Showing 121–160 of 325 resultsSorted by popularity
-
Free Shipping
$727.99Features
- Dewalt DCG460X2 3,000 MWO Brushless Motor – Brushless Motor Motor Producing 3,000 MWO Delivers Incredible Power for Extreme Applications
- Kickback Brake – Kickback Brake engages when a pinch, stall, or bind-up event is sensed
- E-Clutch – E-Clutch proactively stalls motor when tool is under too much load
- WTC – Wireless Tool Control enables connectivity to WTC enabled Vacuums
- Chip-Ready – Tool Connect Integrated Chip Pocket
-
Free Shipping
$350.99Features
- Dewalt DCF500GG1 brushless motor delivers 50 ft-lbs of max torque and a no-load speed of 0-450 RPM
- Interchangeable anvil design provides the ability to quickly swap between 3/8″ square drive, and 1/4″ square drive, and 1/4″ quick change hex
- Oil resistant glass filled nylon tool housing resists effects of harsh automotive oils and solvents
-
Free Shipping
$423.99Features
- DEWALT DCF510GE1 brushless motor delivers 75 ft-lbs of max torque and a no-load speed of 0-300 RPM
- Interchangeable anvil design provides the ability to quickly swap between 3/8″ and 1/2″ square drives
- Oil-resistant glass-filled nylon tool housing resists effects of harsh automotive oils and solvents
-
Free Shipping
$898.99Features
- The Makita GT401M1D1 combo kit Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM) provides 1,950 in.lbs. of Max Torque
- Recipro Saw delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute and a 1-1/4″ stroke length for faster cutting
- High-luminance 4 L.E.D. flashlight provides 160 lumens
- The Makita GT401M1D1XPT is engineered to provide increased dust and water resistance in harsh job site conditions
-
Free Shipping
$484.99Features
- Makita XLC10R1W brushless motor runs cooler and more efficiently; delivers up to 42 CFM
- Push button 4-speed power selection (max/high/normal/quiet) for efficient operation
- Up to 27 minutes of continuous use in quiet mode from a single fully charged 18V Compact 2.0Ah LXT® battery; optional 5.0Ah battery delivers up to 69 minutes of continuous use
- Accepts disposable paper or reusable cloth dust bags for added convenience
- Compact and ergonomic design for operator comfort
-
Free Shipping
$1,698.99Features
- TheDewalt DCH911Z2 brushless motor delivers 27 Joules of Impact Energy for fast chipping of concrete
- Rear handle design allows for Comfortable Operation In horizontal and downward chipping
- Wireless tool control technology enables the user to link the tool to the DCV585 60-Volt MAX dust extractor (sold separately) for remote extractor activation
- This cordless chipping hammer comes Tag Ready so individuals and companies can attach a DEWALT Tag (sold separately) to track its location via the DEWALT Tool Connect app
- The integrated SHOCKS Active Vibration Control system is designed to minimize vibration felt at the handles compared to chipping hammers without this feature
-
Free Shipping
$545.99Features
- Makita GSH05M1 is up to 40% faster cutting speed
- Magnesium base for durability and less weight
- Up to 290 cuts per charge in 2X10 SPF lumber using one 4.0Ah battery
- Makita-built brushless motor delivers 5,200 RPM for faster cutting performance
- Large 2-1/4″ cutting capacity at 90° and 1-5/8″ at 45°
-
Free Shipping
$1,071.99Features
- 2 mode power output levels: 350 watt and 500 watt
- Auto-switching 2 bay battery system for 2X more run time
- Ideal for transportation with built in carrying handle and space saving design at 1.5 cubic feet
- Durable water resistant design, dust resistant inlet port, and tempered glass door
- 2.1 gallon interior capacity ensures ample room for heating
MW001GZ Instruction manual
-
Oversized - Special Order
$7,141.99Features
- The Makita XUC06Z Delivers up to 100 minutes of run time (distance equivalent to 4.5 miles) under load using four 18V LXT® 6.0Ah BL1860 battery (battery not included)
- Holds (4) 18V LXT® Lithium-Ion batteries but operates using (2) 18V batteries at a time; utilizes additional batteries when needed (batteries not included)
- 3 forward speeds and one reverse with variable speed control by switch trigger in each range
- 295L heaped capacity with maximum load over 660 lbs
- Bucket equipped with a capped nozzle for draining liquid
-
Oversized - Special Order
$7,571.99Features
- Makita XUC04Z Delivers up to 100 minutes of run time (distance equivalent to 4.5 miles) under load using four 18V LXT® 6.0Ah BL1860 battery (battery not included)
- Holds (4) 18V LXT® Lithium-Ion batteries but operates using (2) 18V batteries at a time; utilizes additional batteries when needed (batteries not included)
- 3 forward speeds and one reverse with variable speed control by switch trigger in each range
- 200L heaped capacity with maximum load over 660 lbs
- Hand lever-operated mechanical axle disc brake plus electromagnetic brake (motor)
-
Free Shipping
$410.99Features
- The XT296ST features Makitas-built brushless motor which is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-1,800 RPM)(0-8,250 & 0-27,000 BPM) with brushless motor delivers 970 in.lbs. of Max Torque for up to 70% more power*; weighs only 4.9 lbs. with battery for a wide range of drilling, fastening and hammer drilling applications
- The brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life
- The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Optimization of motor specifications and gear ratios improves efficiency and allows the Hammer Driver-Drill to drill into 2x dimensional lumbers in high speed
-
Free Shipping
$442.99Features
- XPH16T features a variable 2-speed design (0-550 & 0-1,800 RPM) (0-8,250 & 0-27,000 BPM) covers a wide range of drilling, driving and hammer applications
- Makita-built brushless motor delivers 970 in.lbs. of Max Torque for up to 70% more power*
- Efficient brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The brushless motor eliminates carbon brushes, enabling the brushless motor to run cooler and more efficiently for longer life
- The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
-
Special Order Shipping
$1,257.99Features
- Higher Capacity delivers 1,200 Watt Hours of Output with PDC1200A01
- Longer Run Time ideal for all day work; expected run times with PDC1200A01 may vary by product, application, and workday amount
- Ultimate Compatibility can be powered by any Makita portable backpack power supply
- Durable Design IPX4-rated weather-resistant construction
- Backpack Power Supply (PDC1200A01 or PDC01) can be mounted directly onto the mower (power supply units sold separately)
-
Special Order Shipping
$1,427.99Features
- Makita-built brushless motor delivers the power of a 40cc gas brush cutter
- Automatic Torque Drive Technology mode automatically shifts from 3,500-6,400 RPM for extended run time or added power
- Up to 100 minutes of run time with (2) 40V XGT® 4.0Ah batteries
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-
Free Shipping
$900.99Features
- Makita-built brushless motor delivers the power of a 22.7cc gas hedge trimmer
- Up to 13% more torque than gas for cutting thick branches
- Up to 6 hours of run time with 40V XGT® 4.0Ah battery
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-
Special Order Shipping
$1,570.99Features
- Makita GML01PL features a high torque motor,delivers gas performance high vacuum lift for premium cut quality
- Auto-switching 2 bay battery system for 2X more run time
- IPX4 weather-resistant construction for durability and long life
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-
Special Order Shipping
$845.99Features
- No gas, emissions, oil mixing or pull starts with reduced maintenance and low noise levels
- Makita-built brushless motor delivers power of a 64cc gas backpack blower
- Delivers up to 4 hours of runtime with PDC1200A01 ConnectX™ 1,200Wh Portable Backpack Power Supply (power supply sold separately)
- High blowing force of 22 N for heavy debris
- Tube-mounted variable speed trigger adjusts between 0 – 670 CFM for power and run time management
-
Free Shipping
$728.99Features
- Makita-built brushless motor delivers power of a 42cc gas chain saw
- 27% faster chain speed at 5,020 FPM*
- Extreme Protection Technology (XPT™) engineered for improved dust and water resistance
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
-
Free Shipping
$302.99Features
- No gas, emissions, oil mixing or pull starts
- High performance with low noise levels
- Reduced maintenance lowers operating costs and minimizes down time
- Weighs up to 30% less than gas models
- 24″ dual action double-sided steel blade provides optimal performance
-
Special Order Shipping
$1,213.99Features
- Dewalt DCF414GE2 features a BRUSHLESS MOTOR that delivers up to 4,500 lb of pulling force for fastening rivets, including those made of stainless steel
- GET UP TO 300 RIVETS PER CHARGE** to maximize productivity on the jobsite
- DESIGNED FOR EASE OF USE with tool-free nose change and on-board nose piece storage
- COMPATIBLE WITH MUTIPLE SIZE RIVETS including 3/16″, 15/64″, and 1/4″ rivets
- CAPABLE OF PULLING aluminum, steel, and stainless steel blind rivets
-
Free Shipping
$595.99Features
- 1/2″ Driver-Drill with 2-speeds (0-600 & 0-1,900 RPM) delivers up to 480 in.lbs. of Max Torque
- 1/2″ Driver-Drill features a compact design at only 7-1/4″ long and weighs only 3.3 lbs. with battery for reduced operator fatigue
- Variable speed Impact Driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 in.lbs. of Max torque for a wide range of fastening applications
- 6-1/2″ Circular Saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. with battery
- Recipro Saw provides 0-3,000 SPM and features “tool less” blade change; weighs only 3.9 lbs. with battery
-
Free Shipping
$2,467.99Features
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-600 & 0-1,900 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque and weighs only 4.0 lbs. with battery
- 6-1/2″ Circular Saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. with battery
- Reciprocating Saw provides 0-2,800 SPM with “tool-less” blade changes and weighs only 8.3 lbs. with battery
- Variable speed Impact Driver (0-2,900 RPM & 0-3,500 IPM) provides 1,460 in.lbs. of Max Torque and weighs only 2.8 lbs. with battery
- 1/2″ Impact Wrench delivers 170 ft.lbs. of Max Torque and weighs only 3.8 lbs. with battery
XT1501 Overview
-
Free Shipping
$1,157.99Features
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL™ Motor delivers 1,250 in.lbs. of Max Torque; weighs only 6.0 lbs. with battery for a wide range of drilling, fastening and hammer drilling applications
- Impact Driver features 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM) provides 1,550 in.lbs. of Max Torque; weighs only 3.3 lbs. with battery
-
Free Shipping
$800.99Features
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-2,100 RPM) (0-8,250 & 0-31,500 BPM) delivers 1,250 in.lbs. of Max Torque; weighs only 6.0 lbs. with battery
- Impact Driver features 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM) provides 1,550 in.lbs. of Max Torque; weighs only 3.3 lbs. with battery
-
Free Shipping
$1,057.99Features
- Variable 2-speed Hammer Driver-Drill with Makita-built Brushless Motor delivers (0-550 & 0-2,100 RPM) and 1,250 in.lbs. of Max Torque; weights only 6.0 lbs. with battery
- Impact Driver features 4-speed power selection (0-1,100 / 0-2,100 / 0-3,200 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,600 / 0-3,800 IPM) provides 1,600 in.lbs. of Max Torque; weighs only 3.4 lbs. with battery
- 7-1/4″ Circular Saw delivers 5,100 RPM for maximum performance and features a large 2-9/16” cutting capacity at 90°; weighs only 12.4 lbs. with batteries
- Recipro Saw delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute and a 1-1/4″ stroke length for faster cutting; weighs only 8.2 lbs. with battery
- High-luminance 4 L.E.D. flashlight provides 160 lumens
-
Free Shipping
$1,427.99Features
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The BL™ Brushless Motor eliminates carbon brushes, enabling the BL™ Motor to run cooler and more efficiently for longer life
- The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL™ Motor delivers 1,250 in.lbs. of Max Torque; weighs only 6.0 lbs. with battery
- Impact Driver features 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM) provides 1,550 in.lbs. of Max Torque; weighs only 3.3 lbs. with battery
-
Free Shipping
$299.99Features
- Driver-Drill weighs only 2.9 lbs. with battery for reduced operator fatigue
- Compact and ergonomic design at only 5-7/8″ long
- Mechanical variable 2-speed transmission (0-500 & 0-1,700 RPM) for a wide range of drilling and fastening applications
- Makita-built Brushless Motor delivers 350 in.lbs. of Peak Torque
- Engineered with a metal jampot design for increased durability
-
Free Shipping
$437.50Features
- Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- Brushless motor eliminates carbon brushes, enabling the brushless motor to run cooler and more efficiently for longer life
- The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Variable 2-speed 1/2″ Hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL™ Motor delivers 1,250 in.lbs. of Max Torque; weighs only 6.0 lbs. with battery for a wide range of drilling, fastening and hammer drilling applications
- 3-stage L.E.D. gauge indicates battery charge level
-
Free Shipping
$678.99Features
- Impact Driver features 3-speed power selection (0-1,100 / 0-2,100 / 0-3,600 RPM & 0-1,100 / 0-2,600 / 0-3,800 IPM) provides 1,550 in.lbs. of Max Torque; weighs only 3.3 lbs. with battery
- 7-1/4″ Circular Saw delivers 5,100 RPM for maximum performance and features a large 2-9/16” cutting capacity at 90°; weighs only 12.4 lbs. with batteries
- Efficient Makita-built brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The electronically-controlled brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
- Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditions
-
Free Shipping
$550.00This item has been DISCONTINUED.
-
Free Shipping
$328.99Features
- Driver-Drill weighs only 3.1 lbs. with battery for reduced operator fatigue
- Compact and ergonomic design at only 6-1/2″ long
- Mechanical variable 2-speed transmission (0-500 & 0-1,700 RPM) (0-7,500 & 0-25,500 BPM) for a wide range of drilling, fastening and hammer drilling applications
- Makita-built Brushless Motor delivers 350 in.lbs. of Peak Torque
- Engineered with a metal jampot design for increased durability
-
Free Shipping
$680.99Features
- Makita-built brushless motor with variable speed control dial (600 – 2,200 RPM)
- Constant speed control automatically applies additional power under load for optimum performance
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Cordless solution for a variety of polishing applications where mobility is important
- Variable speed dial and trigger (0-2,200 RPM) enables user to match the speed to the application
-
Free Shipping
$698.99Features
- Makita-built motor delivers 810 ft.lbs. of Nut-Busting Torque and 560 ft.lbs. of Fastening Torque
- 3 forward and 3 reverse Auto-Stop modes for increased efficiency
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- 4-speed power selection switch (0-600 / 0-1,200 / 0-1,900 / 0-2,300 RPM & 0-1,200 / 0-1,900 / 0-2,700 / 0-2,900 IPM) for a wide range of applications
- Full speed mode function reduces trigger pull to reach full speed
-
Free Shipping
$614.99Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver powerful grinding and up to 60% faster cutting speed than predecessor models*
- X-LOCK quick change system allows for tool-free wheel changes with an easy snap-on mounting and fast change-outs by simply pulling a release lever
- Electronic current limiter helps protect the motor from overload in high torque application
- Electric brake stops the grinding or cut-off wheel in 2 seconds or less for maximum productivity
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
