Showing 41–80 of 308 results
-
Oversized - Special Order
$1,206.25
Features
- Up to 100 minutes of run time with two 18V LXT® 5.0Ah batteries (batteries sold separately)
- Powered by (1) 18V LXT® battery with the option to insert (1) additional battery for extended run time (batteries sold separately)
- Makita-built brushless motor for optimal performance
- 290 lbs. maximum load capacity
- Steel bucket provides 3 cu. ft. capacity
-
Standard Shipping
$155.99
Features
- 2-mode operation: delivers 750 lumens on High mode or 450 lumens on Low mode
- Up to 10 hours of continuous illumination with a 6.0Ah 18V LXT® battery on High mode (battery and charger not included)
- Up to 20 hours of continuous illumination with a 6.0Ah 18V LXT® battery on Low mode (battery and charger not included)
- L.E.D. lights effectively illuminate work area without the high heat of halogens
- Adjusting knobs enable the user to direct the flood light to desired angle
-
Free Shipping
$210.99
Features
- Mechanical 2-speed transmission (0-500 & 0-1,900 RPM) for a wide range of drilling and fastening applications
- Makita-built brushless motor delivers 440 in.lbs. of Max Torque
- Weighs only 3.6 lbs. with battery for reduced operator fatigue
- Built-in dual L.E.D. lights with afterglow illuminate the work area
- 3-year limited warranty on tool, battery and charger
-
SALEÂ 19% OFF
Free Shipping
$518.17 Original price was: $518.17.$421.01Current price is: $421.01.
Features
- Brushless motor delivers up to 565 CFM and 143 MPH
- Up to 35 minutes of run time with 40V XGT? 4.0Ah battery
- Cruise control lever with variable speed trigger adjusts between 0 – 476 CFM
- 3-stage telescoping long nozzle
- Speed lock for convenient and continuous operation
-
Free Shipping
$2,973.66
The PJRC160 is a professional grade cordless brushless re-bar cutter with a 360 degree rotatable head.
-
Special Order Shipping
$2,460.93
Features:
- 5 times faster than manual tying
- Lightweight and compact body for easy maneuvering and one handed operation
- Li-ion battery can complete 2600 ties per charge
- Ties approximately 120 times per coil.
- Brushless twisting motor
-
Special Order Shipping
$4,076.97
FEATURES
- REDUCES BACK STRAIN – The RB401T-E is an ergonomic solution for backbreaking slab work.
- ADJUSTABLE HANDLES – Users can adjust the handles to 2 positions, to find the most comfortable fit for their height.
- TRIGGERLESS TECHNOLOGY – An automatic contact mechanism (Pat. Pending) allows the tool to instantly tie when pushed down over a rebar intersection.
- SHORTER TIE HEIGHT (Pat. Pending) – A Wire Bending Mechanism produces a shorter tie height. Less concrete is needed to fully cover a wire tie.
- ENCLOSED DESIGN – Greater protection against debris and moisure entering the tool.
- QUICKLY & EASILY LOAD TIE WIRE – Rapidly load the dual wire coil with the quick load magazine design.
-
SALEÂ 19% OFF
Rated 5.00 out of 5
Free Shipping
$1,193.51 Original price was: $1,193.51.$969.73Current price is: $969.73.
Features:
- 18V 5Ah Battery Fully Charged in 45 Minutes with Dual Port Rapid Charger Included
- Includes 4 Batteries
- Only 13.9lbs and Zero Emissions
- Low maintenance, no gas/oil mixes, no pull starts
- Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
- Integrated water delivery system continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications
-
Free Shipping
$2,680.11
The RB518 is a battery operated rebar tying tool that can tie #5 x #5 to #7 x #8 rebar. You will save time, save money and increase productivity with this handy cordless tool. MAX Re-Bar-Tiers are also proven to reduce the risk of developing musculoskeletal diseases.
-
New Product
Free Shipping
$2,488.99
Features
- DCE600D1K2 punches up to 10 gauge mild steel and 12 gauge stainless steel
- Threadless draw stud connection allows punch and die setup without weight of the tool
- Embedded magnets in dies for precise punch setup
- Inline body and 180° rotatable head allows maximum clearance in tight spaces
- 1/2” – 1-1/4” punches thread onto draw stud for punch and die setup
-
New Product
Free Shipping
$666.99
Features
- Complete a wide variety of heating, cooling, and refrigeration workflows with this versatile solution
- Work fast and expand soft copper in as little as 2 seconds with the DCE450D1
- Maximize jobsite efficiency with 6 expansion head attachments including 3/8 in., 1/2 in., 5/8 in., 3/4 in., 7/8 in., and 1-1/8 in. (1/4 in., 5/16 in., and 1-5/8 in. sold separately
- Help prevent cracks in soft copper with the 3/8 in. expansion head that allows for a partial expansion in position 1 and a full expansion in position 2. The 1/4 in. and 5/16 in. expansion heads (sold separately) also feature the 2-stage adjustable collar
- Produce consistent, even swages suitable for brazing applications
-
New Product
Free Shipping
$2,913.99
Features
- Drill up to a 2 in. hole through 2 in. of structural steel with the DCD1624GX2
- Match speed to the application with 5 variable settings for each of the 2 mechanical gears for a total of 10 speeds
- Quickly attach to steel with no electrical charge required
- Switch between bits with 3/4 in. Weldon-style shank and 5/8 in. Keyed Chuck with ease by using the Quick Change chuck system, no tools necessary
-
New Product
Free Shipping
$2,913.99
Features
- DCE600D1K4 punches up to 10 gauge mild steel and 12 gauge stainless steel
- Threadless draw stud connection allows punch and die setup without weight of the tool
- Embedded magnets in dies for precise punch setup
- Inline body and 180° rotatable head allows maximum clearance in tight spaces
-
New Product
Free Shipping
$898.99
Features
- CORDLESS EFFICIENCY: Cut through an 11 in. log 35% faster than a 35cc gas chainsaw with the DCCS674X2
- HELP MAXIMIZE PRODUCTIVITY: Slash downtime with up to 160 cuts per charge
- FAST CUTS: Cut through an 11 in. hickory log in as little as 11 seconds
- POWERFUL PERFORMANCE: Tackle demanding jobs with up to 2.42 HP
- HELP SIMPLIFY LOSS PREVENTION: As a part of the TOOL CONNECT system, this tool uses integrated Bluetooth technology to connect and control your inventory
-
New Product
Free Shipping
$423.99
Features
- DCG410WW1 part of our most powerful line of 20V Max Angle Grinder
- Help Maximize Control-Equipped with the ANTI-ROTATION System that senses the rotational motion of the tool and shuts it down if the motion is excessive
- Take on tough jobs with a brushless motor engineered to deliver up to 1,590 MWO and 9,000 RPM (no load)
- This TOOL CONNECT CHIP READY (chip sold separately) tool connects with the TOOL CONNECT Site Manager app to help you track and manage assets
-
New Product
Free Shipping
$2,427.99
Features
- Compact inline design for efficient one-handed jaw actuation
- Press up to 2″ Copper, Stainless-Steel, and Carbon Steel (Black Iron Pipe) press fittings
- 180° rotaing head to obtain optimal press angle
- Bright LED illumination of entire press location
- Tool Connect software to automatically track tools and equipment
-
New Product
Free Shipping
$302.99
Features
- Take on a wide range of demanding applications with the DCD1007B our most powerful hammer drill
- Equipped with the ANTI-ROTATION System that senses the rotational motion of the tool and shuts it down if the motion is excessive.
- Access and maneuver in tight areas with the shortest length DEWALT premium 3-speed drill
- Help optimize runtime and performance with an all metal transmission
- Brighten your workspace with the pivoting 3-position, push-button LED featuring a 20-minute work light setting
-
New Product
Free Shipping
$387.99
Features
- DCF860WW1 now our highest torque impact driver – take on tough jobs with up to 66% more torque
- Fast, efficient performance – work efficiently with up to 63% faster driving
- Pro-level power – power through tough jobs with up to 2,500 in-lbs. Max torque and a no-load speed up to 3,800 RPM
- Built-in LEDs – 9 built-in LEDs and 20-minute work light setting provide additional illumination
- 1/4 in. quick-connect hex chuck – conveniently work with compatible 1/4 in. quick-connect hex chuck
-
New Product
Free Shipping
$2,913.99
Features
- DCE210D2K features a compact inline design for efficient one-handed jaw actuation
- Press up to 2″ Copper, Stainless-Steel, and Carbon Steel (Black Iron Pipe) press fittings
- 180° rotating head to obtain optimal press angle
- Bright LED illumination of entire press location
- Tool Connect software to automatically track tools and equipment
-
New Product
Free Shipping
$423.99
Features
- Take on a wide range of demanding applications with our most powerful 20V MAX
- DCD1007WW1 is equipped with the ANTI-ROTATION System that senses the rotational motion of the tool and shuts it down if the motion is excessive.
- Access and maneuver in tight areas with the shortest length DEWALT premium 3-speed drill.
- Help optimize runtime and performance with an all metal transmission
- Brighten your workspace with the pivoting 3-position, push-button LED featuring a 20-minute work light setting
-
New Product
Free Shipping
$1,112.99
Features
- GEC03T delivers up to 45% More Power
- Up to 55% Less Vibration
- Large 3-1/2″ Cutting Depth, The Most within its class
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
- Electric brake stops the wheel in 2 seconds or less allowing for faster re-positioning
-
New Product
Oversized - Special Order
$3,628.99
Features
- GMH04PL4X is the most powerful cordless breaker in its class
- Delivers up to 70% faster breaking than corded
- Demolishes up to an 8ft. x 6ft. x 4in. thick 5000 psi concrete slab on a single charge
- Anti-Vibration Technology (AVT) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce up to 30% less overall vibration
- Auto-start Wireless System (AWS) utilizes Bluetooth technology for wireless power-on/off communication between tool and dust extractor (AWS Transmitter sold separately)
-
New Product
Free Shipping
$611.99
Features
- Depth gauge consistently strips cable up to 4 in.
- Strip #6 – 750 MCM Cu/Al Cable
- Included quick-release bushings allow you to quickly change bushings for each cable size
- DCE151TD1 offers a variable speed trigger with reverse for speed control
- Adjustable onboard LED light helps to provide illumination in dark or low light situations
-
New Product
Free Shipping
$1,704.99
Features
- DCE155D1 cuts up to 1590 ACSR, 750 MCM Copper or 1000 MCM Aluminum
- Guillotine cutter maintains cable profile for easy connector installation
- Bright LED light helps to illuminate cutting area
- Field serviceable / replaceable blade
- LED light with 20 second delay provides visibility in dimly lit spaces
-
New Product
Free Shipping
$642.99
Features
- E-clutch that immediately shuts down the motor when a pinch/stall is detected
- Kick break engages with maximum force to quickly stop the wheel and shut off the grinder when a bind-up occurs
- Instant brake engagement when trigger is released
- Versatile pipeline grip gearcase cover
- Accepts Tool Connectchip (DCE042)
-
Free Shipping
$750.99
Features
- DCH293R2 produce up to 3.5 Joules of impact energy
- Clutch system protects the user by stopping rotation in bind up situations
- reduced vibration on handles
- OSHA Table 1 compliant when paired with DWH304DH On Board Extractor
- Lightweight design makes this tool ideal for structural connections, beam & column anchorage, rod hanging, seismic & safety attachments, cable tray & strut mounting, and steel stanchion mounting
-
Free Shipping
$1,018.99
Features
- DCH832X1 produces up to 10.5 J of impact energy
- SHOCKS Active Vibration reduces vibration at the handle
- Midweight build makes it suitable for high-performance, horizontal chipping in upper to lower wall and bushing applications.
- 7-position variable speed control
- OSHA TABLE 1 COMPLIANT when used with the DCV585 Dust Extractor (sold separately)
-
Free Shipping
$1,146.99
Features
- DCH892X1 produces up to 19.4 J of impact energy
- SHOCKS Active Vibration Control system to reduce vibrations at handle
- Wireless Tool Control technology enables remote extractor activation for simultaneous activation and deactivation while you work
- OSHA TABLE 1 COMPLIANT when used with the DCV585 Dust Extractor (sold separately)
- 7-position variable speed control
-
New Product
Free Shipping
$1,213.99
Features
- DCH614X2 produces 10.5 Joules of impact energy for fast drilling and chipping, even in the hardest concrete
- Anti-Rotation E-CLUTCH System shuts down the tool in bind up situations
- Constant speed electronics allows the tool to maintain speed under load
- The Shocks Active Vibration Control System reduces vibration felt by the user at the handles, compared to rotary hammers without this feature
- The midweight design makes it ideally suited for horizontal drilling for #4 – #8 rebar dowel applications and dry coring up to 4 in
-
Free Shipping
$387.99
Features
- DCG415W1 features up to 40% more power maximize your tool”s performance with high-capacity XRbatteries
- Built-in kickback brake engages with full force to quickly stop the wheel and shut off the grinder when a pinch, stall, or bind-up occurs
- Trigger switch must be cycled (turned off and then on) in the event of a power outage or other unexpected shut down to restart tool
- System activates and shuts down the motor in less than a tenth of a second when a pinch/stall is detected
-
Free Shipping
$392.99
Features
- DCD998W1 using the 20V MAX* 8Ah battery will output up to 29% more power
- DCD998 has a 3-mode LED with spotlight mode for a 20 minute shutoff function allowing for extended work time in dark or confined spaces
- The DCD998 Hammer Drill has 3-speeds, high performance, all-metal transmission to optimize tool-to-task for fast application speeds and improved run-time for drilling in masonry materials
- Heavy-duty 1/2 in. ratcheting nitro-carburized metal chuck with carbide inserts for superior bit gripping strength
-
Free Shipping
$845.99
Features
- Improved runtime, durability, and less maintenance with a brushless motor
- Easy access to confined spaces and hard-to-reach areas with a telescoping shaft
- Wireless ON/OFF capability when paired with a compatible dust extractor via Wireless Tool Control
- Quick, secure, and tool-free connection to DEWALT Dust Extractors via Airlock
- Additional control with the variable speed dial
-
Free Shipping
$545.99
Features
- optimized tools to withstand daily jobsite wear and tear
- [Reciprocating saw] 5,250 RPM motor delivers power and speed to make the most demanding cuts with ease
- [Compact Drill] delivers 2 speeds (0-600 & 0-2, 000 rpm) for a range of fastening and drilling applications
- [Work Light] Features Integral hook for hands-free use in multiple placements
-
Free Shipping
$928.99
Features
- DGN845B includes a standard contact trip. Also compatible with the magnetic and Stick-E interchangeable contact trips (sold separately).
- Shared Pin Collation – Tool design allows for fasteners to be used in the Trak-It C6 as well as the DCN890 and DCN891.
- Improved Fuel Cell – Fastens up to 443 Linear Feet of Drywall track
- Innovative power tools designed to deliver certainty for the world’s toughest pros
- Track and manage this TOOL CONNECT CHIP-READY product (chip sold separately) in the TOOL CONNECT system
-
Standard Shipping
$51.99
Features
- Remote-Control Adjustments – Help maximize jobsite efficiency by making precise horizontal or vertical line adjustments with a remote control range up to 330 ft. (100m)
- Sleep Mode – Help optimize battery performance with its sleep mode that automatically activates after 60 seconds of non-use
- Jobsite Ready – Power your Remote Control with the included (2) AA batteries
-
Free Shipping
$269.99
Features
- Dual-voltage for ultimate flexibility 180 watt hours of energy in each battery pack
- Get 360 watt hours when using (2) FLEXVOLT 9.0 Ah batteries in 120V MAX* tools
- 6X runtime** when used in a 20V MAX* tools
- Runs cooler than leading competitor 9.0 Ah battery for better efficiency
- Compatible with all 20V MAX* chargers Compatible with all 20V MAX
-
Free Shipping
$284.99
Features
- The Power of Corded with the Flexibility of cordless
- 4X The Runtime of DCB201 1.5Ah Battery
- 3X The Power of DC9096 18V Battery
- Tri-Platform compatibility with 20V MAX*, 60V MAX* and 120V MAX*
- Durable construction with single piece cell holder
-
Free Shipping
$341.99
Features
- 12.0 Ah capacity for maximum runtime
- Compatible with 20V MAX*, 60V MAX*, and 120V MAX* tools
- Compatible with all 20V MAX* Chargers
- 3-LED Fuel Gauge Charge Indicator
- Operates in outside temperatures down to 0°F
-
Free Shipping
$341.99
Features
- 20-Volt MAX 5.0Ah XR Lithium Ion battery X2, provides up to 10 Amp hours of capacity
- Charges all 12-Volt, 20-Volt and 60-Volt DEWALT MAX batteries at a 4 Amp charge rate
- 3-LED fuel gauge system allows immediate feedback on state of charge
- XR Lithium Ion pack provides up to 60% more capacity than standard 20V MAX* battery pack (DCB200)
- 3-LED Fuel Gauge allows immediate feedback on state of charge