Showing 161–200 of 312 resultsSorted by popularity
-
Free Shipping
$1,014.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power and performance required for heavy-load applications
- Constant speed control automatically applies additional power under load for optimum performance
- Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- XGT® technology delivers up to 135 of 3/8″ holes using a fully charged 40V XGT® 4.0Ah battery*
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
-
Free Shipping
$1,092.99
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power performance required for heavy-load application
- Constant speed control automatically applies additional power under load for optimum performance
- Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- XGT® technology delivers up to 135 of 3/8″ holes per charge using full charged 40V XGT® 4.0Ah battery*
- Quick change chuck allows for interchangeability from SDS-PLUS to 1/2″ keyless chuck for utilization of straight shank bits
-
Free Shipping
$664.28
Features
- Makita-built brushless motor delivers 15,000 RPM for faster stock removal
- Delivers up to 38% faster planing speed
- Extreme Protection Technology XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- Capable of planing up to 311 ft. at 1/16″ depth using a fully charged 40V XGT® 4.0Ah battery
- Planes up to 3-1/4″ wide and 5/32″ deep in a single pass with the ability rabbet up to 1″ deep
-
Special Order Shipping
$1,030.99
Features
- FAST DRILLING IN CONCRETE with 4.5 J of impact energy
- System reduces vibration felt by the user at the handles comparted to rotary hammers without this feature
- System shuts down the tool in bind up situations
- when paired with DWH200D shroud and DCV585 dust extractor
- to quickly switch between drilling, hammer drilling, and chipping applications
-
Special Order Shipping
$1,395.99
Features
- RAPID DRILLING AND CHIPPING in hard concrete with 13.3 J of impact energy
- MAINTAIN SPEED UNDER HEAVY LOADS with constant speed electronics
- EFFICIENT PERFORMANCE AND RUNTIME with brushless motor and German-engineered mechanism
- PRO-GRADE VERSATILITY: Tackle horizontal and downward drilling for #6 – #9 rebar dowel applications, dry coring up to 5 in., chipping in any lower-to-mid wall, bushing, and ground rod driving
- REDUCED VIBRATION FOR COMFORTABLE GRIP with SHOCKS™ Active Vibration Control®
-
Free Shipping
$927.99
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
- Compact and ergonomic design at only 77″ long
- Weighs only 10.6 lbs. with battery for reduced operator fatigue
-
Free Shipping
$681.99
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
- Compact and ergonomic design at only 77″ long
- Weighs only 10.6 lbs. with battery for reduced operator fatigue (battery not included)
-
Free Shipping
$802.99
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode (battery not included)
- Compact and ergonomic design at only 99″ long
- Weighs only 17.2 lbs. with battery for reduced operator fatigue (battery not included)
-
Free Shipping
$600.99
Features
- Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the accessory is suddenly forced to stop
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,400/ 0-2,600/ 0-3,600/ 0-4,100 IPM) provides 1,860 in.lbs. of Max Torque
- Tightening Mode (T-mode) for faster tightening of self-drilling screws in thick or thin gauge metal
-
Free Shipping
$390.99
Features
- Delivers corded performance with cordless convenience
- Compact sanding arm pivots up to 160° for compact storage
- L.E.D. light adjusts to match angle of the sanding arm or shape of the workspace
- Electric brake allows the tool to be repositioned faster for maximum productivity
- Versatile for use in wood and steel applications
-
Free Shipping
$684.99
Features
- Delivers corded performance with cordless convenience
- Compact sanding arm pivots up to 160° for compact storage
- L.E.D. light adjusts to match angle of the sanding arm or shape of the workspace
- Electric brake allows the tool to be repositioned faster for maximum productivity
- Versatile for use in wood and steel applications
-
Free Shipping
$1,192.99
Features
- Makita-built motor delivers up to 15,500 VPM to help increase strength of concrete
- Two-power mode selection (normal/power) allows the use of the tool for a wide range of job site applications: Concrete compaction of floors, pillars, and mat foundations
- Up to 45 minutes of run time in power mode and 60 minutes of run time in normal mode
- Compact and ergonomic design at only 99″ long
- Weighs only 17.2 lbs. with battery for reduced operator fatigue
-
Special Order Shipping
$363.99
Features
- Up to 22% More Power vs. PorterCable® Corded Belted Sander (352VS): Ability to complete applications that of a corded sander
- Up to 95% Dust Collection Efficiency : DEWALT AirLock compatible dust collection designed to minimize dust exposure to user and workspace
- Variable Speed Trigger w/Lock On 25-Speed Selection Dial: Allows for control on various sanding applications
- Over- Molded Auxiliary Handle: Allows for two-handed operation and grip for scribing applications
- Quick Release Belt Change: Quick release system allows sand paper to be changed easily
-
Free Shipping
$645.99
Features
- Powerful motor design drives standard 16 gauge, straight finish nails from 1″ to 2-1/2″ in length
- Compact center height enables viewing around the nose tip when fastening in tight spots
- Anti-dry fire mechanism engineered to help prevent driving blanks and damage to work surface
- Built-in L.E.D. light illuminates the work area
- Reversible belt clip allows the tool to remain close
-
Special Order Shipping
$545.99
Features
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
-
Special Order Shipping
$545.99
Features
- Micro nose improves line of sight and accuracy of nail placement
- Brushless motor maximizes runtime and durability
- 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Tool-free selectable trigger for sequential or contact actuation modes
- Tool-free depth adjustment for precise countersinking of nails
-
Special Order Shipping
$1,005.99
Features
- Gas-free operation eliminates the need for fuel cells and provides a consistent, powerful alternative that operates on the DEWALT 20V MAX battery platform
- Variable power settings allow for pin depth adjustment and substrate versatility
- Field-serviceable driver blade reduces downtime of tool
- Comparable application speed to gas concrete nailers
- Dual LED worklights help illuminate work surface and provide onboard diagnostics
-
Special Order Shipping
$423.99
Features
- 1- 1/8″ diameter vibrator delivers maximum consolidation power.
- 4 foot long flexible shaft for easy use and long reach.
- 14,000 VPM (under load) delivers maximum consolidation efficiency.
-
Special Order Shipping
$605.99
Features
- 1 – 1/8″ diameter vibrator delivers maximum consolidation power.
- 4 foot long flexible shaft for easy use and long reach.
- 14,000 VPM [under load] delivers maximum consolidation efficiency.
-
Special Order Shipping
$164.99
Features
- Three power sources for on the go [20V MAX battery, 12V DC, or 110V AC]
- Convenient onboard accessory storage
- Heavy-duty rubber feet help reduce walking when in use
- Threaded chuck for secure connection to inflation valve
- High-pressure inflation mode with automatic shutoff
-
Special Order Shipping
$448.99
Features
- Dewalt DCN680D1 is 100% battery powered. Eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
- Tool-free depth adjustment for precise countersinking of nails
- Tool-free jam release to quickly and easily clear nail jams
-
Free Shipping
$884.99
Features
- Makita built brushless motor with two speed, variable speed (0-400 RPM and 0-1,500 RPM) for maximum efficiency and a wide range of drilling applications
- Drills up to 6-1/4″ holes with hole saws and 4-5/8″ holes with self feed bits
- Weighs only 11.9 lbs. with battery and ergonomic design for operator comfort
- Torque limiter; built-in clutch reduces gear damage by disengaging gears if the bit binds
- Built-in L.E.D light with pre-glow and afterglow illuminates the work area
-
Special Order Shipping
$177.99
Features
- Lightweight and compact for ultimate portability
- Ergonomics optimized for one-handed use
- Brushless motor for enhanced performance and extended life
- LED to help illuminate dark workspaces
- Variable-speed trigger provides user with improved speed control
-
Special Order Shipping
$662.99
Features
- Fast Drilling in Concrete With 2.1 joules of impact energy
- OSHA Table 1 Compliant when paired with DWH303DH on-board extractor
- Shocks Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature
- mechanism and brushless motor for efficient performance and runtime.
- Lightweight Design makes this tool ideal for rod hanging, seismic & safety attachments, cable tray & strut mounting, clamp mounting, and rail mounting.
-
Special Order Shipping
$326.99
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable speed control from 8,000 – 12,000 OPM to match the speed to the application.
- Low profile height allows user to get close to work surface for precise sanding.
- Replaceable 8-hole hook-and-loop sanding pad (DWE64233) for quick, easy paper changing.
- Dust-sealed switch to protect against dust ingestion for long switch life.
-
Special Order Shipping
$196.99
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable-speed control from 8,000 to 12,000 OPM to match the speed to the application.
- Low-profile height allows user to get close to work surface for precise sanding.
- Replaceable 8-hole hook-and-loop sanding pad (DWE64233) for quick, easy paper changing.
- Dust-sealed switch to protect against dust ingestion for long switch life
-
Special Order Shipping
$564.99
Features
- 1800 Watt Portable Power Station
- 4 Port Simultaneous Charger
- Four 20V MAX* batteries in (including FLEXVOLT), 15 amps ou
- Batteries and extension cord sold separately
- Runs most variable speed power tools
-
Special Order Shipping
$164.30
Features
- Brushless motor provides runtime and efficiency to get the job done
- Variable speed control from 8,000 – 14,000 OPM to match the speed to the application
- Low profile height allows user to get close to work surface for precise sanding
- Paper clamp designed to hold paper securely and allow for easy installation
- Dust-sealed switch to protect against dust ingestion for long switch life
-
Free Shipping
$660.99
Features
- Provides spark-free cuts that are clean and burr-free for easy hand-threading of fastener or nut
- Up to 1,300 cuts of 3/8” mild steel threaded rod and 1,200 cuts of 3/8” stainless steel threaded rod with one 18V LXT 5.0Ah battery (battery not included)
- Ideal for overhead cutting of installed threaded rod including 1/4″ and 3/8″ coarse thread diameter sizes
- Ergonomically designed handle provides a more comfortable hand position for increased comfort and less fatigue
- Compact design at only 7-7/8″ long and weighs only 7 lbs. with battery (battery not included)
-
Special Order Shipping
$514.99
Features
- Able to cut 1/4″, 3/8″, 1/2″ Mild Steel Coarse Threaded Rod
- Able to cut 1/4″, 3/8″ Stainless Steel Coarse Threaded Rod
- Clean, burr-free cuts allowing for easy threading
- Bright LED light to help illuminate cutting area
- Rotating cutter allows you to cut multiple sizes of rod with one cutting die
-
Special Order Shipping
$95.99
Features
- Three speed settings (High/Medium/Low)
- Designed for reduced wind noise level for quiet operation
- Tilts up and down for convenient redirection of air flow
- Adjustable hook for easy handling and hanging
- Battery Protection Circuit protects against overloading, over-discharging and over-heating
