Showing 1041–1080 of 5429 resultsSorted by popularity
-
Oversized Shipping
$17,356.99
Features
- ET3G10 is suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
- Ideal for general doweling and threaded rod applications
- Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
-
Free Shipping
$21,228.00
Features
- SET3G10 REPLACES SET-XP10
- Sustained load performance at elevated temperature.
- Can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
- Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
- Approved for installation with multiple vacuum-drill bit systems without further hole cleaning.
See Code Report (ESR-4057) and Engineering Letter for approved systems.
-
Free Shipping
$749.69
Features
- SET3G56 has exceptional performance — superior bond strengths permit ductile solutions in high seismic areas.
- Design flexibility — improved sustained load performance at elevated temperature.
- Jobsite versatility — can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
- Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
- Approved for installation with multiple vacuum-drill bit systems without further hole cleaning. See Code Report (ESR-4057) and Engineering Letter for approved systems.
-
Standard Shipping
$29.39
Features
- SET3G10 REPLACES SET-XP10
- Sustained load performance at elevated temperature.
- Can be specified for all base material conditions when in-service temperatures range from -40°F (-40°C) to 176°F (80°C).
- Recognized per ICC ES AC308 for post-installed rebar development and splice length design provisions.
- Approved for installation with multiple vacuum-drill bit systems without further hole cleaning.
See Code Report (ESR-4057) and Engineering Letter for approved systems.
-
Oversized Shipping
$11,108.49
Features
- AT3G10 is excellent for use in cold weather conditions or applications where fast cure is required
- Recognized per ICC-ES AC308 for threaded rod and rebar anchoring, along with post-installed rebar development and splice length design provisions
- Conventional blow-brush-blow hole cleaning technique using a wire brush — no power brushing required
- Base material installation temperatures down to 0°F (-18°C)
- Use in grout-filled CMU construction
-
Standard Shipping
$97.39
Features
- ET3G56 is suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
- Ideal for general doweling and threaded rod applications
- Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
-
Free Shipping
$539.89
Features
- Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
- Ideal for general doweling and threaded rod applications
- Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
-
Oversized Shipping
$14,070.79
Features
- ET-3G22-N is suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
- Ideal for general doweling and threaded rod applications
- Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
-
Standard Shipping
$22.39
Features
- ET3G10 is suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
- Ideal for general doweling and threaded rod applications
- Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
-
Free Shipping
$738.99
Features
- Dewalt DCS374P2 features LED Work Light with 20 second delay illuminates dark work surfaces for accurate cutting.
- Tool less blade changing lever loosens blade tension for easy blade changes
- Variable Speed for versatility and control
- DEWALT built brushless motor for performance and durability
- 5″ Cutting Capacity
-
Free Shipping
$629.99
Features
- Keyless lever-action blade clamp for quick and easy blade changes
- Variable-speed trigger allows user to instantly control speed
- Pivoting shoe provides leverage for different applications
- LED helps illuminate dark jobsite work areas
- Rubber overmold grip for comfort
-
Free Shipping
$572.99
Features
- Dewalt DCF900P2 features a Battery Guard
- On tool LED light
- 030 ft-lbs of max fastening torque and 1400 ft-lbs of max breakaway torque.
- 4-mode speed settings and variable speed trigger.
- Precession Wrench Control
-
Standard Shipping
$4.09 – $18.65
Features
- Meets ANSI Z87.1 standards
- CSA Z94.3 compliant
- Provides 99.9% UV protection
- Patented powerful edge design
- Enhanced field of view
-
Standard Shipping
$11.20
Features
- 13 Ga TEKTYE yarn
- Hook and Loop closure for a secure fit
- Seamless design provides a comfortable fit
- Meets ANSI/ISEA 105 cut level 4
- Vend pack packaging only
-
Standard Shipping
$26.60
Features
- Wire mesh visor.\
- NRR 22db.
- Fits most hard hats.
-
Special Order Shipping
$86.64
Features
- Radians THRXV meets ANSI Z89.1 Type I Class C standards
- Meets EN 12492 Clauses 4.2.1.2; 4.2.1.3; 4.2.1.4
- Low-Profile design with an impact-resistant ABS outer shell
- Vents that promote better air circulation and cooler temperatures
- Ratchet suspension system
-
Standard Shipping
$86.64
Features
- Meets ANSI Z89.1 Type I Class E & G standards
- Meets EN 12492 Clauses 4.2.1.2; 4.2.1.3; 4.2.1.4
- Low-Profile design with an impact-resistant ABS outer shell
- Ratchet suspension system
- Universal accessory slots
-
Standard Shipping
$27.18
Features
- Includes 1 Each: Brow Guard, Back Pad, Comfort Liner
- Replacement pack for the vented and non-vented Titanium helmet
-
Standard Shipping
$17.46
Features
- Class C, Type 1
- Made in the USA
- Venting to Promote Cooling Circulation
- Pillowed Brow Pad
- Nylon Crown Strap Suspensions
-
Standard Shipping
$13.26
Features
- Meets ANSI Z89.1 Type 1 Class G & E Standards
- Made in the USA
- Full Brim
- 4 Point Ratchet Suspension
- Pillowed Brow Pad
-
Standard Shipping
$12.13
Features
- Meets ANSI Z89.1 Type 1 Class G & E Standards
- Made in the USA
- Full Brim
- 6 Point Pinlock Suspension
- Pillowed Brow Pad
-
Standard Shipping
$11.72
Features
- Meets ANSI Z89.1 Type 1 Class G & E Standards
- Made in the USA
- Full Brim
- 4 Point Pinlock Suspension
- Pillowed Brow Pad
-
Standard Shipping
$4.52
Features
- Meets ASTM D6413 FR Standards
- Contrasting Trim Detail.
- Self Extinguishing Treated 100% Polyester Mesh.
- Fits both cap style and full brim hard hats.
- Universal Size
-
Standard Shipping
$6.12
Features
- 4 Point Ratchet Suspension.
- Quick Ratchet Adjustment System.
-
Standard Shipping
$5.80
Features
- 6 Point Pinlock Suspension.
-
Standard Shipping
$5.66
Features
- 4 Point Pinlock Suspension.
-
Standard Shipping
$6.33
Features
- Ratchet Suspension.
- Face shield NOT included.
-
Standard Shipping
$12.92
Features
- Class C, Type 1
- Made in the USA
- venting to Promote Cooling Circulation
- Pillowed Brow Pad
- Nylon Crown Strap Suspensions
-
Standard Shipping
$9.80
Features
- Meets ANSI Z89.1 Type 1 Class G & E Standards
- 6 Point Ratchet Suspension
- Pillowed Brow Pad
- Nylon Crown Strap Suspensions
- Vertical Height Adjustment
-
Standard Shipping
$9.00
Features
- Meets ANSI Z89.1 Type 1 Class G & E Standards
- 6 Point Pinlock Suspension
- Nylon Crown Strap Suspensions
- Cap style
-
Standard Shipping
$7.96
Features
- Meets ANSI Z89.1 Type 1 Class G & E Standards
- Universal Accessory Slots
- Cap Style
- 4 Point Pinlock Suspension
- Pillowed Brow Pad
-
Standard Shipping
$34.66
Features
- Adjustable headband slides to fit most sizes.
- Lightweight durable construction.
-
Standard Shipping
$31.66
Features
- Radians 300-OVM Adjustable headband slides to fit most sizes.
- Lightweight durable construction.
-
Standard Shipping
$11.45 – $11.72
Features
- Meets ANSI Z89.1 Type 1 Class G & E Standards
- Pillowed Brow Pad.
- Nylon Crown Strap Suspensions.
- Nape Cushion on Ratchet Suspension.
- Vertical Height Adjustment.
-
Standard Shipping
$2.54 – $3.18
Features
- Safety Glass meets ANSI Z87.1+ standards.
- Closed cell foam lined channels block debris and eye irritants.
- Full wraparound frame allows for unobstructed peripheral vision.
- Tiny foam lined pockets/vents provide extra fog control.
- Polycarbonate lens provides impact protection.
-
Standard Shipping
$4.56 – $5.41
Features
- Meets ANSI Z87.1 standard.
- Provides 99.9% protection against harmful UV rays.
- Rubber temples wraparound for non-slip comfort.
- Adjustable rubber nosepiece provides all day comfort.
- Wraparound single lens provides an unobstructed field of vision.
-
Standard Shipping
$2.37 – $2.97
Features
- Meets ANSI Z87.1 Standards.
- Provides 99.9% UV Protection.
- Lightweight Comfortable Frame.
- Dual Mold Rubber Temples provides a comfortable fit.
- Adjustable Rubber Nosepiece provides a customized, no-slip fit.
-
Standard Shipping
$4.54 – $6.69
Features
- Safety Glass meets ANSI Z87.1+ standards and provides 99.9% UV protection.
- Original modern style with black and silver frame choices with new electric blue and electric orange lens options.
- Sleek, lightweight full frame protective eyewear.
- Non-slip grip-on temples are dual molded into frame for maximum comfort.
- Polycarbonate lens for impact resistance.
-
Standard Shipping
$14.52 – $14.65
Features
- ANSI Z87.1+
- ANSI Rated D3 & D4 when worn with the rubber gasket with the head strap
- Wire core temples for a custom fit
- Patented cyclonic venting to help combat fogging
- 3-position ratchet temples for adjustable lens angle
-
Standard Shipping
$2.78 – $3.26
Features
- Meets or exceeds ANSI Z87.1 + standards.
- Telescoping Temples for a customized and comfortable fit.
- Ratcheting temples provide lens angle adjustment.
- Designed to fit over most prescription glasses.
- Polycarbonate lens provides impact resistance with a single protective lens design.
