Showing 41–80 of 325 resultsSorted by popularity
-
$503.71Features
- Mix up to 19 premixed drywall buckets (5 gal.) on a single charge using the DCB606 DEWALT FLEXVOLT® battery (6Ah)**
- Mix up to 17 buckets of tile mortar (5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- Mix up to 9 buckets of concrete (4.5 gal.) on a single charge using THE DCB606 FLEXVOLT battery (6.0Ah)**
- 3-Position side handle allows for optimum position while mixing
- Integrated E-Clutch System helps to improve user control
-
Free Shipping
$342.99Features
- Brushless motor for efficient performance and runtime
- Wide variable speed range with dedicated High and Low settings helps optimize usage in light- and heavy-gauge substrates
- Four dedicated tool modes enable operation of tool in Trigger Mode (High Speed), Trigger Mode (Low Speed), PushStart Mode, and Lock-On Mode
- Top-mounted electronic mode select enables fast, one-handed switching between the tool’s four modes
- Adjustable nosecone enables consistent setting of proper screw depth
-
Oversized - Special Order
$1,206.25Features
- Up to 100 minutes of run time with two 18V LXT® 5.0Ah batteries (batteries sold separately)
- Powered by (1) 18V LXT® battery with the option to insert (1) additional battery for extended run time (batteries sold separately)
- Makita-built brushless motor for optimal performance
- 290 lbs. maximum load capacity
- Steel bucket provides 3 cu. ft. capacity
-
Free Shipping
$988.99Features
- Makita-built brushless motor along with two 40V max XGT® batteries combine to deliver up to 15% faster breaking efficiency than corded equivalent model*
- Constant speed control automatically applies additional power under load for optimum performance
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
- Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
-
Free Shipping
$210.99Features
- Mechanical 2-speed transmission (0-500 & 0-1,900 RPM) for a wide range of drilling and fastening applications
- Makita-built brushless motor delivers 440 in.lbs. of Max Torque
- Weighs only 3.6 lbs. with battery for reduced operator fatigue
- Built-in dual L.E.D. lights with afterglow illuminate the work area
- 3-year limited warranty on tool, battery and charger
-
Free Shipping
$201.99Features
- Makita XPH14Z features a built BL™ Brushless Motor that delivers 1,250 in.lbs. of Max Torque
- Compact and ergonomic design at only 7″ long; 14% shorter than previous model
- 2-speed transmission (0-550 & 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications
- 0-31,500 BPM for faster hammer drilling in masonry materials
- All metal 1/2″ self ratcheting chuck for improved bit gripping strength and durability
- Weighs only 6.0 lbs. with battery (battery not included) for reduced operator fatigue
- L.E.D. lights illuminate the work area
- Rubberized soft grip provides increased operator comfort
- Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
-
SALE 19% OFF
Free Shipping
$518.17 Original price was: $518.17.$421.01Current price is: $421.01.Features
- Brushless motor delivers up to 565 CFM and 143 MPH
- Up to 35 minutes of run time with 40V XGT? 4.0Ah battery
- Cruise control lever with variable speed trigger adjusts between 0 – 476 CFM
- 3-stage telescoping long nozzle
- Speed lock for convenient and continuous operation
-
Free Shipping
$2,973.66The PJRC160 is a professional grade cordless brushless re-bar cutter with a 360 degree rotatable head.
-
Special Order Shipping
$2,460.93Features:
- 5 times faster than manual tying
- Lightweight and compact body for easy maneuvering and one handed operation
- Li-ion battery can complete 2600 ties per charge
- Ties approximately 120 times per coil.
- Brushless twisting motor
-
Special Order Shipping
$4,076.97FEATURES
- REDUCES BACK STRAIN – The RB401T-E is an ergonomic solution for backbreaking slab work.
- ADJUSTABLE HANDLES – Users can adjust the handles to 2 positions, to find the most comfortable fit for their height.
- TRIGGERLESS TECHNOLOGY – An automatic contact mechanism (Pat. Pending) allows the tool to instantly tie when pushed down over a rebar intersection.
- SHORTER TIE HEIGHT (Pat. Pending) – A Wire Bending Mechanism produces a shorter tie height. Less concrete is needed to fully cover a wire tie.
- ENCLOSED DESIGN – Greater protection against debris and moisure entering the tool.
- QUICKLY & EASILY LOAD TIE WIRE – Rapidly load the dual wire coil with the quick load magazine design.
-
Free Shipping
$2,680.11The RB518 is a battery operated rebar tying tool that can tie #5 x #5 to #7 x #8 rebar. You will save time, save money and increase productivity with this handy cordless tool. MAX Re-Bar-Tiers are also proven to reduce the risk of developing musculoskeletal diseases.
-
Special Order Shipping
$3,136.99Features
- Accuracy of +/- 1/16 in. accuracy at 100 ft.
- DW080LGSK offers 2,000 ft. range
- Tool ConnectIntegration extends laser range by 100 ft.
- Dual axis slope mode for added functionality
- Scan mode of 15/45/90 degrees
-
Special Order Shipping
$2,968.99Features
- Accuracy of 1/16 in. at 100 ft.
- DW080LGS offers 2000 ft. range
- Dual axis slope mode for added functionality
- Scan mode of 15/45/90 degrees
- IP67 rated with a 1 meter drop for jobsite durability
-
Special Order Shipping
$3,084.99Features
- Left or Right Side Positionable Controls
- Help Optimize Performance
- Convenient Onboard Storage
- State-of-Charge Indicator
- Durable Engineering
-
Oversized - Special Order
$5,941.71Features
- DCPS7154AG2 features the brand new speed selector to help optimize performance.
- For user Work in comfort on tough jobs
- Activate and deactivate unit without releasing the handle mounted controls
- Get right to work with the included 3.2 gal. removable water tank, gravity feed sprinkler, and drive belt cover
- Durable Engineering
-
Special Order Shipping
$5,256.99Features
- Take on heavy duty jobs with the DCPS150AG2, featuring a 6-3/8 in. coring capacity.
- Side Handle Water Connection Point
- Wireless Tool Control
- Versatile Handle
-
Special Order Shipping
$2,627.99Features
- DCPS320AG2 features an Advanced Module – Maintain constant VPM until the battery is fully depleted
- Activated remote control for water management and wireless communication to other DEWALT products
- Connect provided strap for seamless transport with integrated carry harness connection points
- Helps withstand tough jobsite conditions with a durable roll cage
- Simply push in the desired shaft and twist the collar to remove
-
Special Order Shipping
$3,427.99Features
- Work comfortably with controls that can be mounted on either side of the harness at various heights
- Take advantage of a lightweight 25 lbs. design with the DEWALT POWERSHIFT Battery (DCBPS0554 battery sold separately)
- DCPS310AG2 is designed To Withstand Jobsite Conditions – Take on tough jobsites with a durable roll cage
- Change Connection – Simply push in the desired shaft and twist the collar to remove
- Innovative cordless equipment for Site Prep, Placement, Coring, and more
-
Special Order Shipping
$2,670.99Features
- Redesigned 1-1/8″ Hex Tool Holder For Faster Accessory Insertion and Removal
- Wireless Tool Control technology
- Brushless motor delivers 41 Joules of Impact Energy for fast chipping of concrete
- DCH966Z2K comes Tag Ready,(sold separately) to track tool location via the DEWALT Tool Connect app.
- Shock Active Vibration Control system to minimize vibration
-
Free Shipping
$545.99Features
- easy to use control panel allows you to turn on the water supply with the flip of a switch. No manual pumping
- The water tank has two handles so users can comfortably move the water tank around the jobsite manually
- Users can attach the DEWALT Tag (sold separately) and track its location virtually anywhere via the DEWALT Site Manager app
- DCE6820B is compatible with T-Stak and Tough System Rolling Toolbox for mobility on the jobsite
- A 10 ft (3 m), kink-resistant, braided hose ensures durability and steady water flow
-
Free Shipping
$2,488.99Features
- DCE600D1K2 punches up to 10 gauge mild steel and 12 gauge stainless steel
- Threadless draw stud connection allows punch and die setup without weight of the tool
- Embedded magnets in dies for precise punch setup
- Inline body and 180° rotatable head allows maximum clearance in tight spaces
- 1/2” – 1-1/4” punches thread onto draw stud for punch and die setup
-
Free Shipping
$666.99Features
- Complete a wide variety of heating, cooling, and refrigeration workflows with this versatile solution
- Work fast and expand soft copper in as little as 2 seconds with the DCE450D1
- Maximize jobsite efficiency with 6 expansion head attachments including 3/8 in., 1/2 in., 5/8 in., 3/4 in., 7/8 in., and 1-1/8 in. (1/4 in., 5/16 in., and 1-5/8 in. sold separately
- Help prevent cracks in soft copper with the 3/8 in. expansion head that allows for a partial expansion in position 1 and a full expansion in position 2. The 1/4 in. and 5/16 in. expansion heads (sold separately) also feature the 2-stage adjustable collar
- Produce consistent, even swages suitable for brazing applications
-
Free Shipping
$2,913.99Features
- Drill up to a 2 in. hole through 2 in. of structural steel with the DCD1624GX2
- Match speed to the application with 5 variable settings for each of the 2 mechanical gears for a total of 10 speeds
- Quickly attach to steel with no electrical charge required
- Switch between bits with 3/4 in. Weldon-style shank and 5/8 in. Keyed Chuck with ease by using the Quick Change chuck system, no tools necessary
-
Free Shipping
$2,913.99Features
- DCE600D1K4 punches up to 10 gauge mild steel and 12 gauge stainless steel
- Threadless draw stud connection allows punch and die setup without weight of the tool
- Embedded magnets in dies for precise punch setup
- Inline body and 180° rotatable head allows maximum clearance in tight spaces
-
Free Shipping
$898.99Features
- CORDLESS EFFICIENCY: Cut through an 11 in. log 35% faster than a 35cc gas chainsaw with the DCCS674X2
- HELP MAXIMIZE PRODUCTIVITY: Slash downtime with up to 160 cuts per charge
- FAST CUTS: Cut through an 11 in. hickory log in as little as 11 seconds
- POWERFUL PERFORMANCE: Tackle demanding jobs with up to 2.42 HP
- HELP SIMPLIFY LOSS PREVENTION: As a part of the TOOL CONNECT system, this tool uses integrated Bluetooth technology to connect and control your inventory
-
Free Shipping
$423.99Features
- DCG410WW1 part of our most powerful line of 20V Max Angle Grinder
- Help Maximize Control-Equipped with the ANTI-ROTATION System that senses the rotational motion of the tool and shuts it down if the motion is excessive
- Take on tough jobs with a brushless motor engineered to deliver up to 1,590 MWO and 9,000 RPM (no load)
- This TOOL CONNECT CHIP READY (chip sold separately) tool connects with the TOOL CONNECT Site Manager app to help you track and manage assets
-
Free Shipping
$2,427.99Features
- Compact inline design for efficient one-handed jaw actuation
- Press up to 2″ Copper, Stainless-Steel, and Carbon Steel (Black Iron Pipe) press fittings
- 180° rotaing head to obtain optimal press angle
- Bright LED illumination of entire press location
- Tool Connect software to automatically track tools and equipment
-
Free Shipping
$302.99Features
- Take on a wide range of demanding applications with the DCD1007B our most powerful hammer drill
- Equipped with the ANTI-ROTATION System that senses the rotational motion of the tool and shuts it down if the motion is excessive.
- Access and maneuver in tight areas with the shortest length DEWALT premium 3-speed drill
- Help optimize runtime and performance with an all metal transmission
- Brighten your workspace with the pivoting 3-position, push-button LED featuring a 20-minute work light setting
-
Special Order Shipping
$958.99Features
- DCMWSP650Y2 offers a high efficiency cutting system with dual blades designed for runtime and cutting performance
- Up to 75 Minutes on runtime using both included batteries in succession**
- LED Dashboard communicates battery state of charge, cutting system difficulty, and blade end of life.
- Rugged, Durable Steel Deck design
- One touch Handle system quickly telescopes and folds unit between storage and operating positions
-
Free Shipping
$387.99Features
- DCF860WW1 now our highest torque impact driver – take on tough jobs with up to 66% more torque
- Fast, efficient performance – work efficiently with up to 63% faster driving
- Pro-level power – power through tough jobs with up to 2,500 in-lbs. Max torque and a no-load speed up to 3,800 RPM
- Built-in LEDs – 9 built-in LEDs and 20-minute work light setting provide additional illumination
- 1/4 in. quick-connect hex chuck – conveniently work with compatible 1/4 in. quick-connect hex chuck
-
Free Shipping
$2,913.99Features
- DCE210D2K features a compact inline design for efficient one-handed jaw actuation
- Press up to 2″ Copper, Stainless-Steel, and Carbon Steel (Black Iron Pipe) press fittings
- 180° rotating head to obtain optimal press angle
- Bright LED illumination of entire press location
- Tool Connect software to automatically track tools and equipment
-
Free Shipping
$423.99Features
- Take on a wide range of demanding applications with our most powerful 20V MAX
- DCD1007WW1 is equipped with the ANTI-ROTATION System that senses the rotational motion of the tool and shuts it down if the motion is excessive.
- Access and maneuver in tight areas with the shortest length DEWALT premium 3-speed drill.
- Help optimize runtime and performance with an all metal transmission
- Brighten your workspace with the pivoting 3-position, push-button LED featuring a 20-minute work light setting
-
Free Shipping
$1,112.99Features
- GEC03T delivers up to 45% More Power
- Up to 55% Less Vibration
- Large 3-1/2″ Cutting Depth, The Most within its class
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
- Electric brake stops the wheel in 2 seconds or less allowing for faster re-positioning
-
Oversized - Special Order
$3,628.99Features
- GMH04PL4X is the most powerful cordless breaker in its class
- Delivers up to 70% faster breaking than corded
- Demolishes up to an 8ft. x 6ft. x 4in. thick 5000 psi concrete slab on a single charge
- Anti-Vibration Technology (AVT) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce up to 30% less overall vibration
- Auto-start Wireless System (AWS) utilizes Bluetooth technology for wireless power-on/off communication between tool and dust extractor (AWS Transmitter sold separately)
-
Free Shipping
$611.99Features
- Depth gauge consistently strips cable up to 4 in.
- Strip #6 – 750 MCM Cu/Al Cable
- Included quick-release bushings allow you to quickly change bushings for each cable size
- DCE151TD1 offers a variable speed trigger with reverse for speed control
- Adjustable onboard LED light helps to provide illumination in dark or low light situations
-
Free Shipping
$1,704.99Features
- DCE155D1 cuts up to 1590 ACSR, 750 MCM Copper or 1000 MCM Aluminum
- Guillotine cutter maintains cable profile for easy connector installation
- Bright LED light helps to illuminate cutting area
- Field serviceable / replaceable blade
- LED light with 20 second delay provides visibility in dimly lit spaces
-
Free Shipping
$642.99Features
- DCG440X2 features an E-clutch that immediately shuts down the motor when a pinch/stall is detected
- Kick break engages with maximum force to quickly stop the wheel and shut off the grinder when a bind-up occurs
- Instant brake engagement when trigger is released
- Versatile pipeline grip gearcase cover
- Accepts Tool Connectchip (DCE042)
DCG440X2 Instruction Manual
-
Free Shipping
$750.99Features
- DCH293R2 produce up to 3.5 Joules of impact energy
- Clutch system protects the user by stopping rotation in bind up situations
- reduced vibration on handles
- OSHA Table 1 compliant when paired with DWH304DH On Board Extractor
- Lightweight design makes this tool ideal for structural connections, beam & column anchorage, rod hanging, seismic & safety attachments, cable tray & strut mounting, and steel stanchion mounting
-
Free Shipping
$1,018.99Features
- DCH832X1 produces up to 10.5 J of impact energy
- SHOCKS Active Vibration reduces vibration at the handle
- Midweight build makes it suitable for high-performance, horizontal chipping in upper to lower wall and bushing applications.
- 7-position variable speed control
- OSHA TABLE 1 COMPLIANT when used with the DCV585 Dust Extractor (sold separately)
