Showing 81–120 of 424 results
-
Standard Shipping
$46.29
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$0.79
Features
- Preinstallation of brackets allows rails to slide into place easily
- Eliminates need for toe nails or screws
-
Standard Shipping
$6.69
Features
- Use with Outdoor Accents decorative hardware (sold separately) for an appealing look
- 1/4″ hex head engages with driver bit for easier installation (1/4″ hex drive bit included)
- Optimized heat treating for ductility and strength
- The single-fastener steel-side-plate allowable load of the SD10 exceeds the shear load of a 0.162″ x 3 1/2″ nail
- Black double-barrier coating provides premium look while providing a medium level of corrosion protection for many outdoor applications
-
Standard Shipping
$61.84
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Standard fractional sizes, hole size same as anchor size
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Removable — ideal for temporary anchoring or applications where fixtures may need to be moved
- 6-lobe drive reduces driver-bit cam-outs, resulting in easier installation
- Countersunk head allows screw anchor applications incompatible with a hex head
- Available in 1/4″ and 3/8″ diameters
-
Standard Shipping
$95.38
Features
- Tested in accordance with ACI 355.2, AC193 and AC106
- Qualified for static, wind and seismic loading conditions
- Thread design undercuts to efficiently transfer the load to the base material
- Standard fractional sizes
- Specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
- No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
- Hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
- Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
- Reuse of the anchor will not achieve listed loads and is not recommended
-
Standard Shipping
$7.69
Features:
- Features double-shear nailing which distributes the load through two points on each joist nail for greater strength
- Allows for the use of fewer nails, faster installation, and the use of standard nails for all connections
- Do not bend or remove tabs
- Nominal joist size: 4×8
- Made from 14-gauge steel
-
Standard Shipping
$29.10
Features:
- Extra optional triangle holes for additional load
- HUC-series hangers are tested, load rated and code compliant
- Install wood joists to wood, masonry and concrete
- Seat width: 3-1/8 in.
- Nominal joist Size: Double 2×10
-
Standard Shipping
$84.56
Features:
- Type-17 point enables easy driving with no predrilling and minimal wood splitting
- 3/8-in. hex head with 0.48-in. integrated washer
- Head is stamped with the Simpson Strong-Tie — sign and fastener length for easy identification after installation
- Serrated threads
- Replacement driver bit model BITHEXR38-134 (not included)
-
Standard Shipping
$388.99
Features
- Weld‑on ring with 180° swivel
- Six‑screw hole pattern in plate allows for symmetric 2‑, 4‑ and 6‑screw options
- Tested for applications on floor/roof panels, wall panels, beams and columns
- OSHA Section 1926.753(e)(2) compliant
-
New Product
Free Shipping
$388.99
Features
- APVPK44-D1 features all the hardware for building up to a 10′ x 10′ pergola is in one box
- Outdoor Accents connectors and fasteners are easy to install and make it possible for DIYers and homeowners to build a strong pergola
- Free plans and cuts sheets are available for building an 8′ x 8′ or 10′ x 10′ pergola
- Made from 14-gauge steel (APVA4); 12-gauge (APVL4); 16-gauge base, 12-gauge strap (APVB44)
- ZMAX galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
-
$53.99
Features
- Easily connects to the components in an auto-feed system
- Minimizes user fatigue while maximizing productivity
-
Free Shipping
$829.99
Features
- Precise, self-locking depth adjustment for consistent fastener drive depth
- Reversible and replaceable non‑skid teeth
- Lightweight G3 extension for better ergonomics
- Powerful DeWalt cordless driver motor
- The patented curved collation strips hold the screws up and away from the work surface; the collated strips are also pointed on the inserted end to simplify loading
-
Standard Shipping
$177.99
Features
- Available alone or as part of the PRO300SG2, PROSDD and PROCCS+ systems
- Expanded depth settings for high-density flooring materials
- Non-skid teeth are reversible and replaceable
- Uniform toenailing and countersink on slick surfaces
- Sure-grip guide tube increases stability for a broad range of screws
-
Free Shipping
$695.99
Features
- Reversible and replaceable non-skid teeth.
- Lightweight G3 extension for better ergonomics.
- Powerful DeWalt cordless driver motor.
- Precise, self-locking depth adjustment for consistent fastener drive depth.
- The decking noseclip positions the screw on the deck board in alignment with the joist for easy installation from a standing position.
-
Free Shipping
$686.99
Features
- Precise, self-locking depth adjustment for consistent fastener drive depth
- Lightweight G3 extension for better ergonomics
- Powerful DeWalt cordless driver motor
- The patented curved collation strips hold the screws up and away from the work surface, making moving and positioning the tool easier
- The collated strips are also pointed on the inserted end to simplify loading
-
Free Shipping
$676.99
Features
- Precise, self-locking depth adjustment for consistent fastener drive depth.
- Lightweight G3 extension for better ergonomics.
- Powerful DeWalt cordless driver motor.
- The patented curved collation strips hold the screws up and away from the work surface, making moving and positioning the tool easier. The collated strips are also pointed on the inserted end to simplify loading.
-
Standard Shipping
$28.49
Features
- Chamfered top designed to prevent mushrooming during installation
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3 1/4″, and lightweight concrete-over-steel deck thickness of 2 1/2″ and 3 1/4″
- Standard (ANSI) fractional sizes: fits standard fixtures and installs with common drill bit and tool sizes
-
Oversized Shipping
$4,364.89
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Standard Shipping
$235.69
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- No tools required
- Made in the USA with global materials
-
Standard Shipping
$124.69
Features
- Adjustable hub size
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Standard Shipping
$90.69
Features
- Adjustable hub size
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Oversized Shipping
$1,945.59
Features
- Adjustable hub size
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Oversized - Special Order
$7,518.79
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- No tools required
- Made in the USA with global materials
-
Oversized Shipping
$4,364.89
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Oversized Shipping
$2,388.49
Features
- One-piece design
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- No tools required
-
Standard Shipping
$249.89
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- No tools required
- Made in the USA with global materials
-
Oversized Shipping
$1,467.29
Features
- Adjustable hub size
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Oversized Shipping
$4,656.99
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Standard Shipping
$292.29
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- No tools required
- Made in the USA with global materials
-
Standard Shipping
$185.19
Features
- One-piece design
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- No tools required
-
Standard Shipping
$162.89
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Standard Shipping
$106.89
Features
- Adjustable hub size
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Standard Shipping
$110.29
Features
- One-piece design
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- No tools required
-
Standard Shipping
$115.89
Features
- One-piece design
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- No tools required
-
Oversized Shipping
$2,485.59
Features
- One-piece design
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- No tools required
-
Standard Shipping
$271.59
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Standard Shipping
$242.39
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Standard Shipping
$149.29
Features
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Oversized Shipping
$1,100.49
Features
- Adjustable hub size
- Quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials
-
Oversized Shipping
$4,074.89
Features
- 4-1.5IN-UBC is made for a quick and easy installation
- Made of durable noncorrosive plastic
- Snaps over the rebar
- Made in the USA with global materials