Showing 201–240 of 5429 resultsSorted by popularity
-
Standard Shipping
$18.09
Features:
- Textured grip channels oil and soap away from fingers, giving a better grip
- 100% nitrile provides resistant to many chemicals used in industrial applications
- Increased puncture resistance outlasts conventional disposables which helps reduce waste
- Rolled cuff adds additional strength to cuff edge for longer glove life and prevents liquid run-off
- Ambidextrous for quick and easy donning
- Powder Free for clean comfort and superior tactile sensitivity
- Contains no natural rubber latex proteins
- Complies with FDA food handling requirements 21 CFR, Part 177
-
SALEÂ 34% OFF
Standard Shipping
$10.99 Original price was: $10.99.$7.29Current price is: $7.29.
Features:
- 10 PACK – 10 Blades per unit
- Up to 70% faster cutting compared to standard blades
- High grade Tungsten carbide tips for durability
- Blade coating provides reduced pitch build-up
- Reduced swing width
- Top bevel angle with 23° tip for a smoother cut
Minimum order quantity: 10
Order in multiples of: 10
-
Special Order Shipping
$51.84
-
Special Order Shipping
$14.92
POWER TROWEL STONE,4X2X2,6 GR
-
Special Order Shipping
$33.11
1-3/8in PB OCT INSERT HANDLE, 72in BLUE
Minimum order quantity: 6
Order in multiples of: 6
-
Special Order Shipping
$37.59
BROKEN-IN MAGNESIUM FLOAT
Minimum order quantity: 6
Order in multiples of: 6
-
Special Order Shipping
$14.24
-
Special Order Shipping
$99.47
-
Standard Shipping
$5.53
Features:
- Chamfered top designed to prevent mushrooming during installation
- Qualified for static and seismic loading conditions (seismic design categories A through F)
- Suitable for horizontal, vertical and overhead applications
- Qualified for minimum concrete thickness of 3-1/4 in., and lightweight concrete-over-steel deck thickness of 2-1/2 in. and 3-1/4 in.
- Tested per ACI355.2 and AC193
-
Standard Shipping
$3.00
Features:
- Replaces additional framing and toe-nailing
- Suitable for most installations on nominal 2×10 or 2×12 header/rim board
- May be installed flush with the top of the carrying member or lower on the face
- Interchangeable for left or right applications
- Made from 18-gauge steel
-
![TW1061T-PC-[Roll]](https://www.heydensupply.com/wp-content/uploads/2021/01/max-tw1061t-pc-poly-coated-tie-wire-1.jpg)
Free Shipping
$640.99
Features:
- Poly Coated Wire Resists Rust and Corrosion
- Use with epoxy coated rebar
- 19 Guage Rebar Tie Wire
- For use with MAX RB441T TwinTier and RB401T-E TwinTier
-
$399.17
Features:
-
Free Shipping
$224.99
Features:
- Variable speed control dial to match the speed to the application
- Smooth rack-and-pinion fine depth adjustment system for more precise settings
- Slim and ergonomically designed body with rubberized grip
- Soft start feature for smoother start-ups and better accuracy
- Electronic speed control maintains constant speed under load
-
Standard Shipping
$47.69
Features:
- Nitrile MicroFoam coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance
- Seamless one-piece nylon shell offers increased comfort, finger dexterity and breathability
- Knit Wrist helps prevent dirt and debris from entering the glove
- Silicone and Latex free
- Surface of the glove designed to “channel” oil away to give a better grip
- Light coating gives improved flexibility and dexterity
- Minimal strikethrough reduces irritation and increases comfort levels
- Designed to produce minimal lint and dust
- This glove has been laundered prior to final packaging making it clean and safe for use
- The Oeko-Tex? Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin
- This style is also available tri-folded and shrink-wrapped for carefree dispensing through vending machines (34-800V)
-
Special Order Shipping
$110.99
Features:
- Has a .472 inch impregnated diamond segment for longer life, smoother finish and faster cutting
- Alternating turbo segment for cut speed, and plain segment for life
- Ventilated steel center with cooling holes to reduce heat when cutting
- Laser cut dual arbor for consistent fit on high-speed, masonry, and walk-behind saws
-
SALEÂ 20% OFF
Free Shipping
$219.99 Original price was: $219.99.$176.35Current price is: $176.35.
Features
- Powerful 7 amp motor
- Torque limiting clutch engineered to prevent gear damage
- Variable speed trigger
- 40 bit angle settings
- One-touch sliding chuck for quick bit changes
-
Standard Shipping
$12.79
Features
- ZMAX® galvanization with a black powder coat offers extra corrosion resistance for exterior and treated-wood applications
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
-
Standard Shipping
$48.19
APHH heavy hangers connect 4x and 6x beams to girders. These concealed-flange hangers feature straight edges and provide a cleaner-looking installation for joist connections. Available in a range of sizes, the hangers install easily to the joist with the Outdoor Accents® structural wood screw and hex-head washer, and to the header with the Strong-Drive® SDS…
-
Standard Shipping
$2.69
Features
- Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look
-
Standard Shipping
$24.49
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$38.59
Features:
- Seamless construction offers increased comfort and breathability
- PolyKor? blended shell is lightweight and provides excellent dexterity, tactile sensitivity, and cut resistance
- Polyurethane coatings take on the surface properties of the glove liner providing a tactile grip in dry and slightly oily conditions, ideal for applications that require dexterity for precise handling
- Knit Wrist helps prevent dirt and debris from entering the glove
- Color coded hems for easy size identification
- Washable, resistant to chemicals, water, and ultraviolet light
-
Free Shipping
$172.60
Features:
- Made of carbon steel wire
- Tangle-free unwinding
- Full case count – 20 rolls
-
Special Order Shipping
$62.81
9 1/2in BRICK TROWEL PHILADELPHIA PATTERN – DURACORK HANDLE
-
Special Order Shipping
$65.27
BRICK TROWEL
Minimum order quantity: 2
Order in multiples of: 2
-
Special Order Shipping
$59.74
SCOOP,# 2,EASTERN,HB,48in ASH H
-
Special Order Shipping
$9.96
-
Special Order Shipping
$9.04
-
Special Order Shipping
$59.01
-
Special Order Shipping
$33.94
POWER TROWEL BLADE-8 X 16 COMB
Minimum order quantity: 4
Order in multiples of: 4
-
Special Order Shipping
$33.47
-
Special Order Shipping
$35.64
BULL FLT GROOVER ATTACH, 3/4in
-
Standard Shipping
$39.90
Features
- PFM1411100 is designed for standard ANSI tolerance drill bits
- Patented thread design offers low installation torque
- Tough threads for tapping high strength concrete
- Ratchet teeth on underside of hex washer head lock against the fixture
- Can be installed closer to the edge than traditional expansion anchors
-
Standard Shipping
$71.20
Features
- Radians RWG533 18 gauge green High Performance Polyethylene (HPPE) provides cut resistance
- Black sandy foam nitrile palm coating provides protection from abrasion in wet or dry conditions
- Seamless cuff design provides a comfortable fit
- Tested to EN 388 standards for Abrasion Resistance, Blade Cut, Tear, and Puncture ( 4 3 4 1)
- ANSI Cut Level A2, EN388 Cut Level 3
-
Standard Shipping
$101.59
Features
- Designed to meet stringent building codes for seismic or high-wind events
- Slotted for adjustability
- Features 1″ standoff to help prevent rot at post end
- Outdoor Accents side plates available (see APVBDSP)
- Fastener holes are slightly offset to help prevent fastener interference
-
Standard Shipping
$317.99
Features
- UP TO 77% MORE POWER** when paired with FLEXVOLT® batteries
- FASTER CUTTING: Powerful brushless motor delivers 5,500 RPM for faster cutting
- Maximum depth of cut of 2-9/16 in. at a 90°
- Maximum depth of cut of 2 in. at a 45°
- ELECTRIC BRAKE stops the blade after the trigger is released
- INCREASED VISIBILITY: Bright LED increases visibility and cut accuracy
- EASY STORAGE: Integrated rafter hook for quick and easy storage
- MINIMIZES DUST: Optional dust port allows connection to a dust extractor to minimize dust during cutting (DWE575DC Dust Port sold separately).
-
Free Shipping
$240.99
Features
- Makita MP001GZ01 powerful Cordless High-Pressure Inflator delivers up to 160 PSI
- High visibility pressure gauge display with back light
- Auto-stop function automatically stops inflation
- Three speed settings (High/Medium/Low)
- 25-1/2in hose length
-
Special Order Shipping
$7.69
-
Special Order Shipping
$7.72
MASONftS ACID BRUSH W/THREADED HOLE
-
Special Order Shipping
$9.34
THREADED HANDLE CLEVIS ADAPTER
