Showing 41–80 of 214 results
-
Standard Shipping
$2.69
Features
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
-
Standard Shipping
$24.49
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$101.59
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$35.29
Features
- Complements the Outdoor Accents APVB decorative post base
- Designed for use with 4x, 6x, 8x and 10x nominal lumber
- Decorative side plates are sold in boxes of 2
-
Standard Shipping
$95.59
Features
- Gable plates are easily installed with Outdoor Accents structural screws and hex-head washers (fasteners sold separately)
-
Standard Shipping
$48.19
APHH heavy hangers connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents® structural wood screw and hex-head washer, and to the header with the Strong-Drive® SDS…
-
Standard Shipping
$20.79
Features:
- The nailing pattern allows for nailing to the edges of double 2x’s
- Strap nail slots are countersunk to provide a lower nail head profile
- The slots below the embedment line enable increased front-to-back concrete bond and help to reduce spalling
- Standard strap length: 24-5/8 in.
- Made from 12-gauge steel
-
Standard Shipping
$26.19
Features
- Use with Outdoor Accents decorative hardware and STN22 hex-head washer for an appealing look
- Use Outdoor Accents structural screw without the washer as a wood-to-wood fastener
- Deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
- Patented SawTooth® point (3 1/2″ and 5 1/2″ screws only) ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications; Type-17 point on 2″ screw ensures fast starts
- Black double-barrier coating offers premium look while providing a medium level of corrosion protection for many outdoor applications
-
Standard Shipping
$124.29
Features
- Certified welds for confidence in strength and loading
- Uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements to ensure optimal performance
- Diamond holes to provide temporary fastening
-
Standard Shipping
$3.39
APLH light hangers connect 2x joists to beams. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily with the Outdoor Accents connector screw.
-
Standard Shipping
$18.89
Features
- Use with Outdoor Accents decorative hardware and STN22 hex-head washer for an appealing look
- Use Outdoor Accents structural screw without the washer as a wood-to-wood fastener
- Deep 6-lobe T40 recess provides easy, secure driving (T40 drive bit included in multi-count packages)
- Patented SawTooth® point (3 1/2″ and 5 1/2″ screws only) ensures fast starts, reduces installation torque and eliminates the need for predrilling in most applications; Type-17 point on 2″ screw ensures fast starts
- Black double-barrier coating offers premium look while providing a medium level of corrosion
-
Standard Shipping
$101.59
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$1.66
Features:
- Embossment feature provides strength at the bend
- Features optional diamond holes of various uplift capacities with min./max. nailing configurations
- Can be installed before or after placement of wall
- Width: 1-1/2 in.
- Length: 7-7/8 in.
-
Standard Shipping
$124.34
Features
- Certified welds for confidence in strength and loading
- Uplift loads increased for earthquake or wind loading
- Bolt spacing that meets NDS code requirements to ensure optimal performance
- Diamond holes to provide temporary fastening
-
Standard Shipping
$64.55
Features:
- Uses Strong-Drive screws, which allow for fast installation, reduced reveal and high capacity
- Provides a 1-in. standoff between post and concrete that meets code requirements
- Embeds in wet concrete at time of pour
- The standoff base reduces the potential for decay at post and column ends
- Shipped with base plate assembled
-
Standard Shipping
$95.59
Outdoor Accents gable plates add decorative appeal and strength to any outdoor living space. They provide reinforcement for a connection from a wood beam to three angled wood braces. Three sizes are available: 6:12 pitch, 8:12 pitch and 12:12 pitch. Gable plates are easily installed with Outdoor Accents structural screws and hex-head washers.
-
Standard Shipping
$18.49
Simpson Strong-Tie APB44DSP Decorative Post Base Side Plate Outdoor Accents decorative side plates attach to the bottom of a post or column to provide a finished look to an installed post base. They are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These decorative side plates provide a black powder…
-
Standard Shipping
$95.59
Features
- Gable plates are easily installed with Outdoor Accents structural screws and hex-head washers (fasteners sold separately)
-
Standard Shipping
$0.79
Features
- Preinstallation of brackets allows rails to slide into place easily
- Eliminates need for toe nails or screws
-
Standard Shipping
$48.89
Features
- Gable plates are easily installed with Outdoor Accents structural screws and hex-head washers (fasteners sold separately)
-
Standard Shipping
$6.69
Features
- Use with Outdoor Accents decorative hardware (sold separately) for an appealing look
- 1/4″ hex head engages with driver bit for easier installation (1/4″ hex drive bit included)
- Optimized heat treating for ductility and strength
- The single-fastener steel-side-plate allowable load of the SD10 exceeds the shear load of a 0.162″ x 3 1/2″ nail
- Black double-barrier coating provides premium look while providing a medium level of corrosion protection for many outdoor applications
-
Standard Shipping
$15.19
Features
- Combined with the Outdoor Accents structural wood screw (SDWSDBB), it provides a structural load-rated solution
- Easy to install
- Code listed in IAPMO-UES ER-192
-
Special Order Shipping
$977.35
Features
- Drives into concrete and steel substrates for application versatility
- Adjustable power settings for application versatility
- Automatic piston return and load advancement for fast application speed
- Tool-free disassembly for easy, onsite cleaning and serviceability
-
-
Standard Shipping
$7.69
Features:
- Features double-shear nailing which distributes the load through two points on each joist nail for greater strength
- Allows for the use of fewer nails, faster installation, and the use of standard nails for all connections
- Do not bend or remove tabs
- Nominal joist size: 4×8
- Made from 14-gauge steel
-
Standard Shipping
$29.10
Features:
- Extra optional triangle holes for additional load
- HUC-series hangers are tested, load rated and code compliant
- Install wood joists to wood, masonry and concrete
- Seat width: 3-1/8 in.
- Nominal joist Size: Double 2×10
-
Standard Shipping
$84.56
Features:
- Type-17 point enables easy driving with no predrilling and minimal wood splitting
- 3/8-in. hex head with 0.48-in. integrated washer
- Head is stamped with the Simpson Strong-Tie — sign and fastener length for easy identification after installation
- Serrated threads
- Replacement driver bit model BITHEXR38-134 (not included)
-
Standard Shipping
$28.49
Features
- Chamfered top designed to prevent mushrooming during installation
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3 1/4″, and lightweight concrete-over-steel deck thickness of 2 1/2″ and 3 1/4″
- Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
-
Standard Shipping
$62.80
Features
- Pins for Concrete and Concrete Masonry (CMU)
- Gas Fasteners
- Code compliant with the 2018 IBC/IRC, 2015 IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC
- Tested in accordance with ASTM E1190 and ICC-ES AC70 for use in concrete, CMU block and steel
-
Standard Shipping
$15.49
[Pack of 100] DeWalt 50100-PWR .300 Head Drive Pin 3 In W-7/8 In Washer Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
Standard Shipping
$13.39
[Pack of 100] DeWalt 50098-PWR 300 Head Drive Pin 2 1/2 W-7/8 Washer Drive pins with a .300″ head by Powers Fasteners have a specially designed point that allows it to properly penetrate into typical base materials for the purpose of permanently fastening a fixture to concrete, concrete block and structural steel. A plastic flute…
-
Standard Shipping
$13.79
[Pack of 100] DeWalt .300 Head Drive Pin 2In w-7/8In Washer 50096-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
Standard Shipping
$6.79
[Pack of 100] DeWalt .300 Head Drive Pin 1 1/2 In 50034-PWR drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in various lengths….
-
Standard Shipping
$12.75
Features
- Drive pins with a 0.300″ diameter head
- Plastic flute is mounted on the pin shank
- Fastening a fixture to concrete, concrete over steel deck, concrete masonry walls
- The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.
-
Standard Shipping
$11.50
h3>[Pack of 100] DeWalt 50026-PWR .300 Head Drive Pin 1In. Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to increase performance in…
-
Standard Shipping
$12.50
[Pack of 100] DeWalt 50022-PWR Powers Fasteners 3/4″ Standard Drive Pins .300 Head Drive pins with a .300 diameter head are designed for permanently fastening a fixture to concrete, some types of masonry and A36 structural steel. Drive pins are manufactured with a 0.143″ diameter shank in various lengths. Knurled shank designs are available to…
-
Standard Shipping
$12.50
[Pack of 100] DeWalt 50012-PWR Powers Fasteners 50012-PWR 1/2″ Standard Drive Pins .300 Head Drive pins with a 0.300″ diameter head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572 / A992 structural steel. The fasteners are manufactured with a 0.145″ diameter shank in…
-
Standard Shipping
$45.58
Features
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
Standard Shipping
$12.17
Features
- High quality powder loads, designed for consistently and reliability
- Specific load types are designed for each caliber powder actuated tool
- They are offered as single cartridge units for single shot tools and also collated in groups of 10 into plastic strips for semi-automatic tools
- Manufactured by DEWALT
-
Standard Shipping
$12.99
Features
- General purpose anchoring
- 02820-PWR installs in a variety of base materials
- Roof Flashing
- Mechanical Attachments