Showing 521–560 of 945 resultsSorted by popularity
-
Free Shipping
$1,785.99
Features
- Delivers the power of a 75.6cc Gas Saw
- Cuts up to 15 ft. in concrete and makes 115 cuts in #5 rebar on a single charge
- No Gas, No Fumes, No Pull-Starts, Zero Limitations
- Integrated Anti-Vibration mechanism provides up to 50% less vibration when cutting
- Active Feedback-sensing Technology (AFT®) electronically turns off the motor if rotation of wheel is suddenly forced to stop
- Electric brake allows the tool to be repositioned faster for maximum productivity and efficiency
-
Free Shipping
$3,112.99
Features
- Makita 18V LXT® Lithium-Ion battery allows for complete cordless hole punching mobility without the hassles of a cord
- Punches up to (180) 25/32″ diameter holes in 1/4″ thick steel with a 5.0Ah 18V LXT® Battery (battery not included)*
- Punch stop mechanism automatically retracts the die once a punch is complete to quickly continue operation
- Grip handle rotates 360° allowing for optimal positioning in a variety of spaces
- Adjustable depth guide allows for punch location adjustment up to 1-37/64″ (40 mm) from the edge of the workpiece
- Max metal plate thickness capacity of 5/16″ in general steel and 15/64″ in stainless steel
-
Free Shipping
$3,270.99
Features
- Makita 18V LXT® Lithium-Ion battery allows for complete cordless hole punching mobility without the hassles of a cord
- Punches up to (180) 25/32″ diameter holes in 15/64″ thick steel with a 5.0Ah 18V LXT® Battery
- Punch stop mechanism automatically retracts the die once a punch is complete to quickly continue operation
- Grip handle rotates 360° allowing for optimal positioning in a variety of spaces
- Adjustable depth guide allows for punch location adjustment up to 1-37/64″ (40 mm) from the edge of the workpiece
- Max metal plate thickness capacity of 5/16″ in general steel and 15/64″ in stainless steel
-
Free Shipping
$705.99
Features
- Selectable horizontal/vertical cross reference lines plus 4-point required for level, align, plumb and square applications
- Makita 12V max CXT® 4.0Ah rechargeable battery provides up to 20 hours of continuous run time (battery not included)
- Green line visibility range up to 115’ depending on ambient light and detectable up to 262′ with Makita Laser Detector
- Bright 525 nm class II green laser for best-in-class visibility with +/-1/8” at 33’ for best-in-class accuracy
- Laser line fan angle spans past the 180° horizontal line and 170° vertical line positions for full reference line coverage
-
Free Shipping
$264.99
Features
- Capable of detecting horizontal and vertical laser lines up to a distance of 262 feet
- Rubberized housing over-mold for increased protection
- Dual front and rear display for added convenience
- Top-mounted magnets for attachment to metal surfaces
- Dust and water resistance with IP 65 protection rating for increased durability
-
Free Shipping
$438.99
Features
- Selectable horizontal/vertical cross reference lines plus 4-point required for level, align, plumb and square applications
- Makita 12V max CXT® 4.0Ah rechargeable battery provides up to 40 hours of continuous run time (battery not included)
- Red line visibility range up to 82’ depending on ambient light and detectable up to 262′ with Makita Laser Detector LE00855702 (sold separately)
- Bright 635 nm class II red laser with +/-1/8” at 33’ for best-in-class accuracy
- Laser line fan angle spans past the 180° horizontal line and 170° vertical line positions for full reference line coverage
-
Free Shipping
$1,210.99
Features
- Makita 12V max CXT® 4.0Ah rechargeable battery provides up to 40 hours of continuous run time (battery not included)
- Selectable one horizontal, two vertical reference lines and plumb point required for level, align, plumb and square applications
- Best-in-class accuracy of +/-1/16” at 33’
- Bright 515 nm class II laser for best-in-class visibility
- Fast self-leveling line stability is achieved in up to 3 seconds for increased productivity
-
Free Shipping
$292.99
Features
- Variable speed (0 – 600 RPM) for mixing and drilling in a wide variety of materials
- Forward and reverse lever for operator convenience
- Well-balanced design at only 6.2 lbs. for reduced operator fatigue
- D-handle rotates 360° with 24 detent stops for multi-position operation
- Rubberized grip for increased operator comfort
-
Free Shipping
$255.99
Features
- 600 RPM provides increased speed and torque for drilling large holes
- Heavy duty industrial 1/2″ drill chuck engineered for positive bit retention
- All-ball bearing construction for durability and longer tool life
- Rocker switch for quick transition between forward and reverse operation
- On-board chuck key storage for fast and convenient bit changes
-
Free Shipping
$3,375.99
Features
- Two 18V LXT® Lithium-Ion batteries deliver the power and run time for corded demands without leaving the 18V LXT® platform
- Up to 14% faster fastening than Makita corded model 6922NB
- Tightens up to 315 M22 torque control bolts per charge using two LXT® 5.0Ah batteries
- Powerful BL™ Brushless motor delivers 593 ft.lbs. of torque to handle the most demanding applications
- Electric brake allows the tool to be repositioned faster for maximum productivity
-
Free Shipping
$3,055.99
Features
- Two 18V LXT® Lithium-Ion batteries deliver the power and run time for corded demands without leaving the 18V LXT® platform (batteries not included)
- Up to 14% faster fastening than Makita corded model 6922NB
- Tightens up to 315 M22 torque control bolts per charge using two LXT® 5.0Ah batteries (batteries not included)
- Powerful BL™ Brushless motor delivers 593 ft.lbs. of torque to handle the most demanding applications
- Electric brake allows the tool to be repositioned faster for maximum productivity
-
Free Shipping
$560.99
Features
- Ideal for mixing drywall mud, plaster, drilling large holes and more
- Variable 2-speed design (0-350 RPM and 0-1,300 RPM) for optimum speed control and mixing versatility
- Variable speed trigger allows the operator to adjust speed to the material or application
- Soft start suppresses start-up reaction for better accuracy
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
-
Free Shipping
$318.99
Features
- Ideal for mixing drywall mud, plaster, drilling large holes and more
- Variable 2-speed design (0-350 RPM and 0-1,300 RPM) for optimum speed control and mixing versatility
- Variable speed trigger allows the operator to adjust speed to the material or application
- Soft start suppresses start-up reaction for better accuracy
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
-
Free Shipping
$645.99
Features
- Makita built brushless motor with two speed, variable speed (0-400 RPM and 0-1,500 RPM) for maximum efficiency and a wide range of drilling applications
- Drills up to 6-1/4″ holes with hole saws and 4-5/8″ holes with self feed bits
- Weighs only 11.9 lbs. with battery and ergonomic design for operator comfort (battery not included)
- Torque limiter; built-in clutch reduces gear damage by disengaging gears if the bit binds
- Built-in L.E.D light with pre-glow and afterglow illuminates the work area
-
Free Shipping
$645.99
Features
- Makita built brushless motor with two speed, variable speed (0-400 RPM and 0-1,500 RPM) for maximum efficiency and a wide range of drilling applications
- Drills up to 6-1/4″ holes with hole saws and 4-5/8″ holes with self feed bits
- Weighs only 12.8 lbs. with battery and ergonomic design for operator comfort (battery not included)
- Torque limiter; built-in clutch reduces gear damage by disengaging gears if the bit binds
- Built-in L.E.D light with pre-glow and afterglow illuminates the work area
-
Oversized - Special Order
$1,206.25
Features
- Up to 100 minutes of run time with two 18V LXT® 5.0Ah batteries (batteries sold separately)
- Powered by (1) 18V LXT® battery with the option to insert (1) additional battery for extended run time (batteries sold separately)
- Makita-built brushless motor for optimal performance
- 290 lbs. maximum load capacity
- Large knobs for easy extension of front and side rails
-
Free Shipping
$445.99
Features
- Powerful motor delivers up to 10,000 PSI of Max pressure
- Features two speed modes; Low and Auto-Speed for better control
- Auto-Speed mode applies grease while varying the flow rate automatically matching the resistance of the part being greased
- Variable speed trigger allows the user to adjust discharge rate
- Lock-on button for user convenience during longer work periods
-
Free Shipping
$324.99
Features
- Powerful motor delivers up to 10,000 PSI of Max pressure
- Features two speed modes; Low and Auto-Speed for better control
- Auto-Speed mode applies grease while varying the flow rate automatically matching the resistance of the part being greased
- Variable speed trigger allows the user to adjust discharge rate
- Lock-on button for user convenience during longer work periods
-
Free Shipping
$1,841.99
Features
- Quickly locates objects in multiple types of base materials to allow for immediate cutting, drilling, or coring for through penetrations
- Capable of detecting a variety embedded objects such as; metals (steel, aluminum, copper), wood, plastic and shielded electrical wire up to 7″ deep
- Selectable base material modes allow for increased versatility in dry concrete, wet concrete, wall partitions (wood or drywall) and hollow block
- Simplified user interface displays center, edge position, relative width and depth of embedded objects
- Multi-detection mode allows for scanning in up to three parallel surface positions; ideal for detecting objects running diagonally or detection affirmation
-
Free Shipping
$1,127.99
Features
- Powerful 14 AMP motor delivers 18.8 ft.lbs. of impact energy to handle the most demanding applications
- Anti-Vibration Technology (AVT®) is an internal counterbalance system that greatly reduces vibration
- Additional vibration-absorbing rear handle is spring-loaded to further reduce vibration
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more precision and better accuracy
-
Free Shipping
$707.99
Features
- HM0871C features a owerful 10 AMP motor delivers 8.6 ft.lbs. of impact energy
- Additional vibration-absorbing rear handle is spring-loaded to further reduce vibration
- Soft start suppresses start-up reaction for better accuracy
HM0871C Instruction Manual
-
Free Shipping
$654.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver up to 20% faster breaking efficiency than corded equivalent model*
- Constant speed control automatically applies additional power under load for optimum performance
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
- Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
-
Free Shipping
$546.25
This item has been DISCONTINUED.
-
Free Shipping
$337.99
Features
- The Makita XWT18Z BL™ Brushless Motor delivers 520 ft.lbs. of Fastening Torque and 740 ft.lbs. of Nut-Busting Torque
- Compact and ergonomic design at only 6-11/16″ long
- 4-speed power selection switch (0-500 / 0-1,200 / 0-1,900 / 0-2,200 RPM & 0-1,000 / 0-1,700 / 0-2,400 / 0-2,700 IPM) for precise fastening control in a wide range of applications
- 3 forward and 3 reverse Auto-Stop modes for increased efficiency
- Full speed mode function reduces trigger pull to reach full speed
-
Free Shipping
$424.99
Features
- BL™ Brushless Motor delivers 780 ft.lbs. of Fastening Torque and 1,250 ft.lbs. of Nut-Busting Torque
- 3-speed power selection switch (0-900/ 0-1,000/ 0-1,800 RPM & 0-1,800/ 0-2,000/ 0-2,200 IPM) provides precise fastening control for a wide range of applications
- 3/4″ anvil with friction ring and thru hole retention system for maximum productivity
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
-
Free Shipping
$1,612.99
Features
- Makita-built brushless motor along with two 40V max XGT® batteries combine to deliver up to 27% faster drilling performance than corded equivalent model*
- Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
-
Free Shipping
$870.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
-
Free Shipping
$1,984.99
Features
- Quickly locates objects in multiple types of base materials to allow for immediate cutting, drilling, or coring for through penetrations
- Capable of detecting a variety embedded objects such as; metals (steel, aluminum, copper), wood, plastic and shielded electrical wire up to 7″ deep
- Selectable base material modes allow for increased versatility in dry concrete, wet concrete, wall partitions (wood or drywall) and hollow block
- Simplified user interface displays center, edge position, relative width and depth of embedded objects
- Multi-detection mode allows for scanning in up to three parallel surface positions; ideal for detecting objects running diagonally or detection affirmation
-
Free Shipping
$289.99
Features
- Makita-built brushless motor delivers up to 565 CFM and 143 MPH
- Move heavy debris with turbo boost mode
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- Up to 44% more blowing force than a 24.5cc gas blower
- Turbo boost mode delivers 565 CFM for heavy debris
-
Free Shipping
$485.99
Features
- Makita-built motor delivers 12,500 VPM to help increase strength of concrete
- Dual-directional switch to conveniently hold the tool in either horizontal or vertical positions
- Up to 25 minute run time under load with 3.0Ah LXT® battery (battery not included)
- Compact and ergonomic design at only 105-1/2″ long
- Weighs only 11.4 lbs. with battery for reduced operator fatigue (battery not included)
-
Free Shipping
$485.99
Features
- Makita-built motor delivers 13,000 VPM to help increase strength of concrete
- Dual-directional switch to conveniently hold the tool in either horizontal or vertical positions
- Up to 25 minute run time under load
- Compact and ergonomic design at only 58-1/2″ long
- Weighs only 7.7 lbs. with battery (battery not included) for reduced operator fatigue
-
Free Shipping
$488.99
Features
- Two 18V LXT® Lithium-Ion batteries deliver the power and run time for corded demands without leaving the 18V LXT® platform (batteries not included)
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life; delivers 3,800 RPM
- Large spark guard captures and deflects debris away from the surrounding area
- Electric brake allows adjustments to be completed faster for maximum productivity
- “Tool-less” flange removal for quick and easy wheel changes
-
Free Shipping
$241.99
Features
- X-LOCK quick change system allows for tool-free wheel changes with simple snap-on mounting and pull release lever for change-out
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life; delivers 8,500 RPM
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
- Electric Brake stops the grinding or cut-off wheel in 2 seconds or less for maximum productivity
- Automatic Speed Change™ technology adjusts speed and torque during operation for optimum performance
-
Free Shipping
$1,655.99
Features
- Effortless cutting of up to #8 rebar or 1″ threaded rod; cuts up to an 1/8″ flush to the surface
- Carbide-tipped blade delivers clean burr-free cutting with minimal spark emission
- Automatic Speed Change™ technology adjusts cutting speed and torque during cut for optimum performance
- Powerful BL™ Brushless Motor delivers 2,200 RPM for faster burr-free cutting
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
-
Free Shipping
$2,655.99
Features
- Performs up to 233 cuts of #5 rebar with one 18V LXT® 5.0Ah Battery
- Cutting capacity range of 1/8″- 5/8″
- Spark free cutting of rebar and steel rod
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- Fast and effortless cutting speed of #5 rebar in 2.8 seconds
-
Free Shipping
$2,855.99
Features
- Up to 125 cuts of #6 (3/4″) rebar on a single charge using 5.0Ah LXT® Battery
- Cutting capacity range of 1/8″- 3/4″; cuts up to 60 grade #6 rebar
- 4-way rotatable cutting blade makes up to 4,000 cuts of #3 (3/8″) rebar before needing to be replaced
- Cutting head rotates 360° for different cutting positions
- Adjustable stopper holds the rebar at 90° to the cutting blade and assists in smooth cutting
