Tilt Up Lift Inserts
- Fewer Inserts required
- Up to 70% less crane time
- Lower installation and erection cost
Showing all 8 resultsSorted by popularity
-
-
Tilt Up Profiles
- Saw Cut Cover
- Single Chamfer
- Double-Chamfer
-
Tilt Up Pipe Braces
- Adjustable Pipe Braces have a telescoping pipe for rough dimension and a 6” threaded.
- Fixed Pipe Braces are a standard length with an 18” threaded connecting shoe for final adjustment and anchoring.
- The Heavy-Duty Fixed Pipe Brace is a larger diameter pipe that provides greater capacity with an 18” threaded connecting shoe.
-
Tilt Up Slant Anchor
Slant Anchor Installation Guidelines:
- Position and secure the Slant Anchor before casting panel.
- Erect panel, brace and install bearing grout as required.
- Locate and remove foam Void Former from connection face.
- Drill 1” diameter hole into the foundation using the sleeve as a guide.
- Remove dust from hole using compressed air, vacuum and/or bottle brush.
- Mix Flowable Grout and pour into the connection cavity until half full.
- Place Ductile Bar into sleeve and foundation immediately after grouting.
- Add additional grout to cover the bar and fill the cavity.
- Allow grout to cure before patching/finishing the panel face.
-
Tilt Up Ring Clutch
Connecting:
- User must conduct a visual inspection to detect any possible damage or defects in the Lifter before use.
- The ring-shape of the Lifter hooks onto the loop of the insert for lifting.
- Move the handle to “open” the Lifter ring, position the Lifter over the insert and move the handle to “close”the ring.
-
Tilt Up Helical Ground Anchor (HGA) Bracket
- 1-Bolt
- 2-Bolt
- 3-Bolt
-
Tilt Up Helical Ground Anchor
Helical Ground Anchors are both economical and effective:
- Eliminates forming and handling a concrete deadman at each brace location.
- Eliminates drilling, bolting and patching the floor slab at each brace location.
- Torque installation method produces a verifiable load rating in all soil conditions.
- Provides a quick installation and removal method for anchor placement.
- Compatible with Helical Anchor Extensions, HGA Brackets and Pipe Braces.
-
Tilt Up Brace Inserts
- Wire legs welded to a coil insert
- Disposable plastic plug
