-
![AT-XP Acrylic AT-XP10 10oz](https://www.heydensupply.com/wp-content/uploads/2021/10/AT-XP-Acrylic-AT-XP10-10oz-1000px-600x600.jpg)
![CDT10S Manual Dispensing Tool with AT-XP10 High-Strength Acrylic Adhesive 9.4 oz. coaxial cartridge](https://www.heydensupply.com/wp-content/uploads/2021/10/A_AT-XP10-CDT10S_ProdPho_Pho_Prod_AT-XP-Acrylic-10-CDT10S-Dispenser_C0-600x600.jpg)
Standard Shipping
$29.10
This item has been DISCONTINUED.
-
![XP30](https://www.heydensupply.com/wp-content/uploads/2022/11/A_AT-XP30_ProdPho_Pho_Prod_AT-XP-Acrylic-30oz_C0-600x600.jpg)
Standard Shipping
$38.59
This item has been DISCONTINUED.
-
![AT3G10](https://www.heydensupply.com/wp-content/uploads/2023/11/05bd20b837c7cf5859ed688e125287e9880c47ff-600x600.jpg)
Oversized Shipping
$11,108.49
Features
- AT3G10 is excellent for use in cold weather conditions or applications where fast cure is required
- Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
- Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
- Base material installation temperatures down to 0°F (-18°C)
- Use in grout-filled CMU construction
-
![ET3G22-N](https://www.heydensupply.com/wp-content/uploads/2023/11/557dbb03804da84b1867f6b0844e35027f801099-600x600.jpg)
Standard Shipping
$97.39
Features
- ET3G56 is suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
- Ideal for general doweling and threaded rod applications
- Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
-
![AT-XP13](https://www.heydensupply.com/wp-content/uploads/2022/11/A_AT-XP13_ProdPho_Pho_Prod_AT-XP-Acrylic-13oz_C0-600x600.jpg)
Standard Shipping
$40.37
Features
- Excellent for use in cold weather conditions or applications where fast cure is required.
- superior sustained load performance at elevated temperature.
- can be specified for dry and damp conditions when in-service temperatures range from -40°F (-40°C) to 180°F (82°C).
- Approved for installation with vacuum-drill bit system without further hole cleaning.
- Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to reduced and elevated temperatures and long-term sustained loads.
- Easy hole-cleaning procedure — no power-brushing required.