Simpson Strong-Tie SET-XP22-N 22-oz. High-Strength Epoxy Adhesive Cartridge with Nozzle
Standard Shipping
$52.89This item has been DISCONTINUED.
- SEE SET3G22-N FOR UPDATED MODEL
Showing 841–880 of 895 resultsSorted by popularity
-
-
Simpson Strong-Tie MP36 MP 3 in. x 6 in. 20-Gauge Galvanized Mending Plate
Standard Shipping
$1.29Features:
- A versatile and easy-to-use mending plate for wood-to-wood connections
- These non-structural connectors are ideal for general fix-up work
- Installs without nails; align wood with arrows at joint and hammer plate to embed prongs
- Used for non-structural applications only (not for truss applications)
- Width: 3 in.
-
Simpson Strong-Tie WA62100MG Wedge-All 5/8 in. x 10 in. Mechanically Galvanized Expansion Anchor
Standard Shipping
$9.51Features:
- One-piece, wrap-around clip ensures uniform holding capacity
- Threaded end is chamfered for ease of starting nut
- Diameter: 5/8 in.
- Length: 10 in.
- Made from mechanically galvanized carbon steel
-
Simpson Strong-Tie HETA12 HETA 12 in. Galvanized Heavy Embedded Truss Anchor
Standard Shipping
$1.72Features:
- An indented embedment line ensures accurate embedment depth
- Compatible with the Simpson Strong-Tie preassembled TSS snap-in seat
- Load rated for wind and seismic forces
- 8-in. exposed length
- Embed 4 in. into a poured concrete bond beam or grouted block wall
-
Simpson Strong-Tie THDT75600H Titen HD 3/4 in. x 6 in. Heavy-Duty Screw Anchor
Standard Shipping
$5.54Features:
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
Simpson Strong-Tie ST22 ST 21-5/8 in. 16-Gauge Galvanized Strap Tie
Standard Shipping
$2.83Features:
- Helps resist tension forces
- Staggered nail pattern reduces the potential for splitting
- Width: 1-1/4 in.
- Length: 21-5/8 in.
- Made from 16-gauge steel
-
Simpson Strong-Tie SDWC15600B-KT Strong-Drive SDWC TRUSS Screw .152 in. x 6 in. T30 Clear-Zinc Coat Orange 500-Qty
Free Shipping
$266.58Features:
- Cap-style head countersinks fully into the double top plate to avoid interference with drywall or finish trades
- Wide tolerance on installation angle makes it easy to install the SDWC correctly
- Can be installed from inside the structure, eliminating exterior work on the upper stories and enhancing job safety
- Fastening can be performed before or after exterior sheathing is applied for added flexibility
- Type-17 point for faster starts and easier driving
-
Simpson Strong-Tie HTS16 HTS 16 in. 14-Gauge Galvanized Heavy Twist Strap
Standard Shipping
$2.59Features:
- Available with the bend reversed; specify –REV- after the model number, such as HTS16-REV
- Versatile with many lengths offered to fit the specific application
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Length: 16 in.
- Made from 14-gauge steel
-
Simpson Strong-Tie BA3.56/14 BA Top-Flange Joist Hanger for 3-1/2 in. x 14 in. Engineered Wood
Standard Shipping
$28.25Features:
- Cost-effective one-piece design compared to welded hangers
- A full-height joist flange that captures the top chord of the joist to prevent rotation and eliminate the need for web stiffeners
- Available for special order to accommodate sloped and/or skewed members
- Actual joist size: 3-1/2 in. x 14 in.
- Made from 14-gauge steel
-
Simpson Strong-Tie HTS20 HTS 20 in. 14-Gauge Galvanized Heavy Twist Strap
Standard Shipping
$3.02Features:
- Available with the bend reversed; specify –REV- after the model number, such as HTS20-REV
- Versatile with many lengths offered to fit the specific application
- Straps do not need to be wrapped over the truss to achieve the allowable load
- Length: 20 in.
- Made from 14-gauge steel
-
Simpson Strong-Tie PSCL 15/32 PSCL 15/32 in. 20-Gauge Galvanized Panel Sheathing Clip
Standard Shipping
$0.24Features:
- Quick installation, no nails required
- Keeps panels even for a level structural plane
- Provides the 1/8-in. space between plywood panels as recommended by the American Plywood Association
- Use the same size sheathing clip as the panel thickness
- Made from 20-gauge steel
-
Simpson Strong-Tie STB2-758124SS Strong-Bolt 2 3/4 in. x 8-1/2 in. Type 304 Stainless-Steel Wedge Anchor
Standard Shipping
$20.15Features:
- Chamfered top designed to prevent mushrooming during installation
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
- Tested per ACI355.2 and AC193
-
Simpson Strong-Tie DTT2Z DTT ZMAX Galvanized Deck Tension Tie for 2x with 1-1/2 in. SDS Screws
Standard Shipping
$14.15Features:
- Suitable for lighter duty holdown applications on single or double 2x posts
- Ties the guardrail post into deck framing
- Stronger and safer than nails, lag screws or bolts
- Ties the deck into the house for a stronger, safer ledger connection
- Helps prevent a common type of deck failure
-
Simpson Strong-Tie N10D5HDG-R Strong-Drive SCN SMOOTH-SHANK CONNECTOR Nail 1-1/2 in. x 0.148 in. HDG 600-Qty
Standard Shipping
$25.46Features:
- Simpson Strong-Tie Connector nails are the best choice for Simpson Strong-Tie connectors
- Head ID stamp for easy identification
- Smooth shank
- Smooth head
- Length: 1-1/2 in.
-
Simpson Strong-Tie DTT1Z-KT DTT ZMAX Galvanized Deck Tension Tie Kit for 2x with Screws 4-Qty
Standard Shipping
$52.37Features:
- Eliminates the need to access the floor joists inside the house
- Ties the guardrail post into deck framing
- Stronger and safer than nails, lag screws or bolts
- Ties the deck into the house for a stronger, safer ledger connection
- Helps prevent a common type of deck failure
-
Simpson Strong-Tie LB210AZ LBAZ ZMAX Galvanized Light-Bent Top-Flange Joist Hanger for 2×10
Standard Shipping
$8.29Features:
- Designed to help resist download forces
- The unique two-level embossment provides added stiffness to the top flange
- Quick installation
- Seat width: 1-9/16 in.
- Height: 9-3/16 in.
-
Simpson Strong-Tie STB2-62600 Strong-Bolt 2 5/8 in. x 6 in. Wedge Anchor
Standard Shipping
$2.53Features:
- Chamfered top designed to prevent mushrooming during installation
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
- Tested per ACI355.2 and AC193
-
Simpson Strong-Tie H8 H8 18-Gauge Galvanized Hurricane Tie
Standard Shipping
$0.87Features:
- Great for connecting 2x deck joists on top of a perpendicular beam
- Install in pairs on either side of the rafter/truss/joist to provide resistance to uplift and lateral forces
- Use also for a variety of connections where one member crosses another
- Made from 18-gauge steel
- Galvanized (G90) for extra corrosion resistance
-
Simpson Strong-Tie DIABST50 Setting Tool for 1/2-in. Rod DIAB Drop-In Anchor
Standard Shipping
$7.05Features:
- Setting tool for DIAB anchors
- For use with Simpson Strong-Tie Drop-In models DIAB50, DIABL50, and DIAB50C
- Sets drop-ins for overhead applications
- Drop-in anchors are sold separately
- Made from carbon steel
-
Simpson Strong-Tie THD75400H Titen HD 3/4 in. x 4 in. Heavy-Duty Screw Anchor
Standard Shipping
$6.07Features:
- Qualified for static and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- No special drill bit required; designed to install using standard-sized ANSI tolerance drill bits
- Testing shows the Titen HD installs in concrete with 50% less torque than competitor anchors
- Hex-washer head requires no separate washer and provides a clean installed appearance
-
Simpson Strong-Tie MSTAM24 MSTAM 24 in. 18-Gauge Galvanized Medium Strap Tie for Masonry
Standard Shipping
$2.53Features:
- Straps are load rated with the correct thickness and number of fasteners, in contrast with field-fabricated straps
- Loads have been increased for wind and seismic forces
- Floor-to-floor clear span application
- Length: 24 in.
- Width: 1-1/4 in.
-
Simpson Strong-Tie MASAZ MASA 16-Gauge ZMAX Galvanized Mudsill Anchor
Standard Shipping
$2.20Features:
- Attaches easily to the concrete form for quick installation
- Lays flat on the form board so there is no anchor bolt to finish around
- No labor costs involved in drilling plates and aligning holes
- Flat design eliminates chances of modification in prefabricated walls
- Eliminates the need to notch studs due the anchor bolts being placed where it will interfere
-
Simpson Strong-Tie PSCL 7/16 PSCL 7/16 in. 20-Gauge Galvanized Panel Sheathing Clip
Standard Shipping
$27.75Features:
- Quick installation, no nails required
- Keeps panels even for a level structural plane
- Provides the 1/8-in. space between plywood panels as recommended by the American Plywood Association
- Use the same size sheathing clip as the panel thickness
- Made from 20-gauge steel
-
Simpson Strong-Tie SUR26Z SUR ZMAX Galvanized Joist Hanger for 2×6 Skewed Right
Standard Shipping
$13.41Features:
- SUR = skewed right
- Features obround nail holes on the acute side, allowing nails to be easily installed parallel to the joist
- These hangers cannot be modified but will accommodate a 40 degree to 50 degree skewed joist
- Available with the acute flange turned in to accommodate end-of-wall installation for solid sawn sizes only (SURC or SULC)
- Nominal joist size: 2×6 or 2×8
-
Simpson Strong-Tie LUS28-2Z LUS ZMAX Galvanized Face-Mount Joist Hanger for Double 2×8
Standard Shipping
$4.05Features:
- Patented double-shear nailing design provides greater strength with fewer nails
- Speed prongs for fast and easy installation
- Angled joist nailing easier in tight spaces
- Do not bend or remove tabs
- Nominal joist size: Double 2×8 and Double 2×10
-
[50 Rolls] TW898 S Max 21ga Stainless Steel Tie Wire for MAX RB398 series
Special Order Shipping
$879.40TW898 S Max 21ga Stainless Steel Tie Wire for MAX RB398 series
-
Tilt Up Lift Inserts
- Fewer Inserts required
- Up to 70% less crane time
- Lower installation and erection cost
-
Tilt Up Profiles
- Saw Cut Cover
- Single Chamfer
- Double-Chamfer
-
Tilt Up Pipe Braces
- Adjustable Pipe Braces have a telescoping pipe for rough dimension and a 6” threaded.
- Fixed Pipe Braces are a standard length with an 18” threaded connecting shoe for final adjustment and anchoring.
- The Heavy-Duty Fixed Pipe Brace is a larger diameter pipe that provides greater capacity with an 18” threaded connecting shoe.
-
Tilt Up Slant Anchor
Slant Anchor Installation Guidelines:
- Position and secure the Slant Anchor before casting panel.
- Erect panel, brace and install bearing grout as required.
- Locate and remove foam Void Former from connection face.
- Drill 1” diameter hole into the foundation using the sleeve as a guide.
- Remove dust from hole using compressed air, vacuum and/or bottle brush.
- Mix Flowable Grout and pour into the connection cavity until half full.
- Place Ductile Bar into sleeve and foundation immediately after grouting.
- Add additional grout to cover the bar and fill the cavity.
- Allow grout to cure before patching/finishing the panel face.
-
Tilt Up Ring Clutch
Connecting:
- User must conduct a visual inspection to detect any possible damage or defects in the Lifter before use.
- The ring-shape of the Lifter hooks onto the loop of the insert for lifting.
- Move the handle to “open” the Lifter ring, position the Lifter over the insert and move the handle to “close”the ring.
-
Tilt Up Helical Ground Anchor (HGA) Bracket
- 1-Bolt
- 2-Bolt
- 3-Bolt
-
Tilt Up Helical Ground Anchor
Helical Ground Anchors are both economical and effective:
- Eliminates forming and handling a concrete deadman at each brace location.
- Eliminates drilling, bolting and patching the floor slab at each brace location.
- Torque installation method produces a verifiable load rating in all soil conditions.
- Provides a quick installation and removal method for anchor placement.
- Compatible with Helical Anchor Extensions, HGA Brackets and Pipe Braces.
-
Tilt Up Brace Inserts
- Wire legs welded to a coil insert
- Disposable plastic plug
-
#5 PINKBAR Fiberglas Rebar 20ft lengths
Quote Request - Shipping Calculated Later
$0.00Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
Select Options This product has multiple variants. The options may be chosen on the product page -
#4 PINKBAR Fiberglas Rebar 20ft lengths
Quote Request - Shipping Calculated Later
$0.00Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
Select Options This product has multiple variants. The options may be chosen on the product page -
#3 PINKBAR Fiberglas Rebar 20ft lengths
Quote Request - Shipping Calculated Later
$0.00Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
Select Options This product has multiple variants. The options may be chosen on the product page -
#2 PINKBAR Fiberglas Rebar 20ft lengths
Quote Request - Shipping Calculated Later
$0.00Features:
- Less Weight. Less Install Time. Fewer Truckloads.
- Less Overall Cost
- 2x stronger in tensile strength compared to the same size diameter of grade 60 steel
- More Durability
- Up to 7x LIGHTER than steel
Select Options This product has multiple variants. The options may be chosen on the product page -
[50 Rolls] MAX TW898-USA 21 Gauge Rebar Tie Wire made from Buy America Steel
Free Shipping
$357.11Features
- Wire steel is melted, annealed and drawn in the U.S.A
- Steel mill certification available
- For use with MAX RB397, RB398, RB517 and RB518
-
[50 Rolls] MAX TW898-EG Electro Galvanized 21 Gauge Rebar Tie Wire
Special Order Shipping
$349.61Features
- 21 Gauge Electro Galvanized Steel Tie Wire
- Excellent resistance to corrosion and rust
- For use with MAX RB397, RB398, RB517 and RB518
