (battery not included)
- 90º pivoting head for user convenience
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
-
Standard Shipping
$120.99
Features
- High-luminance 18 L.E.D. flashlight provides 500 lumens on high
- 3-mode operation: delivers 500 lumens on High, 250 lumens on Medium, and 100 lumens on Low
- Flashlight head folds up and down with 7 positive stops and rotates left to right for multiple lighting angles
- Up to 82 hours of illumination with 4.0Ah 40V max XGT® Battery (battery sold separately)
- Up to 51 hours of illumination with 2.5Ah 40V max XGT® Battery (battery sold separately)
-
Standard Shipping
$72.99
Features
- High-luminance 4 L.E.D. flashlight provides 160 lumens
- 170° pivoting head with 12 positive stops
- Up to 55 hours of illumination with 4.0Ah 40V max XGT® Battery (battery sold separately)
- Up to 34 hours of illumination with 2.5Ah 40V max XGT® Battery (battery sold separately)
- Metal hang hook is convenient and job site durable
-
Standard Shipping
$97.99
Features
- 360° lantern mode provides 710 lumens; 180° lantern mode provides 340 lumens; flashlight mode provides 130 lumens
- Built-in USB port for charging portable electronic devices
- Metal hang hook swivels 360° and folds away for added convenience
- Up to 10 hours of continuous illumination in 360° lantern mode with 2.5Ah 40V max XGT® Battery (battery sold separately)
- Up to 18 hours of continuous illumination in 180° lantern mode with 2.5Ah 40V max XGT® Battery (battery sold separately)
-
Free Shipping
$435.99
Features
- 3-mode operation: delivers 10,000 lumens on High, 4,000 lumens on medium, and 2,000 lumens on Low
- Up to 2.4 hours of continuous illumination with two 4.0Ah 40V max XGT® batteries on high (batteries and charger not included)
- Up to 14 hours of continuous illumination with two 4.0Ah 40V max XGT® batteries on low (batteries and charger not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
Free Shipping
$271.99
Features
- 3-mode operation: delivers 3,600 lumens on High, 1,800 lumens on Medium, and 900 lumens on Low
- Up to 3.5 hours of continuous illumination with a 4.0Ah 40V max XGT® battery on high (battery and charger not included)
- Up to 15 hours of continuous illumination with a 4.0Ah 40V max XGT® battery on low (battery and charger not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
- L.E.D. lights effectively illuminate work area without the high heat of halogens
-
Free Shipping
$212.99
Features
- 2-mode operation: delivers 1,100 lumens on High and 450 lumens on Low
- Up to 22 hours of continuous illumination on low with a 4.0Ah 40V max XGT® (battery and charger not included)
- Up to 10 hours of continuous illumination on high with a 4.0Ah 40V max XGT® (battery and charger not included)
- Compatible with Makita® 40V max XGT® and 18V LXT® batteries (batteries not included)
- Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions
-
Free Shipping
$920.99
Features
- Makita-built brushless motor delivers up to 2X faster cutting performance*
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
- XPT is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Large 2-5/8″ cutting capacity in various metal materials including pipe, stud, channel, strut, conduit, angle, square tubing, sheet metal, and more
- Makita-built brushless motor delivers up to 160 cuts per charge in 2-1/2″ x 2-1/2′ x 1/4″ steel angle using a 40V max XGT® 4.0Ah Battery
-
Free Shipping
$655.99
Features
- Makita-built brushless motor delivers up to 2X faster cutting performance*
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of blade is suddenly forced to stop
- XPT is engineered to provide increased dust and water resistance in harsh job site conditions
- Large 2-5/8″ cutting capacity in various metal materials including pipe, stud, channel, strut, conduit, angle, square tubing, sheet metal, and more
- Makita-built brushless motor delivers up to 160 cuts per charge in 2-1/2″ x 2-1/2′ x 1/4″ steel angle using a 40V max XGT® 4.0Ah Battery (battery not included)
-
Free Shipping
$898.99
Features
- Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM) provides 1,950 in.lbs. of Max Torque
- 7-1/4″ Circular Saw Makita-built brushless motor delivers 6,000 RPM for faster cutting and ripping; cuts 2-5/8″ at 90°
- High-luminance 4 L.E.D. flashlight provides 160 lumens
- XPT is engineered to provide increased dust and water resistance in harsh job site conditions
-
Free Shipping
$462.99
Features
- Makita-built brushless motor delivers 4,000 RPM for up to 2X faster cutting than corded
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Extra Large 3-3/4″ cutting capacity at 90°; cuts 4X material in a single pass
- Up to 150 cuts per charge in 4×4 SPF lumber on a single charge of a 4.0Ah battery (battery not included)
-
Free Shipping
$672.99
Features
- Makita-built brushless motor delivers 4,000 RPM for faster cutting than corded
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Extra Large 3-3/4″ cutting capacity at 90°; cuts 4X material in a single pass
- Up to 150 cuts per charge in 4×4 SPF lumber on a single charge of a 4.0Ah battery
-
Free Shipping
$324.99
Features
- Makita-built brushless motor delivers up to 6,400 RPM for faster cutting performance
- Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Up to 375 cuts per charge in 2X4 SPF lumber (battery no included)
- Power of a 15 AMP corded*
-
Free Shipping
$527.99
Features
- delivers up to 6,400 RPM for faster cutting performance
- adjusts cutting speed under load for optimum cutting performance
- increased dust and water resistance
- cutting depth allows cutting of 3X lumber in a single pass
- Electric brake
GSR01M1 Instruction Manual
-
Free Shipping
$457.99
Features
- Makita-built brushless motor delivers 6,000 RPM for faster cutting performance
- Automatic torque drive adjusts cutting speed under load for optimum cutting performance
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- 0-56° bevel capacity with positive stops at 22.5°, 45°
- Large 2-3/8″ cutting capacity at 90°
-
Free Shipping
$324.99
Features
- Makita-built brushless motor delivers 6,000 RPM for faster cutting performance
- Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Large 2-5/8″ cutting capacity at 90°; cuts 3X material in a single pass
- 0-56° bevel capacity with positive stops at 22.5°, 45°, and 56°
-
Free Shipping
$681.99
Features
- Makita-built brushless motor delivers 6,000 RPM for faster cutting performance
- Automatic torque drive adjusts cutting speed under load for optimum cutting performance
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- 0-56° bevel capacity with positive stops at 22.5°, 45°
- Large 2-3/8″ cutting capacity at 90°
-
Free Shipping
$538.99
Features
- Makita-built brushless motor with variable speed control dial (2,500 – 4,900 RPM) for faster cutting performance
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- Large cutting capacity 2-3/16″ at 90º; and 1-9/16″ at 45º
- Bevel capability (-1º to 48º) with positive stops at 22.5º and 45º
-
Free Shipping
$802.99
Features
- Makita-built brushless motor with variable speed control dial (2,500 – 4,900 RPM) for faster cutting performance
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- Large cutting capacity 2-3/16″ at 90º; and 1-9/16″ at 45º
- Bevel capability (-1º to 48º) with positive stops at 22.5º and 45º
-
Free Shipping
$714.99
Features
- Makita-built brushless motor delivers 3,500 RPM for faster cutting performance
- Constant speed control automatically applies additional power under load for optimum performance
- XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Bevel cut capacity up to 1° left and 60° right with positive stops at 22.5°, 45°
- Large 3-13/16″ cutting capacity at 90°
-
Free Shipping
$700.99
Features
- Outpower: Makita-built brushless motor delivers 4,000 RPM for faster cutting performance
- Outsmart: Constant speed control automatically applies additional power under load for optimum performance
- Outlast: XPT™ is engineered to provide increased dust and water resistance in harsh jobsite conditions
- Bevel cut capacity up to 1° left and 60° right with positive stops at 22.5°, 45°
- Large 3-3/8″ cutting capacity at 90°
-
Free Shipping
$527.99
Features
- 12 AMP motor with variable speed control dial (2,000 – 5,200 RPM) for optimum performance in a variety of materials
- Large cutting capacity (2-3/16″ at 90° and 1-9/16″ at 45°)
- Bevel capability (-1 to 48°) with positive stops at 22.5° and 45°
- Close to the wall cutting (11/16″) for expanded cutting applications
- Ideal for cutting large wood panels and other wood materials in confined areas
SP6000J Instruction Manual
-
Free Shipping
$202.99
Features
- Hypoid gears deliver more power and have greater surface contact than conventional worm drive gears
- Powerful 15 AMP motor for increased productivity
- Oil bath technology and sealed gear housing for less maintenance
- 0°-51.5° bevel capacity with positive stops at 45° and 51.5° is ideal for truss and rafter cut-outs
- High quality, heat treated hypoid gears are engineered for long lasting performance
-
Free Shipping
$1,292.99
Features
- Makita 5402NA features a powerful 15 AMP motor and delivers 2,300 RPM for enough power to cut through pressure treated lumber
- Cuts 6x material at 90° and 4x material at 45° in a single pass
- Weighs only 32.1 lbs. for increased operator comfort
- Electric brake for maximum productivity
- Ideal for cutting large timber, pressure treated lumber and wood logs
-
Free Shipping
$821.99
Features
- Powerful 14 AMP motor delivers 3,800 RPM with power to cut beams and timber
- Well balanced and weighs only 20.3 lbs. for increased operator comfort
- Precision gearing with ball and needle bearing construction for smooth and efficient power transmission
- Electric brake for maximum productivity
- Large cutting and bevel capacity (3-3/4″ at 90° and 2-3/4″ at 45°)
-
Free Shipping
$341.99
Features
- Magnesium components create a lightweight saw (11.4 lbs.) that is well balanced and job site tough
- Large cutting capacity (3″ at 90°) and bevel capacity (0°-50°) with positive stops at 22.5° and 45°
- Two built-in L.E.D. lights illuminate the line of cut for increased accuracy
- Electric brake for maximum productivity
- Powerful 15.0 AMP motor delivers 5,200 RPM for proven performance
